Date: Thu, 04 Aug 2005 23:47:13 -0400 From: nawcom <nawcom@nawcom.no-ip.com> Cc: freebsd-questions@freebsd.org Subject: Re: bge0: WatchDog Timedout -- resetting in FreeBSD 5.3 Message-ID: <42F2E141.4070607@nawcom.no-ip.com> In-Reply-To: <42F2E102.6040105@nawcom.no-ip.com> References: <dac35acb050804185176cd9767@mail.gmail.com> <42F2E102.6040105@nawcom.no-ip.com>
next in thread | previous in thread | raw e-mail | index | archive | help
are you getting the error on both gigabit cards? i know there is known interupt issues with this SMP setup, and someone i know who was complaining had bge's. he ended up rolling back to fxp, but this was in the 4.x days. do a vmstat -i and see if they are listed with their specific irqs -Ben DeadMan Xia .... wrote: > Is there no one else, who can help me out, from this bge0: WatchDog > Time Out -- resetting ..... > > I m using FreeBSD 5.3, on Dell Power Edge 6650 Quad Processor Machine, > my system get stuck while i m accessing it through ssh. well after > some time , when i acces the machine & check , /var/log/messages ,, i > get bge1: WatchDog Timedout -- resetting error. Is there any one , to > tap my back & get me off from this headhac,,, > Here is the dmesg for my system , > > ACPI APIC Table: <DELL PE6650 > > Timecounter "i8254" frequency 1193182 Hz quality 0 > CPU: Intel(R) Xeon(TM) MP CPU 2.20GHz (2192.90-MHz 686-class CPU) > Origin = "GenuineIntel" Id = 0xf26 Stepping = 6 > Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,C > > MOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> > Hyperthreading: 2 logical CPUs > real memory = 2147352576 (2047 MB) > avail memory = 2095886336 (1998 MB) > FreeBSD/SMP: Multiprocessor System Detected: 8 CPUs > cpu0 (BSP): APIC ID: 0 > cpu1 (AP): APIC ID: 1 > cpu2 (AP): APIC ID: 2 > cpu3 (AP): APIC ID: 3 > cpu4 (AP): APIC ID: 4 > cpu5 (AP): APIC ID: 5 > cpu6 (AP): APIC ID: 6 > cpu7 (AP): APIC ID: 7 > ioapic0: Changing APIC ID to 8 > ioapic1: Changing APIC ID to 9 > ioapic2: Changing APIC ID to 10 > MADT: Forcing active-low polarity and level trigger for SCI > ioapic0 <Version 1.1> irqs 0-15 on motherboard > ioapic1 <Version 1.1> irqs 16-31 on motherboard > ioapic2 <Version 1.1> irqs 32-47 on motherboard > npx0: [FAST] > npx0: <math processor> on motherboard > npx0: INT 16 interface > acpi0: <DELL PE6650> on motherboard > acpi0: Power Button (fixed) > Timecounter "ACPI-safe" frequency 3579545 Hz quality 1000 > acpi_timer0: <32-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 > cpu0: <ACPI CPU> on acpi0 > cpu1: <ACPI CPU> on acpi0 > cpu2: <ACPI CPU> on acpi0 > cpu3: <ACPI CPU> on acpi0 > cpu4: <ACPI CPU> on acpi0 > cpu5: <ACPI CPU> on acpi0 > cpu6: <ACPI CPU> on acpi0 > cpu7: <ACPI CPU> on acpi0 > pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 > pci0: <ACPI PCI bus> on pcib0 > ahc0: <Adaptec aic7892 Ultra160 SCSI adapter> port 0xec00-0xecff mem > 0xfe102000- > 0xfe102fff irq 16 at device 3.0 on pci0 > ahc0: [GIANT-LOCKED] > aic7892: Ultra160 Wide Channel A, SCSI Id=7, 32/253 SCBs > pci0: <display, VGA> at device 4.0 (no driver attached) > atapci0: <ServerWorks CSB5 UDMA100 controller> port > 0x8b0-0x8bf,0x376,0x170-0x17 > 7,0x3f6,0x1f0-0x1f7 at device 15.1 on pci0 > ata0: channel #0 on atapci0 > ata1: channel #1 on atapci0 > ohci0: <OHCI (generic) USB controller> mem 0xfe100000-0xfe100fff irq > 10 at devic > e 15.2 on pci0 > ohci0: [GIANT-LOCKED] > usb0: OHCI version 1.0, legacy support > usb0: SMM does not respond, resetting > usb0: <OHCI (generic) USB controller> on ohci0 > usb0: USB revision 1.0 > uhub0: (0x1166) OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 > uhub0: 2 ports with 2 removable, self powered > isab0: <PCI-ISA bridge> at device 15.3 on pci0 > isa0: <ISA bus> on isab0 > pcib1: <ACPI Host-PCI bridge> on acpi0 > pci3: <ACPI PCI bus> on pcib1 > amr0: <LSILogic MegaRAID> mem 0xfce00000-0xfce0ffff irq 21 at device > 1.0 on pci3 > amr0: [GIANT-LOCKED] > amr0: <LSILogic PERC 4/DC> Firmware 350O, BIOS 1.09, 128MB RAM > pcib2: <ACPI Host-PCI bridge> on acpi0 > pci8: <ACPI PCI bus> on pcib2 > bge0: <Broadcom BCM5700 Gigabit Ethernet, ASIC rev. 0x7104> mem > 0xfcd10000-0xfcd > 1ffff irq 17 at device 1.0 on pci8 > miibus0: <MII bus> on bge0 > brgphy0: <BCM5411 10/100/1000baseTX PHY> on miibus0 > brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX, > 1000baseTX > -FDX, auto > bge0: Ethernet address: 00:11:43:db:68:2a > bge1: <Broadcom BCM5700 Gigabit Ethernet, ASIC rev. 0x7104> mem > 0xfcd00000-0xfcd > 0ffff irq 18 at device 2.0 on pci8 > miibus1: <MII bus> on bge1 > brgphy1: <BCM5411 10/100/1000baseTX PHY> on miibus1 > brgphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX, > 1000baseTX > -FDX, auto > bge1: Ethernet address: 00:11:43:db:68:2b > pcib3: <ACPI Host-PCI bridge> on acpi0 > pci9: <ACPI PCI bus> on pcib3 > pcib4: <ACPI Host-PCI bridge> on acpi0 > pci14: <ACPI PCI bus> on pcib4 > pcib5: <ACPI Host-PCI bridge> on acpi0 > pci19: <ACPI PCI bus> on pcib5 > pcib6: <ACPI Host-PCI bridge> on acpi0 > pci24: <ACPI PCI bus> on pcib6 > fdc0: <floppy drive controller> port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on > acpi0 > fdc0: [FAST] > fd0: <1440-KB 3.5" drive> on fdc0 drive 0 > atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0 > atkbd0: <AT Keyboard> irq 1 on atkbdc0 > kbd0 at atkbd0 > atkbd0: [GIANT-LOCKED] > sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 > on acpi0 > sio0: type 16550A > orm0: <ISA Option ROMs> at iomem 0xec000-0xeffff,0xc0000-0xc7fff on isa0 > pmtimer0 on isa0 > ppc0: parallel port not found. > sc0: <System console> at flags 0x100 on isa0 > sc0: VGA <16 virtual consoles, flags=0x300> > sio1: configured irq 3 not in bitmap of probed irqs 0 > sio1: port may not be enabled > vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 > Timecounters tick every 10.000 msec > ipfw2 initialized, divert disabled, rule-based forwarding enabled, > default to de > ny, logging unlimited > acd0: CDRW <SAMSUNG CDRW/DVD SN-324S/U304> at ata0-master UDMA33 > Waiting 15 seconds for SCSI devices to settle > amrd0: <LSILogic MegaRAID logical drive> on amr0 > amrd0: 69880MB (143114240 sectors) RAID 1 (optimal) > amrd1: <LSILogic MegaRAID logical drive> on amr0 > amrd1: 139760MB (286228480 sectors) RAID 5 (optimal) > ses0 at amr0 bus 0 target 6 lun 0 > ses0: <PE/PV 1x5 SCSI BP 1.1> Fixed Processor SCSI-2 device > ses0: SAF-TE Compliant Device > SMP: AP CPU #2 Launched! > SMP: AP CPU #4 Launched! > SMP: AP CPU #6 Launched! > SMP: AP CPU #1 Launched! > SMP: AP CPU #3 Launched! > SMP: AP CPU #5 Launched! > SMP: AP CPU #7 Launched! > Mounting root from ufs:/dev/amrd0s1a > > > DeadMan Xia ,,,,,, > _______________________________________________ > freebsd-questions@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-questions > To unsubscribe, send any mail to > "freebsd-questions-unsubscribe@freebsd.org" > >
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?42F2E141.4070607>