Date: Sat, 19 Jul 2008 13:09:14 -0500 From: Stephen Bader <sbader@comcast.net> To: Sean Bruno <sbruno@miralink.com> Cc: freebsd-firewire@freebsd.org Subject: Re: Western Digital 1TB My Book Studio Message-ID: <659410C6-789D-48CA-A83D-2C5C2029D6F0@comcast.net> In-Reply-To: <48822BA0.4020803@miralink.com> References: <071820082029.21468.4880FD440005BA24000053DC22007348409D0A0B0E0D9C@comcast.net> <48810C51.8020708@miralink.com> <16A05533-344E-41AD-8ADE-2D601C0E766B@comcast.net> <488121F1.4080907@miralink.com> <31CF633F-F559-4310-A14E-EFAAF14F6442@comcast.net> <48820BDE.1060608@miralink.com> <663A347B-CBBF-4164-9411-11C272E56D9A@comcast.net> <48822BA0.4020803@miralink.com>
next in thread | previous in thread | raw e-mail | index | archive | help
Alright, here is the output with debug's set to 2. I hope this makes some kind of sense to you, it makes none to me :) fwohci0: BUS reset sbp_post_busreset fwohci0: node_id=0x8800ffc0, gen=6, non CYCLEMASTER mode firewire0: 2 nodes, maxhop <= 1, cable IRM = 0 (me) fwohci0: fw_set_bus_manager: 0->0 (loop=0) firewire0: root node is not cycle master capable firewire0: bus manager 0 (me) send phy_config root_node=0 gap_count=5 fwohci0: start AT DMA status=11 Current DB 0 ch = 0 Current OP KEY INT BR len Addr Depend Stat: Cnt 3df69980 OUTL ST2 ALL ALL 12 00000000 3df69a00 8411:269f RUN,ACTIVE, ack complete(11) 0x000000e0 0x00c50000 0xff3affff 0x00000000 fwohci0: too many cycle lost, no cycle master presents? fw_get_tlabel: dst=65473 tl=15 Current DB 0 ch = 0 Current OP KEY INT BR len Addr Depend Stat: Cnt 3df69a00 OUTL ST2 ALL ALL 12 00000000 3df69a80 8412:2e6d RUN,ACTIVE, ack pend(12) 0x00803d40 0xffc1ffff 0xf0000400 0x00000000 fw_get_tlabel: dst=65473 tl=16 Current DB 0 ch = 0 Current OP KEY INT BR len Addr Depend Stat: Cnt 3df69a80 OUTL ST2 ALL ALL 12 00000000 3df69b00 8412:2f39 RUN,ACTIVE, ack pend(12) 0x00804140 0xffc1ffff 0xf0000404 0x00000000 fw_get_tlabel: dst=65473 tl=17 Current DB 0 ch = 0 Current OP KEY INT BR len Addr Depend Stat: Cnt 3df69b00 OUTL ST2 ALL ALL 12 00000000 3df69b80 8412:2f6b RUN,ACTIVE, ack pend(12) 0x00804540 0xffc1ffff 0xf0000408 0x00000000 fw_get_tlabel: dst=65473 tl=18 Current DB 0 ch = 0 Current OP KEY INT BR len Addr Depend Stat: Cnt 3df69b80 OUTL ST2 ALL ALL 12 00000000 3df69c00 8412:2fb4 RUN,ACTIVE, ack pend(12) 0x00804940 0xffc1ffff 0xf000040c 0x00000000 fw_get_tlabel: dst=65473 tl=19 Current DB 0 ch = 0 Current OP KEY INT BR len Addr Depend Stat: Cnt 3df69c00 OUTL ST2 ALL ALL 12 00000000 3df69c80 8412:302c RUN,ACTIVE, ack pend(12) 0x00804d40 0xffc1ffff 0xf0000410 0x00000000 node1: crom unchanged fw_explore: node 2, err = 0 bus_explore done sbp_post_explore (sbp_cold=0) sbp_post_explore: EUI:0090a9341b93f349 attached sbp_probe_target 0 target 0 lun 0 found target 0 lun 1 found sbp0:0:0 ordered:1 type:0 EUI:0090a9341b93f349 node:1 speed:3 maxrec:0 new! sbp0:0:0 'WD' 'My Book' '001025' sbp_login: sec = 0 usec = 675845 ticks = 675 sbp_probe_target: detected non sequential access device(77). skipping sbp0:0:0 LOGIN sbp: alloc 4 xfer sbp0:0:0 mgm orb: 010d33c4 fw_get_tlabel: dst=65473 tl=20 Current DB 0 ch = 0 Current OP KEY INT BR len Addr Depend Stat: Cnt 3df69c80 OUTM ST2 NEV NEV 16 00000000 00000000 0000:0000 Nostat 0x00835110 0xffc1ffff 