Date: Fri, 16 Jul 1999 18:08:37 +0200 From: Eric MASSON <e-masson@kisoft-services.com> To: FreeBSD Mobile <freebsd-mobile@freebsd.org> Subject: 3CCFEM556BI pccard sio setup Message-ID: <378F5905.BDAC6A0C@kisoft-services.com>
index | next in thread | raw e-mail
Hello everyone here,
Today is the return of the son of the revenge of the 3CCFEM556BI :). I'm
trying to use the V90 modem function of this card (It is a pccard, not a
cardbus). Driver for NIC function needs to make a port of a linux
existing driver and I miss knowledge to succeed in this task. Back to
current problem, I tried two ways to make it work :
- 1 : enable a sio2 line in kernel and use the following pccard.conf
# PCCARD configuration file
#
# # $Id: pccard.conf,v 1.0 1999/07/04 21:36:00 emss
# Generally available IO ports
io 0x240-0x360
# Generally available IRQs (Built-in sound-card owners remove 5)
irq 10 11 13
# Available memory slots
memory 0xd4000 96k
# 3Com/Megahertz 3CCFEM556BI
card "3Com" "Megahertz 3CCFEM556BI"
config 0x1 "sio2" 10
insert echo 3Com/Megahertz 3CCFEM556BI inserted
remove echo 3Com/Megahertz 3CCFEM556BI removed
pccardd allocates driver sio and sio says "sio2: 8250", weird cause WNT
can link to this card at 115200 bps that sounds more like a 16550 uart.
When i start ppp in manual mode, i do set device = /dev/cuaa2 then term.
At this point the whole machine hangs, the only way to stop it is power
off.
- 2 : do not enable sio2 in kernel configuration and using the same
pccard.conf as before. In this case I do get the following
/kernel: PC-Card VLSI 82C146 (5 mem & 2 I/O windows)
/kernel: pcic: controller irq 9
/kernel: Initializing PC-card drivers: sio
/kernel: Card inserted, slot 0
/kernel: NULL com in siounload
/kernel: Return IRQ=10
pccardd[62]: driver allocation failed for 3Com
pccardd[62]: pccardd started
The dumpcis of this card is :
Code 128 not found
Code 128 not found
code Unknown ignored
Code 131 not found
Code 131 not found
code Unknown ignored
Configuration data for card in slot 0
Tuple #1, code = 0x1 (Common memory descriptor), length = 2
000: 00 ff
Common memory device information:
Device number 1, type No device, WPS = OFF
Speed = No speed, Memory block size = reserved, 32 units
Tuple #2, code = 0x17 (Attribute memory descriptor), length = 3
000: 43 02 ff
Attribute memory device information:
Device number 1, type EEPROM, WPS = OFF
Speed = 150nS, Memory block size = 8Kb, 1 units
Tuple #3, code = 0x20 (Manufacturer ID), length = 4
000: 01 01 56 05
PCMCIA ID = 0x101, OEM ID = 0x556
Tuple #4, code = 0x21 (Functional ID), length = 2
000: 06 00
Network/LAN adapter
Tuple #5, code = 0x15 (Version 1 info), length = 36
000: 04 01 33 43 6f 6d 00 4d 65 67 61 68 65 72 74 7a
010: 20 33 43 43 46 45 4d 35 35 36 42 49 00 41 00 30
020: 30 31 00 ff
Version = 4.1, Manuf = [3Com],card vers = [Megahertz
3CCFEM556BI]
Addit. info = [A],[001]
Tuple #6, code = 0x1a (Configuration map), length = 5
000: 01 03 00 10 3f
Reg len = 2, config register addr = 0x1000, last config = 0x3
Registers: XXXXXX--
Tuple #7, code = 0x1b (Configuration entry), length = 15
000: c1 01 1d 71 55 35 55 54 e0 72 5d 65 30 ff ff
Config index = 0x1(default)
Interface byte = 0x1 (I/O)
Vcc pwr:
Nominal operating supply voltage: 5 x 1V
