Skip site navigation (1)Skip section navigation (2)
Date:      Wed, 28 Jul 2004 15:53:41 -0700 (PDT)
From:      asfdqwer xzcvdsf <brueggma@yahoo.com>
To:        current@freebsd.org
Subject:   fatal trap / spin lock - src from 7/16/04
Message-ID:  <20040728225341.60644.qmail@web21322.mail.yahoo.com>

next in thread | raw e-mail | index | archive | help

I just got this after a reboot:


boot() called on cpu#0
Waiting (max 60 seconds) for system process `vnlru' to
stop...
Process 'vnlru' stopped.
Waiting (max 60 seconds) for system process
`bufdaemon' to stop...
Process 'bufdaemon' stopped.
Waiting (max 60 seconds) for system process `syncer'
to stop...
Syncer syncing, vnodes remaining... 8 1 2 0 done.
Process 'syncer' stopped.
done
Uptime: 20h55m21s
Rebooting...
cpu_reset called on cpu#0
cpu_reset: Stopping other CPUs
Console: serial port
BIOS drive A: is disk0
BIOS drive C: is disk1
BIOS 640kB/2096128kB available memory

FreeBSD/i386 bootstrap loader, Revision 1.1
(root@athlon1.bsdnut.org, Sat Jul 10 22:18:32 CDT
2004)
Loading /boot/defaults/loader.conf
/boot/kernel/kernel text=0x432bec data=0x77524+0x45258
syms=[0x4+0x52290+0x4+0x64e85]
|

 ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿
 ³                                         ³
 ³                                         ³          
   ,        ,
 ³                                         ³          
  /(        )`
 ³          Welcome to FreeBSD!            ³          
  \ \___   / |
 ³                                         ³          
  /- _  `-/  '
 ³                                         ³          
 (/\/ \ \   /\
 ³  1. Boot FreeBSD [default]              ³          
 / /   | `    \
 ³  2. Boot FreeBSD with ACPI enabled      ³          
 O O   ) /    |
 ³  3. Boot FreeBSD in Safe Mode           ³          
 `-^--'`<     '
 ³  4. Boot FreeBSD in single user mode    ³          
(_.)  _  )   /
 ³  5. Boot FreeBSD with verbose logging   ³          
 `.___/`    /
 ³  6. Escape to loader prompt             ³          
   `-----' /
 ³  7. Reboot                              ³ <----.   
 __ / __   \
 ³                                         ³
<----|====O)))==) \) /====
 ³                                         ³ <----'   
`--' `.__,' \
 ³                                         ³          
   |        |
 ³                                         ³          
    \       /       /\
 ³  Select option, [Enter] for default     ³         
______( (_  / \______/
 ³  or [Space] to pause timer  9           ³        ,'
 ,-----'   |
 ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ       
`--{__________)

Copyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989,
1991, 1992, 1993, 1994
        The Regents of the University of California.
All rights reserved.
FreeBSD 5.2-CURRENT #0: Fri Jul 16 16:09:31 CDT 2004
   
root@athlon1.bsdnut.org:/usr/obj/usr/src/sys/ATHLON
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: AMD Athlon(tm) MP 1900+ (1600.06-MHz 686-class
CPU)
  Origin = "AuthenticAMD"  Id = 0x662  Stepping = 2
 
Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
  AMD Features=0xc0480000<MP,AMIE,DSP,3DNow!>
real memory  = 2147483648 (2048 MB)
avail memory = 2096091136 (1998 MB)
MPTable: <OEM00000 PROD00000000>
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
 cpu0 (BSP): APIC ID:  0
 cpu1 (AP): APIC ID:  1
ioapic0: Assuming intbase of 0
ioapic0 <Version 1.1> irqs 0-23 on motherboard
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <MPTable Host-PCI bridge> at pcibus 0 on
motherboard
pci0: <PCI bus> on pcib0
agp0: <AMD 762 host to AGP bridge> port 0xe000-0xe003
mem 0xfd060000-0xfd060fff,0xe8000000-0xefffffff at
device 0.0 on pci0
pcib1: <MPTable PCI-PCI bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <display, VGA> at device 5.0 (no driver
attached)
isab0: <PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <AMD 768 UDMA100 controller> port
0xd000-0xd00f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at
device 7.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
pci0: <bridge, PCI-unknown> at device 7.3 (no driver
attached)
pci0: <multimedia, audio> at device 7.5 (no driver
attached)
em0: <Intel(R) PRO/1000 Network Connection, Version -
1.7.25> port 0xdc00-0xdc3f mem
0xfd000000-0xfd03ffff,0xfd040000-0xfd05ffff irq 17 at
device 9.0 on pci0
em0: [GIANT-LOCKED]
em0: Ethernet address: 00:04:23:a7:c3:90
em0:  Speed:N/A  Duplex:N/A
pcib2: <MPTable PCI-PCI bridge> at device 16.0 on pci0
pci2: <PCI bus> on pcib2
ohci0: <OHCI (generic) USB controller> mem
0xfc001000-0xfc001fff irq 19 at device 0.0 on pci2
ohci0: [GIANT-LOCKED]
usb0: OHCI version 1.0, legacy support
usb0: <OHCI (generic) USB controller> on ohci0
usb0: USB revision 1.0
uhub0: AMD OHCI root hub, class 9/0, rev 1.00/1.00,
addr 1
uhub0: 4 ports with 4 removable, self powered
ahc0: <Adaptec 2940 Ultra SCSI adapter> port
0xc000-0xc0ff mem 0xfc000000-0xfc000fff irq 17 at
device 5.0 on pci2
ahc0: [GIANT-LOCKED]
aic7880: Ultra Wide Channel A, SCSI Id=7, 16/253 SCBs
cpu0 on motherboard
cpu1 on motherboard
orm0: <ISA Option ROMs> at iomem
0xcc000-0xcc7ff,0xc0000-0xc8fff on isa0
pmtimer0 on isa0
atkbdc0: <Keyboard controller (i8042)> at port
0x64,0x60 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
fdc0: <Enhanced floppy controller (i82077, NE72065 or
clone)> at port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on isa0
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on
isa0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x100>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A, console
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem
0xa0000-0xbffff on isa0
unknown: <PNP0303> can't assign resources (port)
unknown: <PNP0501> can't assign resources (port)
unknown: <PNP0700> can't assign resources (port)
unknown: <PNP0400> can't assign resources (port)
unknown: <PNP0501> can't assign resources (port)
Timecounters tick every 1.000 msec
ad0: 117800MB <IC35L120AVVA07-0> [239340/16/63] at
ata0-master UDMA100
ata1-slave: FAILURE - ATAPI_RESET no interrupt
acd0: CDROM <CDU5211> at ata1-slave PIO4
em0: Link is up 100 Mbps Half Duplex
sa0 at ahc0 bus 0 target 0 lun 0
sa0: <EXABYTE EXB-89008E030203 V39e> Removable
Sequential Access SCSI-2 device
sa0: 20.000MB/s transfers (10.000MHz, offset 8, 16bit)
SMP: AP CPU #1 Launched!
Mounting root from ufs:/dev/ad0s1a
Pre-seeding PRNG: kickstart.
Loading configuration files.
Entropy harvesting: interrupts ethernet point_to_point
kickstart.
Starting file system checks:
/dev/ad0s1a: FILE SYSTEM CLEAN; SKIPPING CHECKS
/dev/ad0s1a: clean, 50230696 free (155008 frags,
6259461 blocks, 0.3% fragmentation)
/dev/ad0s1b: FILE SYSTEM CLEAN; SKIPPING CHECKS
/dev/ad0s1b: clean, 393100 free (28 frags, 49134
blocks, 0.0% fragmentation)
Adding /usr/swap0 as additional swap


Fatal trap 12: page fault while in kernel mode
cpuid = 1; apic id = 01
fault virtual address   = 0x8
fault code              = supervisor read, page not
present
instruction pointer     = 0x8:0xc06070dc
stack pointer           = 0x10:0xdd431c8c
frame pointer           = 0x10:0xdd431c98
code segment            = base 0x0, limit 0xfffff,
type 0x1b
                        = DPL 0, pres 1, def32 1, gran
1
processor eflags        = interrupt enabled, resume,
IOPL = 0
current process         = 2 (g_event)
trap number             = 12
panic: page fault
cpuid = 1;
boot() called on cpu#1
Syncer sy
Fatal double fault:
eip = 0xc07be090
esp = 0xdd415000
ebp = 0xdd41501c
cpuid = 1; apic id = 01
panic: double fault
cpuid = 1;
boot() called on cpu#1
spin lock sched lock held by 0xc3463580 for > 5
seconds




		
__________________________________
Do you Yahoo!?
Yahoo! Mail is new and improved - Check it out!
http://promotions.yahoo.com/new_mail



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20040728225341.60644.qmail>