Date: Tue, 23 Feb 1999 00:07:41 -0800 From: Josh MacDonald <jmacd@CS.Berkeley.EDU> To: smp@FreeBSD.ORG, hardware@FreeBSD.ORG Subject: Dell Precision Workstation 410 SMP Message-ID: <19990223000741.18200@helen.CS.Berkeley.EDU>
next in thread | raw e-mail | index | archive | help
I was recently loaned a new Dell and booted 3.1-RELEASE.
It is a dual PII-450 with the 440BX chipset.
I am having some hardware trouble, and the SMP kernel has
paniced in about 2 of 6 or 7 startups, shortly after the
second processor launches. I do not know how to debug, or
help debug this sort of thing.
I think there may be some hardware incompatibilities with
this machine. The ATAPI CD-R drive had some trouble under
Windows NT4 playing audio CDs, there was something too
new about it (NEC 16x). Dell has released an updated driver.
I am unable to mount a CD, it reports:
cd9660: Device not configured
I have been unable to use the on-board sound card, but I didn't
try very hard because I don't know what is wrong.
It has a ZIP drive, and though I boot with a disk inserted
the device reports something about it being buggy and having
no media present.
The graphics device is some crazy 2D and 3D card:
E&S AccelGALAXY 31 video card offers 16Mb of frame
buffer and 15Mb of texture memory with full OpenGL
support. Supports 1280x1024, double buffered with
24-bit Z-buffer.
I doubt this card is supported.
Does anyone know what I can do about any of the above issues, or
how I can help determine if a solution exists?
-josh
dmesg reports:
Copyright (c) 1992-1999 FreeBSD Inc.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
FreeBSD 3.1-RELEASE #0: Mon Feb 22 13:37:13 PST 1999
jmacd@spin.dsl.pacbell.net:/usr/src/sys/compile/SPIN
Timecounter "i8254" frequency 1193182 Hz
CPU: Pentium II/Xeon/Celeron (686-class CPU)
Origin = "GenuineIntel" Id = 0x652 Stepping=2
Features=0x183fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CM
OV,PAT,PSE36,MMX,<b24>>
real memory = 268435456 (262144K bytes)
avail memory = 258641920 (252580K bytes)
Programming 24 pins in IOAPIC #0
FreeBSD/SMP: Multiprocessor motherboard
cpu0 (BSP): apic id: 0, version: 0x00040011, at 0xfee00000
cpu1 (AP): apic id: 1, version: 0x00040011, at 0xfee00000
io0 (APIC): apic id: 2, version: 0x00170011, at 0xfec00000
Probing for devices on PCI bus 0:
chip0: <Intel 82443BX host to PCI bridge> rev 0x02 on pci0.0.0
chip1: <Intel 82443BX host to AGP bridge> rev 0x02 on pci0.1.0
chip2: <Intel 82371AB PCI to ISA bridge> rev 0x02 on pci0.7.0
ide_pci0: <Intel PIIX4 Bus-master IDE controller> rev 0x01 on pci0.7.1
chip3: <Intel 82371AB Power management controller> rev 0x02 on pci0.7.3
xl0: <3Com 3c905B Fast Etherlink XL 10/100BaseTX> rev 0x00 int a irq 19 on pci0.
17.0
xl0: Ethernet address: 00:c0:4f:6b:c5:eb
xl0: autoneg complete, link status good (half-duplex, 10Mbps)
chip4: <PCI to PCI bridge (vendor=1011 device=0024)> rev 0x03 on pci0.19.0
Probing for devices on PCI bus 1:
vga0: <VGA-compatible display device> rev 0x00 int a irq 16 on pci1.0.0
Probing for devices on PCI bus 2:
ahc0: <Adaptec aic7890/91 Ultra2 SCSI adapter> rev 0x00 int a irq 18 on pci2.10.
0
ahc0: aic7890/91 Wide Channel A, SCSI Id=7, 16/255 SCBs
ahc1: <Adaptec aic7880 Ultra SCSI adapter> rev 0x01 int a irq 18 on pci2.14.0
ahc1: aic7880 Wide Channel A, SCSI Id=7, 16/255 SCBs
Probing for devices on the ISA bus:
sc0 on isa
sc0: VGA color <16 virtual consoles, flags=0x0>
atkbdc0 at 0x60-0x6f on motherboard
atkbd0 irq 1 on isa
psm0 irq 12 on isa
psm0: model Generic PS/2 mouse, device ID 0
fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa
fdc0: FIFO enabled, 8 bytes threshold
fd0: 1.44MB 3.5in
wdc1 at 0x170-0x177 irq 15 on isa
wdc1: unit 0 (atapi): <NEC CD-ROM DRIVE:28C/3.02>, removable, dm
a, iordy
acd0: drive speed 2412 - 5512KB/sec, 128KB cache
acd0: supported read types: CD-R, CD-RW, CD-DA
acd0: Audio: play, 256 volume levels
acd0: Mechanism: ejectable tray
acd0: Medium: CD-ROM unknown medium, unlocked
wdc1: unit 1 (atapi): <IOMEGA ZIP 100 ATAPI/14.A>, removable, intr, iordi
s
wfd0: medium type unknown (no disk)
wfd0: buggy Zip drive, 64-block transfer limit set
vga0 at 0x3b0-0x3df maddr 0xa0000 msize 131072 on isa
npx0 on motherboard
npx0: INT 16 interface
sb0 at 0x220 irq 5 drq 1 on isa
snd0: <SoundBlaster Pro 3.2>
sbxvi0 not found
sbmidi0 not found at 0x388
APIC_IO: Testing 8254 interrupt delivery
APIC_IO: routing 8254 via pin 2
Waiting 2 seconds for SCSI devices to settle
SMP: AP CPU #1 Launched!
