Date: Mon, 6 Sep 2010 11:36:34 -0700 From: Jack Vogel <jfvogel@gmail.com> To: Gareth de Vaux <bsd@lordcow.org> Cc: stable@freebsd.org Subject: Re: MSIX failure Message-ID: <AANLkTinOxtfJ_BhJape3LDowynx1eOpOW7zCPTime%2BYi@mail.gmail.com> In-Reply-To: <20100906155350.GA50151@lordcow.org> References: <20100906155350.GA50151@lordcow.org>
next in thread | previous in thread | raw e-mail | index | archive | help
In the future make sure that you put E1000 or EM in the title otherwise I might miss it, fortunately I looked at this :) I'm on a holiday weekend, I will investigate this tomorrow. Jack On Mon, Sep 6, 2010 at 8:53 AM, Gareth de Vaux <bsd@lordcow.org> wrote: > Hi all, I moved from 8.0-RELEASE to last week's -STABLE: > > $ uname -v > FreeBSD 8.1-STABLE #0: Thu Sep 2 16:38:02 SAST 2010 root@XXXXX > :/usr/obj/usr/src/sys/GENERIC > > and all seems well except my network card is unusable. On boot up: > > em0: <Intel(R) PRO/1000 Network Connection 7.0.5> port 0x3040-0x305f mem > 0xe3200000-0xe321ffff,0xe3220000-0xe3220fff irq 10 at device 25.0 on pci0 > em0: Setup MSIX failure > em0: [FILTER] > em0: Ethernet address: 00:27:0e:1e:5e:e3 > > em1: <Intel(R) PRO/1000 Legacy Network Connection 1.0.1> port 0x1000-0x103f > mem 0xe3120000-0xe313ffff,0xe3100000-0xe311ffff irq 9 at device 1.0 on pci5 > em1: [FILTER] > em1: Ethernet address: 00:1b:21:5b:f2:18 > > > em0 is a PCI 'Intel(R) PRO/1000 GT Desktop Adapter' which worked up until > now. > em1 is onboard which didn't work with 8.0-RELEASE either. > > > $ ifconfig em0 > em0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500 > > options=219b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM,TSO4,WOL_MAGIC> > ether 00:27:0e:1e:5e:e3 > inet XXXXXXXX > media: Ethernet autoselect > status: no carrier > > > pciconf -lv: > > em0@pci0:0:25:0: class=0x020000 card=0x00008086 chip=0x10f08086 > rev=0x05 hdr=0x00 > vendor = 'Intel Corporation' > class = network > subclass = ethernet > > em1@pci0:5:1:0: class=0x020000 card=0x13768086 chip=0x107c8086 rev=0x05 > hdr=0x00 > vendor = 'Intel Corporation' > device = 'Gigabit Ethernet Controller (Copper) rev 5 (82541PI)' > class = network > subclass = ethernet > > (no device listing for em0) > > Swapping the PCI card with a PCI-X version gives the same behaviour. > Setting > hw.pci.enable_msix and hw.pci.enable_msi to 0 doesn't help in either case. > _______________________________________________ > freebsd-stable@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-stable > To unsubscribe, send any mail to "freebsd-stable-unsubscribe@freebsd.org" >
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?AANLkTinOxtfJ_BhJape3LDowynx1eOpOW7zCPTime%2BYi>