Date: Sun, 26 Sep 2004 14:58:06 -0400 From: Aaron <acarranza@nubiandirections.org> To: FreeBSD-questions@FreeBSD.org Subject: help please Message-ID: <200409261458.06180.acarranza@nubiandirections.org>
next in thread | raw e-mail | index | archive | help
--Boundary-00=_+ExVB0HYURhPuK+
Content-Type: text/plain;
charset="us-ascii"
Content-Transfer-Encoding: 7bit
Content-Disposition: inline
I will like to thank you before hand for what you are doing for bsd user.
I am a new bsd user who is trying to learn how to buil a kernel or custimize
it. I am reading the book absolute bsd and I am using 5.1 version
. I followed the step in configuring my kernel. I ran the cvsup update before
trying to build the kernel so everything will be up to date. However, I am
getting these messeges
SecondAdvent# cd /usr/src/sys/i386/conf
SecondAdvent# ls
GENERIC Makefile OLDCARD SECONDADVENT
GENERIC.hints NOTES PAE gethints.awk
SecondAdvent# config SECONDADVENT
ERROR: version of config(8) does not match kernel!
config version = 500012, version required = 600000
Make sure that /usr/src/usr.sbin/config is in sync
with your /usr/src/sys and install a new config binary
before trying this again.
If running the new config fails check your config
file against the GENERIC or LINT config files for
changes in config syntax, or option/device naming
conventions
SecondAdvent#
Here is the output of uname -a
SecondAdvent# uname -a
FreeBSD SecondAdvent.hvc.rr.com 5.1-RELEASE FreeBSD 5.1-RELEASE #0: Thu Jun 5
02:55:42 GMT 2003 root@wv1u.btc.adaptec.com:/usr/obj/usr/src/sys/GENERIC
i386
SecondAdvent#
Hope you could please help me thank you.
Aaron Carranza
--Boundary-00=_+ExVB0HYURhPuK+
Content-Type: text/plain;
charset="us-ascii";
name="dmesg"
Content-Transfer-Encoding: 7bit
Content-Disposition: attachment; filename="dmesg"
SecondAdvent# dmesg
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.1-RELEASE #0: Thu Jun 5 02:55:42 GMT 2003
root@wv1u.btc.adaptec.com:/usr/obj/usr/src/sys/GENERIC
Preloaded elf kernel "/boot/kernel/kernel" at 0xc0689000.
Timecounter "i8254" frequency 1193182 Hz
Timecounter "TSC" frequency 298535327 Hz
CPU: Pentium II/Pentium II Xeon/Celeron (298.54-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x66a Stepping = 10
Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PA
T,PSE36,MMX,FXSR>
real memory = 100597760 (95 MB)
avail memory = 90644480 (86 MB)
Pentium Pro MTRR support enabled
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcibios: BIOS version 2.10
Using $PIR table, 8 entries at 0xc00fdf40
pcib0: <Intel 82443BX (440 BX) host to PCI bridge> at pcibus 0 on motherboard
pci0: <PCI bus> on pcib0
agp0: <Intel 82443BX (440 BX) host to PCI bridge> mem 0xf8000000-0xfbffffff at d
evice 0.0 on pci0
pcib1: <PCIBIOS PCI-PCI bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <display, VGA> at device 0.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 2.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 UDMA33 controller> port 0xfc90-0xfc9f at device 2.1 on pci
0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0xfca0-0xfcbf irq 11 at de
vice 2.2 on pci0
usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
pci0: <bridge, PCI-unknown> at device 2.3 (no driver attached)
cbb0: <TI1251 PCI-CardBus Bridge> mem 0x10000000-0x10000fff irq 11 at device 3.0
on pci0
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
cbb1: <TI1251 PCI-CardBus Bridge> mem 0x20000000-0x20000fff irq 11 at device 3.1
on pci0
cardbus1: <CardBus bus> on cbb1
pccard1: <16-bit PCCard bus> on cbb1
pci0: <simple comms> at device 6.0 (no driver attached)
pci0: <multimedia, audio> at device 7.0 (no driver attached)
orm0: <Option ROM> at iomem 0xc0000-0xcbfff on isa0
pmtimer0 on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x64,0x60 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0
fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> at port 0x3f7,0x3f
0-0x3f5 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
ppc0: parallel port not found.
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 8250 or not responding
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
unknown: <PNP0303> can't assign resources (port)
unknown: <PNP0c02> can't assign resources (port)
unknown: <IBM3780> can't assign resources (irq)
ppc1: parallel port not found.
unknown: <PNP0700> can't assign resources (port)
Timecounters tick every 10.000 msec
xe0: <Xircom RealPort2 Ethernet 10/100 Adapter> at port 0x100-0x10f irq 11 funct
ion 0 config 1 on pccard1
xe0: Xircom CE3, bonding version 0x45, 100Mbps capable
xe0: DingoID = 0x444b, RevisionID = 0x1, VendorID = 0
xe0: Ethernet address 00:10:a4:c7:ff:41
ad0: 3102MB <IBM-DBCA-203240> [6304/16/63] at ata0-master UDMA33
acd0: CDROM <CRN-8241B> at ata1-master PIO4
Mounting root from ufs:/dev/ad0s1a
xe0: watchdog timeout; resetting card
Waiting (max 60 seconds) for system process `vnlru' to stop...stopped
Waiting (max 60 seconds) for system process `bufdaemon' to stop...stopped
Waiting (max 60 seconds) for system process `syncer' to stop...stopped
syncing disks, buffers remaining... 20 20 20 20 20 20 20 7 7
done
Uptime: 2h22m39s
Rebooting...
