Skip site navigation (1)Skip section navigation (2)
Date:      Sat, 20 Sep 2003 04:55:57 +0400
From:      =?koi8-r?Q?=22?=Ayrton Senna=?koi8-r?Q?=22=20?= <as_freebsd@list.ru>
To:        =?koi8-r?Q?=22?=Soren Schmidt=?koi8-r?Q?=22=20?= <sos@spider.deepcore.dk>
Cc:        freebsd-current@FreeBSD.ORG
Subject:   Re[2]: ATA: UDMA66, 33 & ICRC
Message-ID:  <E1A0W2X-0003lf-00.as_freebsd-list-ru@f9.mail.ru>
In-Reply-To: <200309190601.h8J61MAr032257@spider.deepcore.dk>

next in thread | previous in thread | raw e-mail | index | archive | help
> > This became quite tricky, but the main (and the worst problem) was with ATAng.
> > I have Acer's motherboard and IBM's DTLA. Old driver were saying 'Non-ATA 66 cable or device' and perfectly worked in UDMA-33 mode. New driver didn't said a word, but when it tried to read something, everything was ending up with 'ICRC error'. I was already going to hack ata-chipsets to force UDMA-33, but I came upon hw.ata.ata_dma.
> I need more info to be able to tell what going on...
> A dmesg from a verbose booted system is mandatory here..

The problem is, I can't boot system with DMA, it wouldn't read anything with that error. System doesn't even mount root. There are boot log with ata_dma=0.

By the way, I had a chance today to put my HDD into another machine and boot it.DMA works perfectly, so as PIO does, but PIO is EXTREMELY slow. I had old Samsung once, I guess it worked in PIO, but it was not that slow. Something's strange out there.