changing root device to da1s1a
da0 at ahc0 bus 0 target 0 lun 0
da0: <QUANTUM VIKING II 9.1WLS 5520> Fixed Direct Access SCSI-2 device
da0: 80.0MB/s transfers (40.0MHz, offset 31, 16bit), Tagged Queueing Enabled
da0: 8709MB (17836668 512 byte sectors: 255H 63S/T 1110C)
da1 at ahc0 bus 0 target 6 lun 0
da1: <IBM DDRS-34560D DC1B> Fixed Direct Access SCSI-2 device
da1: 80.0MB/s transfers (40.0MHz, offset 15, 16bit), Tagged Queueing Enabled
da1: 4357MB (8925000 512 byte sectors: 255H 63S/T 555C)
PCM device 1 not installed.
PCM device 1 not installed.
(da1:ahc0:0:6:0): tagged openings now 64
My kernel config:
# $Id: GENERIC,v 1.143.2.2 1999/02/15 02:50:07 des Exp $
machine "i386"
cpu "I386_CPU"
cpu "I486_CPU"
cpu "I586_CPU"
cpu "I686_CPU"
ident SPIN
maxusers 32
options MATH_EMULATE #Support for x87 emulation
options INET #InterNETworking
options FFS #Berkeley Fast Filesystem
options FFS_ROOT #FFS usable as root device [keep this!]
options MFS #Memory Filesystem
options MFS_ROOT #MFS usable as root device, "MFS" req'ed
options NFS #Network Filesystem
options NFS_ROOT #NFS usable as root device, "NFS" req'ed
options MSDOSFS #MSDOS Filesystem
options "CD9660" #ISO 9660 Filesystem
options "CD9660_ROOT" #CD-ROM usable as root. "CD9660" req'ed
options PROCFS #Process filesystem
options "COMPAT_43" #Compatible with BSD 4.3 [KEEP THIS!]
options SCSI_DELAY=2000 #Be pessimistic about Joe SCSI device
options UCONSOLE #Allow users to grab the console
options FAILSAFE #Be conservative
options USERCONFIG #boot -c editor
options VISUAL_USERCONFIG #visual boot -c editor
config kernel root on da1
options SMP # Symmetric MultiProcessor Kernel
options APIC_IO # Symmetric (APIC) I/O
controller isa0
controller eisa0
controller pci0
controller fdc0 at isa? port "IO_FD1" bio irq 6 drq 2
disk fd0 at fdc0 drive 0
options "CMD640" # work around CMD640 chip deficiency
controller wdc1 at isa? port "IO_WD2" bio irq 15
disk wd2 at wdc1 drive 0
options ATAPI #Enable ATAPI support for IDE bus
options ATAPI_STATIC #Don't do it as an LKM
device acd0 #IDE CD-ROM
device wfd0 #IDE Floppy (e.g. LS-120)
controller ahc0
controller scbus0
device da0
device sa0
device pass0
device cd0 #Only need one of these, the code dynamically grows
controller atkbdc0 at isa? port IO_KBD tty
device atkbd0 at isa? tty irq 1
device psm0 at isa? tty irq 12
device vga0 at isa? port ? conflicts
pseudo-device splash
device sc0 at isa? tty
device npx0 at isa? port IO_NPX irq 13
device xl0
controller snd0
device sb0 at isa? port 0x220 irq 5 drq 1
device sbxvi0 at isa? drq 0
device sbmidi0 at isa? port 0x388
pseudo-device loop
pseudo-device ether
pseudo-device sl 1
pseudo-device ppp 1
pseudo-device tun 1
pseudo-device pty 16
pseudo-device gzip # Exec gzipped a.out's
options KTRACE #kernel tracing
options SYSVSHM
options SYSVMSG
pseudo-device bpfilter 4 #Berkeley packet filter
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-smp" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?19990223000741.18200>