Date: Mon, 20 Nov 2000 03:10:15 -0500 From: Brian Reichert <reichert@numachi.com> To: Ben Lutgens <blutgens@usinternet.com> Cc: mobile@freebsd.org Subject: Re: PCMPC100 problem still not working Message-ID: <20001120031015.A9537@numachi.com> In-Reply-To: <20001119223118.A1052@ares.usinternet.com>; from blutgens@usinternet.com on Sun, Nov 19, 2000 at 10:31:18PM -0600 References: <20001119223118.A1052@ares.usinternet.com>
next in thread | previous in thread | raw e-mail | index | archive | help
On Sun, Nov 19, 2000 at 10:31:18PM -0600, Ben Lutgens wrote: I had to make a couple of changes for my el cheapo LinkSys card; see if they work for you: > O.k. I am a little confused about the kernel / driver / pccardd separation. > Does pccardd need drivers and stuff compiled in the kernel? > I have the line > device ed0 at isa? port 0x300 irq 9 iomem 0xd8000 in my config file for try replacing this with: device ed > my kernel. and I see an ed1 show up in output from pccardd and I keep getting > ed1 timed out in the logs and the card is essentially useless even though I > get a nice "BEEP" that tells me my card is alive and well and the interface > shows up I can't ping anything. > > when I comment this line out of the kernel config and recompile i get unable > to allocate driver error which makes me think it should be compiled in. > > the exact lines are > ed0: Device not configured > (then the lines showing that my card matched the def in pccard.conf) > pccardd:[53]: driver allocation failed for Linksys Etherfast 10/100 PC Card > (PCMPC100 V2)): Device not configured Pccardf started. > > also, my box hangs during "local package initialization" and needs a ^c to > continue for some reason. can anyone tell me where to look to fix that. > > once again the relevant files are > rc.conf > pccard_enable="yes" > pccard_mem="0xd8000" > pccard_beep="1" > pccard_ifconfig="inet MYIP netmask 255.255.255.248" > pccard_conf="/etc/pccard.conf" > > pccard.conf > io 0x240-0x260 > irq 9 13 > card "Linksys" "Etherfast 10/100 PC Card (PCMPC100 V2)" > config 0x3 "ed" ? Try config default "ed" ? > insert /etc/pccard_ether $device > remove /sbin/ifconfig $device delete > > -- > Ben Lutgens Cell: 651.387.9065 Home: 651.703.9541 > > > Backup not found: (A)bort (R)etry (T)hrowup > ------------------------------------------------------------------------------- -- Brian 'you Bastard' Reichert <reichert@numachi.com> 37 Crystal Ave. #303 Daytime number: (603) 434-6842 Derry NH 03038-1713 USA Intel architecture: the left-hand path To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20001120031015.A9537>