0xf0030000 0x00080000 3df69c80 OUTL ST0 ALL ALL 8 3dc5fc10 3df69d00 8472:468a RUN,ACTIVE, ack pend(12) sbp0:0:0 sbp_mgm_callback sbp0:0:0 request timeout(mgm orb:0x010d33c4) ... reset start sbp0:0:0 sbp_reset_start fw_get_tlabel: dst=65473 tl=21 Current DB 0 ch = 0 Current OP KEY INT BR len Addr Depend Stat: Cnt 3df69d00 OUTL ST2 ALL ALL 16 00000000 3df69d80 8472:e687 RUN,ACTIVE, ack pend(12) 0x00835500 0xffc1ffff 0xf000000c 0x0f000000 firewire0: split transaction timeout dst=0xffc1 tl=0x15 state=3 sbp0:0:0 sbp_reset_start failed: resp=60 fwohci0: BUS reset sbp_post_busreset fwohci0: node_id=0xc800ffc1, gen=7, CYCLEMASTER mode firewire0: 2 nodes, maxhop <= 1, cable IRM = 1 (me) fwohci0: fw_set_bus_manager: 1->1 (loop=0) firewire0: bus manager 1 (me) send phy_config root_node=1 gap_count=5 fwohci0: start AT DMA status=72 Current DB 0 ch = 0 Current OP KEY INT BR len Addr Depend Stat: Cnt 3df69d80 OUTL ST2 ALL ALL 12 00000000 3df69e00 8411:8e92 RUN,ACTIVE, ack complete(11) 0x000000e0 0x01c50000 0xfe3affff 0x00000000 fw_get_tlabel: dst=65472 tl=22 Current DB 0 ch = 0 Current OP KEY INT BR len Addr Depend Stat: Cnt 3df69e00 OUTL ST2 ALL ALL 12 00000000 3df69e80 8412:9661 RUN,ACTIVE, ack pend(12) 0x00805940 0xffc0ffff 0xf0000400 0x00000000 fw_get_tlabel: dst=65472 tl=23 Current DB 0 ch = 0 Current OP KEY INT BR len Addr Depend Stat: Cnt 3df69e80 OUTL ST2 ALL ALL 12 00000000 3df69f00 8412:9716 RUN,ACTIVE, ack pend(12) 0x00805d40 0xffc0ffff 0xf0000404 0x00000000 fw_get_tlabel: dst=65472 tl=24 Current DB 0 ch = 0 Current OP KEY INT BR len Addr Depend Stat: Cnt 3df69f00 OUTL ST2 ALL ALL 12 00000000 3df69f80 8412:9741 RUN,ACTIVE, ack pend(12) 0x00806140 0xffc0ffff 0xf0000408 0x00000000 fw_get_tlabel: dst=65472 tl=25 Current DB 0 ch = 0 Current OP KEY INT BR len Addr Depend Stat: Cnt 3df69f80 OUTL ST2 ALL ALL 12 00000000 3df68000 8412:9783 RUN,ACTIVE, ack pend(12) 0x00806540 0xffc0ffff 0xf000040c 0x00000000 fw_get_tlabel: dst=65472 tl=26 Current DB 0 ch = 0 Current OP KEY INT BR len Addr Depend Stat: Cnt 3df68000 OUTL ST2 ALL ALL 12 00000000 3df68080 8412:97f4 RUN,ACTIVE, ack pend(12) 0x00806940 0xffc0ffff 0xf0000410 0x00000000 node0: crom unchanged fw_explore: node 2, err = 0 bus_explore done sbp_post_explore (sbp_cold=0) sbp_post_explore: EUI:0090a9341b93f349 attached sbp_probe_target 0 target 0 lun 0 found target 0 lun 1 found sbp0:0:0 ordered:1 type:0 EUI:0090a9341b93f349 node:0 speed:3 maxrec:0 new! sbp0:0:0 'WD' 'My Book' '001025' sbp_login: sec = 0 usec = 682474 ticks = 682 sbp_probe_target: detected non sequential access device(77). skipping sbp0:0:0 LOGIN sbp: alloc 5 xfer sbp0:0:0 mgm orb: 010d34fc fw_get_tlabel: dst=65472 tl=27 Current DB 0 ch = 0 Current OP KEY INT BR len Addr Depend Stat: Cnt 3df68080 OUTM ST2 NEV NEV 16 00000000 00000000 0000:0000 Nostat 0x00836d10 0xffc0ffff 0xf0030000 0x00080000 3df68080 OUTL ST0 ALL ALL 8 3df4a7a0 3df68100 8472:ae85 RUN,ACTIVE, ack pend(12) sbp0:0:0 sbp_mgm_callback sbp0:0:0 request timeout(mgm orb:0x010d34fc) ... reset start sbp0:0:0 sbp_reset_start fw_get_tlabel: dst=65472 tl=28 Current DB 0 ch = 0 Current OP KEY INT BR len Addr Depend Stat: Cnt 3df68100 OUTL ST2 ALL ALL 16 00000000 3df68180 8472:4e83 RUN,ACTIVE, ack pend(12) 0x00837100 0xffc0ffff 0xf000000c 