Date: Thu, 04 Nov 2004 08:45:10 +0500 From: Boris Kovalenko <boris@ntmk.ru> To: freebsd-current@freebsd.org Subject: Re: [FreeBSD 5.3-RC2] Processes STILL hanging in unkillable state Message-ID: <4189A5C6.3030709@ntmk.ru> In-Reply-To: <200411040329.21834.michaelnottebrock@gmx.net> References: <200411020143.34251.gte990t@mail.gatech.edu> <200411020832.29421.marc.ramirez@bluecirclesoft.com> <20041102170921.12f2b8cf@earth.upton.net> <200411040329.21834.michaelnottebrock@gmx.net>
next in thread | previous in thread | raw e-mail | index | archive | help
This is a multi-part message in MIME format.
--------------000604090608080105070407
Content-Type: text/plain; charset=us-ascii; format=flowed
Content-Transfer-Encoding: 7bit
Michael Nottebrock wrote:
Hello!
Sending my configuration. Platform is HP/Compaq D330m uT, PIV 2.4G
(Uni), 512 RAM, Geforce 440 MX video. Please ask more questions as You
need.
>Could all people who are seeing this please post their kernel configurations,
>sysctl.conf and perhaps some system details (platform, UP/MP), too.
>
>Since I and nobody else of the KDE/FreeBSD people have yet seen this problem
>and we're practically all running RELENG_5/RELENG_5_3 all the time, I'm
>curious what might trigger this.
>
>
>
With respect,
Boris
--------------000604090608080105070407
Content-Type: text/plain;
name="BSYS"
Content-Transfer-Encoding: 7bit
Content-Disposition: inline;
filename="BSYS"
#
# GENERIC -- Generic kernel configuration file for FreeBSD/i386
#
# For more information on this file, please read the handbook section on
# Kernel Configuration Files:
#
# http://www.FreeBSD.org/doc/en_US.ISO8859-1/books/handbook/kernelconfig-config.html
#
# The handbook is also available locally in /usr/share/doc/handbook
# if you've installed the doc distribution, otherwise always see the
# FreeBSD World Wide Web server (http://www.FreeBSD.org/) for the
# latest information.
#
# An exhaustive list of options and more detailed explanations of the
# device lines is also present in the ../../conf/NOTES and NOTES files.
# If you are in doubt as to the purpose or necessity of a line, check first
# in NOTES.
#
# $FreeBSD: src/sys/i386/conf/GENERIC,v 1.417 2004/09/10 20:57:46 wpaul Exp $
machine i386
cpu I686_CPU
ident BSYS
# To statically compile in device wiring instead of /boot/device.hints
#hints "GENERIC.hints" # Default places to look for devices.
#options SCHED_ULE # ULE scheduler
options SCHED_4BSD # 4BSD scheduler
options PREEMPTION # Enable kernel thread preemption
options INET # InterNETworking
options FFS # Berkeley Fast Filesystem
options SOFTUPDATES # Enable FFS soft updates support
options UFS_ACL # Support for access control lists
options UFS_DIRHASH # Improve performance on big directories
options MD_ROOT # MD is a potential root device
#options NFSCLIENT # Network Filesystem Client
#options NFSSERVER # Network Filesystem Server
#options NFS_ROOT # NFS usable as /, requires NFSCLIENT
options MSDOSFS # MSDOS Filesystem
options CD9660 # ISO 9660 Filesystem
options PROCFS # Process filesystem (requires PSEUDOFS)
options PSEUDOFS # Pseudo-filesystem framework
options GEOM_GPT # GUID Partition Tables.
options COMPAT_43 # Compatible with BSD 4.3 [KEEP THIS!]
#options COMPAT_FREEBSD4 # Compatible with FreeBSD4
options SCSI_DELAY=15000 # Delay (in ms) before probing SCSI
options KTRACE # ktrace(1) support
options SYSVSHM # SYSV-style shared memory
options SYSVMSG # SYSV-style message queues
options SYSVSEM # SYSV-style semaphores
options _KPOSIX_PRIORITY_SCHEDULING # POSIX P1003_1B real-time extensions
options KBD_INSTALL_CDEV # install a CDEV entry in /dev
options ADAPTIVE_GIANT # Giant mutex is adaptive.
# Debugging for use in -current
#options KDB # Enable kernel debugger support.
#options DDB # Support DDB.
#options GDB # Support remote GDB.