Max current average over 1 second: 3 x 10mA
Max current average over 10 ms: 5 x 10mA
Power down supply current: 5 x 1mA
Wait scale Speed = 7.0 x 100 ns
RDY/BSY scale Speed = 7.0 x 100 ns
Card decodes 18 address lines, full 8/16 Bit I/O
IRQ modes: Level, Pulse
IRQs: IOCK 1 4 5 6 8 10 11 12 14
Tuple #8, code = 0x19 (JEDEC descr for attribute memory), length = 3
000: 00 00 ff
Tuple #9, code = 0x14 (No link), length = 0
Tuple #10, code = 0x0 (Null tuple), length = 10
000: 02 01 3a 00 af 03 00 00 00 ff
Tuple #11, code = 0x0 (Null tuple), length = 14
000: 30 30 30 30 30 30 30 30 30 30 30 30 00 ff
Tuple #12, code = 0x10 (Checksum), length = 5
000: 8c ff 7d 00 00
Checksum from offset -116, length 125, value is 0x0
Tuple #13, code = 0xff (Terminator), length = 30
000: 7d ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
010: ff ff ff ff ff ff ff ff ff ff ff ff ff ff
2 slots found
The kernel configuration is :
#------------------------------------------------------------------------------
# THINKPAD -- Thinkpad 390 avec disque IDE
#------------------------------------------------------------------------------
# Cree le 12/05/1999
#
machine "i386"
cpu "I686_CPU"
ident THINKPAD
maxusers 32
options INET #InterNETworking
options FFS #Berkeley Fast Filesystem
options FFS_ROOT #FFS usable as root device [keep
this!]
options NFS_NOSERVER #Disable the NFS server code
options PROCFS #Process filesystem
options "COMPAT_43" #Compatible with BSD 4.3 [KEEP
THIS!]
options UCONSOLE #Allow users to grab the console
options FAILSAFE #Be conservative
options USERCONFIG #boot -c editor
options VISUAL_USERCONFIG #visual boot -c editor
config kernel root on wd0
controller isa0
controller pci0
controller fdc0 at isa? port "IO_FD1" bio irq 6 drq 2
disk fd0 at fdc0 drive 0
controller wdc0 at isa? port "IO_WD1" bio irq 14
disk wd0 at wdc0 drive 0
controller wdc1 at isa? port "IO_WD2" bio irq 15
options ATAPI #Enable ATAPI support for IDE bus
options ATAPI_STATIC #Don't do it as an LKM
device acd0 #IDE CD-ROM
controller atkbdc0 at isa? port IO_KBD tty
device atkbd0 at isa? tty irq 1
device psm0 at isa? tty irq 12
device vga0 at isa? port ? conflicts
pseudo-device ether
pseudo-device bpfilter 1
pseudo-device splash
device sc0 at isa? tty
device npx0 at isa? port IO_NPX irq 13
device apm0 at isa? disable flags 0x31 # Advanced Power
Management
device sio0 at isa? port "IO_COM1" tty irq 4 vector siointr
device sio1 at isa? port "IO_COM2" tty irq 3
#device sio2 at isa? port? tty # enabled or not as explained
before
device ppc0 at isa? port? net irq 7
controller ppbus0
device nlpt0 at ppbus?
pseudo-device loop
pseudo-device tun 1
pseudo-device pty 16
pseudo-device gzip # Exec gzipped a.out's
options SYSVSHM
options SYSVSEM
options SYSVMSG
device pcm0 at isa? port 0x530 irq 5 drq 1 flags 0x11
controller card0
device pcic0 at card?
device pcic1 at card?
options PCIC_RESUME_RESET
options POWERFAIL_NMI # make it beep instead of panicing
So, what's wrong with my configuration ?
TIA
Eric MASSON
Ps : I'm running FreeBSD 3.2-STABLE #0: Wed Jul 14
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-mobile" in the body of the message
help
Want to link to this message? Use this
URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?378F5905.BDAC6A0C>