Skip site navigation (1)Skip section navigation (2)
Date:      Sat, 11 Mar 2000 21:07:51 -0500
From:      Mathew Kanner <mat@cs.mcgill.ca>
To:        freebsd-current@freebsd.org
Subject:   RC3: burncd/ata problems
Message-ID:  <20000311210751.A21819@cs.mcgill.ca>

next in thread | raw e-mail | index | archive | help
	I've got a new machine that I was testing FreeBSD out on.  I
had large problems with promise ata controller and fujistsu drives, a
red-herring on the promise site was that they can't run ata66.  Turns
out that the last pci slot on the a-bit BE6-II doesn't work regularly
when the on-board udma66 controller is enabled.

	Problem #1, the CD-R on this system doesn't recongize on the
on board udma66 port but does on the promise PCI card.  However, it
shows up in the bios scan both ways.

	Problem #2, burncd failed with some (not verbatim) 'wrote -1
of nnnnn'.  I'm remote from the machine now so I can't reproduce the
error output that burncd did.  The dmesg that follows has the some of
the errors.


	I'll provide more info if needed.

	--Mat

Copyright (c) 1992-2000 The FreeBSD Project.
Copyright (c) 1982, 1986, 1989, 1991, 1993
        The Regents of the University of California. All rights reserved.
FreeBSD 4.0-20000307-CURRENT #0: Wed Mar  8 00:14:33 GMT 2000
    root@monster.cdrom.com:/usr/src/sys/compile/GENERIC
Timecounter "i8254"  frequency 1193182 Hz
CPU: Pentium III/Pentium III Xeon (551.25-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x673  Stepping = 3
  Features=0x387f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,PN,MMX,FXSR,XMM>
real memory  = 536870912 (524288K bytes)
avail memory = 517152768 (505032K bytes)
Preloaded elf kernel "kernel" at 0xc03be000.
Pentium Pro MTRR support enabled
md0: Malloc disk
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Intel 82443BX (440 BX) host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
pcib1: <Intel 82443BX (440 BX) PCI-PCI (AGP) bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <Matrox MGA G400 AGP graphics accelerator> at 0.0 irq 10
isab0: <Intel 82371AB PCI to ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 ATA33 controller> port 0xf000-0xf00f at device 7.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
pci0: <Intel 82371AB/EB (PIIX4) USB controller> at 7.2 irq 9
chip1: <Intel 82371AB Power management controller> port 0x5000-0x500f at device 7.3 on pci0
xl0: <3Com 3c905B-TX Fast Etherlink XL> port 0x9400-0x947f mem 0xe7060000-0xe706007f irq 9 at device 11.0 on pci0
xl0: Ethernet address: 00:50:da:d6:6a:d0
miibus0: <MII bus> on xl0
xlphy0: <3Com internal media interface> on miibus0
xlphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
xl0: supplying EUI64: 00:50:da:ff:fe:d6:6a:d0
atapci1: <Promise ATA66 controller> port 0xa800-0xa83f,0xa400-0xa403,0xa000-0xa007,0x9c00-0x9c03,0x9800-0x9807 mem 0xe7040000-0xe705ffff irq 11 at device 13.0 on pci0
ata2: at 0x9800 on atapci1
ata3: at 0xa000 on atapci1
atapci2: <Promise ATA66 controller> port 0xbc00-0xbc3f,0xb800-0xb803,0xb400-0xb407,0xb000-0xb003,0xac00-0xac07 mem 0xe7020000-0xe703ffff irq 5 at device 15.0 on pci0
ata4: at 0xac00 on atapci2
ata5: at 0xb400 on atapci2
atapci3: <Promise ATA66 controller> port 0xd000-0xd03f,0xcc00-0xcc03,0xc800-0xc807,0xc400-0xc403,0xc000-0xc007 mem 0xe7000000-0xe701ffff irq 10 at device 17.0 on pci0