#options INVARIANTS # Enable calls of extra sanity checking
#options INVARIANT_SUPPORT # Extra sanity checks of internal structures, required by INVARIANTS
#options WITNESS # Enable checks to detect deadlocks and cycles
#options WITNESS_SKIPSPIN # Don't run witness on spinlocks for speed
# To make an SMP kernel, the next two are needed
#options SMP # Symmetric MultiProcessor Kernel
device apic # I/O APIC
# Bus support. Do not remove isa, even if you have no isa slots
device isa
device pci
# Floppy drives
device fdc
# ATA and ATAPI devices
device ata
device atadisk # ATA disk drives
device ataraid # ATA RAID drives
device atapicd # ATAPI CDROM drives
device atapifd # ATAPI floppy drives
device atapist # ATAPI tape drives
options ATA_STATIC_ID # Static device numbering
# SCSI peripherals
device scbus # SCSI bus (required for SCSI)
#device ch # SCSI media changers
device da # Direct Access (disks)
#device sa # Sequential Access (tape etc)
#device cd # CD
#device pass # Passthrough device (direct SCSI access)
#device ses # SCSI Environmental Services (and SAF-TE)
# atkbdc0 controls both the keyboard and the PS/2 mouse
device atkbdc # AT keyboard controller
device atkbd # AT keyboard
device psm # PS/2 mouse
device vga # VGA video card driver
device splash # Splash screen and screen saver support
# syscons is the default console driver, resembling an SCO console
device sc
# Enable this for the pcvt (VT220 compatible) console driver
#device vt
#options XSERVER # support for X server on a vt console
#options FAT_CURSOR # start with block cursor
device agp # support several AGP chipsets
# Floating point support - do not disable.
device npx
# Power management support (see NOTES for more options)
#device apm
# Add suspend/resume support for the i8254.
device pmtimer
# Serial (COM) ports
device sio # 8250, 16[45]50 based serial ports
# Parallel port
device ppc
device ppbus # Parallel port bus (required)
device lpt # Printer
#device plip # TCP/IP over parallel
#device ppi # Parallel port interface device
#device vpo # Requires scbus and da
# If you've got a "dumb" serial or parallel PCI card that is
# supported by the puc(4) glue driver, uncomment the following
# line to enable it (connects to the sio and/or ppc drivers):
#device puc
# PCI Ethernet NICs that use the common MII bus controller code.
# NOTE: Be sure to keep the 'device miibus' line in order to use these NICs!
#device miibus # MII bus support
#device bge # Broadcom BCM570xx Gigabit Ethernet
# Pseudo devices.
device loop # Network loopback
device mem # Memory and kernel memory devices
device io # I/O device
device random # Entropy device
device ether # Ethernet support
device pty # Pseudo-ttys (telnet etc)
device md # Memory "disks"
# The `bpf' device enables the Berkeley Packet Filter.
# Be aware of the administrative consequences of enabling this!
device bpf # Berkeley packet filter
# USB support
device uhci # UHCI PCI->USB interface
device ohci # OHCI PCI->USB interface
device usb # USB Bus (required)
#device udbp # USB Double Bulk Pipe devices
device ugen # Generic
device uhid # "Human Interface Devices"
#device ukbd # Keyboard
#device ulpt # Printer
device umass # Disks/Mass storage - Requires scbus and da
#device ums # Mouse
# sound
#device sound
#
options HZ=1000
#
device pf
device pflog
options ALTQ
options ALTQ_CBQ
options ALTQ_RED
options ALTQ_RIO
options ALTQ_HFSC
options ALTQ_CDNR
options ALTQ_PRIQ
#
--------------000604090608080105070407
Content-Type: text/plain;
name="sysctl.conf"
Content-Transfer-Encoding: 7bit
Content-Disposition: inline;
filename="sysctl.conf"
# $FreeBSD: src/etc/sysctl.conf,v 1.8 2003/03/13 18:43:50 mux Exp $
#
# This file is read when going to multi-user and its contents piped thru
# ``sysctl'' to adjust kernel values. ``man 5 sysctl.conf'' for details.
#
# Uncomment this to prevent users from seeing information about processes that
# are being run under another UID.
#security.bsd.see_other_uids=0
hw.snd.pcm0.vchans=4
hw.snd.maxautovchans=4
net.inet.tcp.keepidle=1800000
net.inet.tcp.keepintvl=60000
net.inet.tcp.keepinit=60000
--------------000604090608080105070407
Content-Type: text/plain;
name="loader.conf"
Content-Transfer-Encoding: 7bit
Content-Disposition: inline;
filename="loader.conf"
#
miibus_load="YES"
if_bge_load="YES"
sound_load="YES"
snd_ich_load="YES"
--------------000604090608080105070407--
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?4189A5C6.3030709>