Date: Fri, 7 Feb 2003 11:10:21 +0100 (CET) From: Michael Reifenberger <root@nihil.reifenberger.com> To: FreeBSD-Current <current@freebsd.org> Subject: vinum start & -current doesn't work as expected Message-ID: <20030207105857.T2514@nihil.reifenberger.com>
next in thread | raw e-mail | index | archive | help
Hi, me using -current as of today. I have two firewire disks as: ... da0 at sbp0 bus 0 target 0 lun 0 da0: <Oxford S OXFORD IDE Devic 4133> Fixed Simplified Direct Access SCSI-4 device da0: 50.000MB/s transfers da0: 194481MB (398297088 512 byte sectors: 255H 63S/T 24792C) da1 at sbp0 bus 0 target 1 lun 0 da1: <Oxford S OXFORD IDE Devic 4133> Fixed Simplified Direct Access SCSI-4 device da1: 50.000MB/s transfers da1: 194481MB (398297088 512 byte sectors: 255H 63S/T 24792C) ... They are partitioned as follows: # /dev/da0s1c: type: unknown disk: amnesiac label: flags: bytes/sector: 512 sectors/track: 63 tracks/cylinder: 255 sectors/cylinder: 16065 cylinders: 24792 sectors/unit: 398297025 rpm: 3600 interleave: 1 trackskew: 0 cylinderskew: 0 headswitch: 0 # milliseconds track-to-track seek: 0 # milliseconds drivedata: 0 8 partitions: # size offset fstype [fsize bsize bps/cpg] a: 398296962 63 vinum # (Cyl. 0*- 24792*) c: 398297025 0 unused 0 0 # (Cyl. 0 - 24792*) I used the following config-file for `vinum create`: drive d0 device /dev/da0s1a drive d1 device /dev/da1s1a volume ablage setupstate plex name ablage.p0 org concat sd name ablage.p0.s0 drive d0 size 0b plex name ablage.p1 org concat sd name ablage.p1.s0 drive d1 size 0b After reboot, a `vinum start` gives me: ** no drives found: No such file or directory A `vinum read /dev/da0s1 /dev/da1s1` does work. Any problems known that da0 and da1 are not seen during `vinum start`? Bye! ---- Michael Reifenberger ^.*Plaut.*$, IT, R/3 Basis, GPS To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-current" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20030207105857.T2514>