ata6: at 0xc000 on atapci3
atapci4: <HighPoint HPT366 ATA66 controller> port 0xdc00-0xdcff,0xd800-0xd803,0xd400-0xd407 irq 11 at device 19.0 on pci0
atapci5: <HighPoint HPT366 ATA66 controller> port 0xe800-0xe8ff,0xe400-0xe403,0xe000-0xe007 irq 11 at device 19.1 on pci0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <keyboard controller (i8042)> at port 0x60-0x6f on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> on isa0
sc0: VGA <16 virtual consoles, flags=0x200>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
ppi0: <Parallel I/O> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
plip0: <PLIP network interface> on ppbus0
ata6-slave: ata_command: timeout waiting for intr
ata6-slave: identify failed
ad0: 26063MB <FUJITSU MPE3273AT> [52953/16/63] at ata0-master using UDMA33
ad4: 26063MB <FUJITSU MPE3273AT> [52953/16/63] at ata2-master using UDMA33
ad6: 26063MB <FUJITSU MPE3273AT> [52953/16/63] at ata3-master using UDMA33
ad8: 26063MB <FUJITSU MPE3273AT> [52953/16/63] at ata4-master using UDMA33
ad10: 26063MB <FUJITSU MPE3273AT> [52953/16/63] at ata5-master using UDMA33
acd0: CDROM <ATAPI CD-ROM DRIVE 40X MAXIMUM> at ata1-master using PIO4
acd1: CD-RW <MATSHITA CD-RW CW-7585> at ata6-master using PIO4
Mounting root from ufs:/dev/ad0s1a
vinum: loaded
vinum: reading configuration from /dev/ad8s1e
vinum: updating configuration from /dev/ad10s1e
vinum: updating configuration from /dev/ad4s1e
vinum: updating configuration from /dev/ad6s1e
xl0: starting DAD for fe80:0001::0250:daff:fed6:6ad0
xl0: DAD complete for fe80:0001::0250:daff:fed6:6ad0 - no duplicates found
cd9660: Joliet Extension
acd1: READ_TOC - ILLEGAL REQUEST asc=24 ascq=00 error=04
acd1: WRITE_BIG - ILLEGAL REQUEST asc=2c ascq=00 error=04
acd1: WRITE_BIG - ILLEGAL REQUEST asc=2c ascq=00 error=04
acd1: WRITE_BIG - ILLEGAL REQUEST asc=2c ascq=00 error=04
acd1: WRITE_BIG - ILLEGAL REQUEST asc=2c ascq=00 error=04
acd1: READ_TOC - ILLEGAL REQUEST asc=24 ascq=00 error=04
acd1: WRITE_BIG - ILLEGAL REQUEST asc=2c ascq=00 error=04
acd1: WRITE_BIG - ILLEGAL REQUEST asc=2c ascq=00 error=04
acd1: WRITE_BIG - ILLEGAL REQUEST asc=2c ascq=00 error=04
acd1: WRITE_BIG - ILLEGAL REQUEST asc=2c ascq=00 error=04
acd1: READ_TOC - ILLEGAL REQUEST asc=24 ascq=00 error=04
acd1: WRITE_BIG - ILLEGAL REQUEST asc=2c ascq=00 error=04
acd1: sequence error (disk already open)
acd1: sequence error (disk already open)
acd1: sequence error (disk already open)
vinum: raid5.p0.s2 is initialized by force
vinum: raid5.p0.s2 is initialized
vinum: raid5.p0.s0 is initialized by force
vinum: raid5.p0.s0 is initialized
vinum: raid5.p0.s1 is initialized by force
vinum: raid5.p0.s1 is initialized
vinum: raid5.p0.s3 is initialized by force
vinum: raid5.p0.s0 is up
vinum: raid5.p0.s1 is up
vinum: raid5.p0.s2 is up
vinum: raid5.p0.s3 is up
vinum: raid5.p0 is up
vinum: raid5 is up
vinum: raid5.p0.s3 is up
acd0: MODE_SENSE_BIG - ILLEGAL REQUEST asc=24 ascq=00 error=00
acd1: sequence error (disk already open)
acd1: sequence error (disk already open)

	


To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-current" in the body of the message




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20000311210751.A21819>