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.1-RELEASE #0: Thu Jun 5 02:55:42 GMT 2003
root@wv1u.btc.adaptec.com:/usr/obj/usr/src/sys/GENERIC
Preloaded elf kernel "/boot/kernel/kernel" at 0xc0689000.
Timecounter "i8254" frequency 1193182 Hz
Timecounter "TSC" frequency 298535817 Hz
CPU: Pentium II/Pentium II Xeon/Celeron (298.54-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x66a Stepping = 10
Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PA
T,PSE36,MMX,FXSR>
real memory = 100597760 (95 MB)
avail memory = 90644480 (86 MB)
Pentium Pro MTRR support enabled
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcibios: BIOS version 2.10
Using $PIR table, 8 entries at 0xc00fdf40
pcib0: <Intel 82443BX (440 BX) host to PCI bridge> at pcibus 0 on motherboard
pci0: <PCI bus> on pcib0
agp0: <Intel 82443BX (440 BX) host to PCI bridge> mem 0xf8000000-0xfbffffff at d
evice 0.0 on pci0
pcib1: <PCIBIOS PCI-PCI bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <display, VGA> at device 0.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 2.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 UDMA33 controller> port 0xfc90-0xfc9f at device 2.1 on pci
0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0xfca0-0xfcbf irq 11 at de
vice 2.2 on pci0
usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
pci0: <bridge, PCI-unknown> at device 2.3 (no driver attached)
cbb0: <TI1251 PCI-CardBus Bridge> mem 0x10000000-0x10000fff irq 11 at device 3.0
on pci0
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
cbb1: <TI1251 PCI-CardBus Bridge> mem 0x20000000-0x20000fff irq 11 at device 3.1
on pci0
cardbus1: <CardBus bus> on cbb1
pccard1: <16-bit PCCard bus> on cbb1
pci0: <simple comms> at device 6.0 (no driver attached)
pci0: <multimedia, audio> at device 7.0 (no driver attached)
orm0: <Option ROM> at iomem 0xc0000-0xcbfff on isa0
pmtimer0 on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x64,0x60 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0
fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> at port 0x3f7,0x3f
0-0x3f5 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
ppc0: parallel port not found.
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 8250 or not responding
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
unknown: <PNP0303> can't assign resources (port)
unknown: <PNP0c02> can't assign resources (port)
unknown: <IBM3780> can't assign resources (irq)
ppc1: parallel port not found.
unknown: <PNP0700> can't assign resources (port)
Timecounters tick every 10.000 msec
xe0: <Xircom RealPort2 Ethernet 10/100 Adapter> at port 0x100-0x10f irq 11 funct ion 0 config 1 on pccard1
xe0: Xircom CE3, bonding version 0x45, 100Mbps capable
xe0: DingoID = 0x444b, RevisionID = 0x1, VendorID = 0
xe0: Ethernet address 00:10:a4:c7:ff:41
ad0: 3102MB <IBM-DBCA-203240> [6304/16/63] at ata0-master UDMA33
acd0: CDROM <CRN-8241B> at ata1-master PIO4
Mounting root from ufs:/dev/ad0s1a
xe0: watchdog timeout; resetting card
SecondAdvent# SecondAdvent
--Boundary-00=_+ExVB0HYURhPuK+
Content-Type: text/plain;
charset="us-ascii";
name="kernelconfigfile"
Content-Transfer-Encoding: 7bit
Content-Disposition: attachment; filename="kernelconfigfile"
SecondAdvent# cat SECONDADVENT |less
#
# GENERIC -- Generic kernel configuration file for FreeBSD/i386
#
# For more information on this file, please read the handbook section on
# Kernel Configuration Files:
#
# http://www.FreeBSD.org/doc/en_US.ISO8859-1/books/handbook/kernelconfig-config.html
#
# The handbook is also available locally in /usr/share/doc/handbook
# if you've installed the doc distribution, otherwise always see the
# FreeBSD World Wide Web server (http://www.FreeBSD.org/) for the
# latest information.
#
# An exhaustive list of options and more detailed explanations of the
# device lines is also present in the ../../conf/NOTES and NOTES files.
# If you are in doubt as to the purpose or necessity of a line, check first
# in NOTES.
#
# $FreeBSD: src/sys/i386/conf/GENERIC,v 1.418 2004/09/19 00:52:22 mjacob Exp $
machine i386
cpu I686_CPU
ident secondadvent
# To statically compile in device wiring instead of /boot/device.hints
#hints "GENERIC.hints" # Default places to look for devices.
makeoptions DEBUG=-g # Build kernel with gdb(1) debug symbols
#options SCHED_ULE # ULE scheduler
options SCHED_4BSD # 4BSD scheduler
options PREEMPTION # Enable kernel thread preemption
options INET # InterNETworking
#options INET6 # IPv6 communications protocols
options FFS # Berkeley Fast Filesystem
options SOFTUPDATES # Enable FFS soft updates support
options UFS_ACL # Support for access control lists
options UFS_DIRHASH # Improve performance on big directories
options MD_ROOT # MD is a potential root device
#options NFSCLIENT # Network Filesystem Client
#options NFSSERVER # Network Filesystem Server
#options NFS_ROOT # NFS usable as /, requires NFSCLIENT
options MSDOSFS # MSDOS Filesystem
options CD9660 # ISO 9660 Filesystem
options PROCFS # Process filesystem (requires PSEUDOFS)
options PSEUDOFS # Pseudo-filesystem framework
options GEOM_GPT # GUID Partition Tables.
:
--Boundary-00=_+ExVB0HYURhPuK+--
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200409261458.06180.acarranza>