0x0f000000 -Steve On Jul 19, 2008, at 1:00 PM, Sean Bruno wrote: > Stephen Bader wrote: >> Still not working. Looks like we're getting the 'reset start' >> errors again: >> >> fwohci0: BUS reset >> sbp_post_busreset >> fwohci0: node_id=0xc800ffc0, gen=2, CYCLEMASTER mode >> firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me) >> fwohci0: fw_set_bus_manager: 0->0 (loop=0) >> firewire0: bus manager 0 (me) >> send phy_config root_node=-1 gap_count=5 >> fwohci0: start AT DMA status=72 >> bus_explore done >> sbp_post_explore (sbp_cold=1) >> sbp_post_explore: EUI:0090a9341b93f349 not attached, state=3. >> target 0 lun 0 found >> target 0 lun 1 found >> sbp_probe_target: detected non sequential access device(77). >> skipping >> fwohci0: BUS reset >> sbp_post_busreset >> fwohci0: node_id=0x8800ffc0, gen=3, non CYCLEMASTER mode >> firewire0: 2 nodes, maxhop <= 1, cable IRM = 0 (me) >> fwohci0: fw_set_bus_manager: 0->0 (loop=0) >> firewire0: root node is not cycle master capable >> firewire0: bus manager 0 (me) >> send phy_config root_node=0 gap_count=5 >> fwohci0: start AT DMA status=11 >> fwohci0: too many cycle lost, no cycle master presents? >> node1: crom unchanged >> fw_explore: node 2, err = 0 >> bus_explore done >> sbp_post_explore (sbp_cold=0) >> sbp_post_explore: EUI:0090a9341b93f349 attached >> target 0 lun 0 found >> target 0 lun 1 found >> sbp0:0:0 ordered:1 type:0 EUI:0090a9341b93f349 node:1 speed:3 >> maxrec:0 new! >> sbp0:0:0 'WD' 'My Book' '001025' >> sbp_login: sec = 0 usec = 675467 ticks = 675 >> sbp_probe_target: detected non sequential access device(77). >> skipping >> sbp0:0:0 LOGIN >> sbp: alloc 2 xfer >> sbp0:0:0 mgm orb: 010d3154 >> sbp0:0:0 request timeout(mgm orb:0x010d3154) ... reset start >> sbp0:0:0 sbp_reset_start >> firewire0: split transaction timeout dst=0xffc1 tl=0x7 state=3 >> sbp0:0:0 sbp_reset_start failed: resp=60 >> fwohci0: BUS reset >> sbp_post_busreset >> fwohci0: node_id=0xc800ffc1, gen=4, CYCLEMASTER mode >> firewire0: 2 nodes, maxhop <= 1, cable IRM = 1 (me) >> fwohci0: fw_set_bus_manager: 1->1 (loop=0) >> firewire0: bus manager 1 (me) >> send phy_config root_node=1 gap_count=5 >> fwohci0: start AT DMA status=72 >> node0: crom unchanged >> fw_explore: node 2, err = 0 >> bus_explore done >> sbp_post_explore (sbp_cold=0) >> sbp_post_explore: EUI:0090a9341b93f349 attached >> target 0 lun 0 found >> target 0 lun 1 found >> sbp0:0:0 ordered:1 type:0 EUI:0090a9341b93f349 node:0 speed:3 >> maxrec:0 new! >> sbp0:0:0 'WD' 'My Book' '001025' >> sbp_login: sec = 0 usec = 682939 ticks = 682 >> sbp_probe_target: detected non sequential access device(77). >> skipping >> sbp0:0:0 LOGIN >> sbp: alloc 3 xfer >> sbp0:0:0 mgm orb: 010d328c >> sbp0:0:0 request timeout(mgm orb:0x010d328c) ... reset start >> sbp0:0:0 sbp_reset_start >> >> -Steve >> >> > Ok, change the debug level to 2 (firewire_debug and sbp_debug > sysctl's) and email me the result. We'll get this eventually! > > > -- > Sean Bruno > MiraLink Corporation > 6015 NE 80th Ave, Ste 100 > Portland, OR 97218 > Cell 503-358-6832 > Phone 503-621-5143 > Fax 503-621-5199 > MSN: sbruno@miralink.com > Google: seanwbruno@gmail.com >
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?659410C6-789D-48CA-A83D-2C5C2029D6F0>