boot log:
> Calibrating clock(s) ... i8254 clock: 1193240 Hz
> CLK_USE_I8254_CALIBRATION not specified - using default frequency
> Calibrating TSC clock ... TSC clock: 400912010 Hz
> Data TLB: 128 entries, 2-way associative
> Instruction TLB: 64 entries, 1-way associative
> L1 data cache: 32 kbytes, 32 bytes/line, 2 lines/tag, 2-way associative
> L1 instruction cache: 32 kbytes, 32 bytes/line, 2 lines/tag, 2-way associative
> Write Allocate Enable Limit: 192M bytes
> Write Allocate 15-16M bytes: Enable
> Physical memory chunk(s):
> 0x0000000000001000 - 0x000000000009ffff, 651264 bytes (159 pages)
> 0x0000000000564000 - 0x000000000bc69fff, 191913984 bytes (46854 pages)
> bios32: Found BIOS32 Service Directory header at 0xc00fadd0
> bios32: Entry = 0xfb250 (c00fb250)  Rev = 0  Len = 1
> pcibios: PCI BIOS entry at 0xf0000+0xb280
> pnpbios: Found PnP BIOS data at 0xc00fbf10
> pnpbios: Entry = f0000:bf38  Rev = 1.0
> Other BIOS signatures found:
> random: <entropy source>
> null: <null device, zero device>
> mem: <memory & I/O>
> pci_open(1):  mode 1 addr port (0x0cf8) is 0x80000058
> pci_open(1a): mode1res=0x80000000 (0x80000000)
> pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=154110b9)
> PCI-Only Interrupts: 10 11
> Location  Bus Device Pin  Link  IRQs
> slot 1      0   10    A   0x01  3 4 5 7 9 10 11 12 14 15
> slot 1      0   10    B   0x02  3 4 5 7 9 10 11 12 14 15
> slot 1      0   10    C   0x03  3 4 5 7 9 10 11 12 14 15
> slot 1      0   10    D   0x04  3 4 5 7 9 10 11 12 14 15
> slot 2      0   11    A   0x02  3 4 5 7 9 10 11 12 14 15
> slot 2      0   11    B   0x03  3 4 5 7 9 10 11 12 14 15
> slot 2      0   11    C   0x04  3 4 5 7 9 10 11 12 14 15
> slot 2      0   11    D   0x01  3 4 5 7 9 10 11 12 14 15
> slot 3      0   12    A   0x03  3 4 5 7 9 10 11 12 14 15
> slot 3      0   12    B   0x04  3 4 5 7 9 10 11 12 14 15
> slot 3      0   12    C   0x01  3 4 5 7 9 10 11 12 14 15
> slot 3      0   12    D   0x02  3 4 5 7 9 10 11 12 14 15
> embedded    0   15    A   0x05  3 4 5 7 9 10 11 12 14 15
> embedded    0   15    B   0x06  3 4 5 7 9 10 11 12 14 15
> embedded    0    1    A   0x01  3 4 5 7 9 10 11 12 14 15
> embedded    0    1    B   0x02  3 4 5 7 9 10 11 12 14 15
> embedded    0    1    C   0x03  3 4 5 7 9 10 11 12 14 15
> embedded    0    1    D   0x04  3 4 5 7 9 10 11 12 14 15
> embedded    0    2    A   0x59  3 4 5 7 9 10 11 12 14 15
> acpi_bus_number: root bus has no _BBN, assuming 0
> AcpiOsDerivePciId: bus 0 dev 7 func 0
> acpi_bus_number: root bus has no _BBN, assuming 0
> AcpiOsDerivePciId: bus 0 dev 7 func 0
> ACPI timer looks BAD  min = 0, max = 16777211, width = 16777211
> ACPI timer looks BAD  min = 1, max = 4, width = 3
> ACPI timer looks BAD  min = 1, max = 16777211, width = 16777210
> ACPI timer looks BAD  min = 0, max = 5, width = 5
> ACPI timer looks BAD  min = 1, max = 16777215, width = 16777214
> ACPI timer looks BAD  min = 1, max = 16777215, width = 16777214
> ACPI timer looks BAD  min = 1, max = 4, width = 3
> ACPI timer looks BAD  min = 1, max = 4, width = 3
> ACPI timer looks BAD  min = 1, max = 16777211, width = 16777210
> ACPI timer looks BAD  min = 1, max = 16777215, width = 16777214
> mss_probe: no address given, try 0x530
> mss_detect, busy still set (0xff)
> ---- initial configuration ------------------------
> \\_SB_.PCI0.ISA0.LNKA irq  11: [  1  3  4  5  6  7 10 11 12 14 15] low,level,sharable 0.10.0
> \\_SB_.PCI0.ISA0.LNKB irq   0: [  1  3  4  5  6  7 10 11 12 14 15] low,level,sharable 0.10.1
> \\_SB_.PCI0.ISA0.LNKC irq   0: [  1  3  4  5  6  7 10 11 12 14 15] low,level,sharable 0.10.2
> \\_SB_.PCI0.ISA0.LNKD irq   0: [  1  3  4  5  6  7 10 11 12 14 15] low,level,sharable 0.10.3
> \\_SB_.PCI0.ISA0.LNKB irq   0: [  1  3  4  5  6  7 10 11 12 14 15] low,level,sharable 0.11.0
> \\_SB_.PCI0.ISA0.LNKC irq   0: [  1  3  4  5  6  7 10 11 12 14 15] low,level,sharable 0.11.1
> \\_SB_.PCI0.ISA0.LNKD irq   0: [  1  3  4  5  6  7 10 11 12 14 15] low,level,sharable 0.11.2
> \\_SB_.PCI0.ISA0.LNKA irq  11: [  1  3  4  5  6  7 10 11 12 14 15] low,level,sharable 0.11.3
> \\_SB_.PCI0.ISA0.LNKC irq   0: [  1  3  4  5  6  7 10 11 12 14 15] low,level,sharable 0.12.0
> \\_SB_.PCI0.ISA0.LNKD irq   0: [  1  3  4  5  6  7 10 11 12 14 15] low,level,sharable 0.12.1
> \\_SB_.PCI0.ISA0.LNKA irq  11: [  1  3  4  5  6  7 10 11 12 14 15] low,level,sharable 0.12.2
> \\_SB_.PCI0.ISA0.LNKB irq   0: [  1  3  4  5  6  7 10 11 12 14 15] low,level,sharable 0.12.3
> \\_SB_.PCI0.ISA0.LNKE irq  10: [  1  3  4  5  6  7 10 11 12 14 15] low,level,sharable 0.2.0
> \\_SB_.PCI0.ISA0.LNKE irq  10: [  1  3  4  5  6  7 10 11 12 14 15] low,level,sharable 0.2.1
> \\_SB_.PCI0.ISA0.LNKE irq  10: [  1  3  4  5  6  7 10 11 12 14 15] low,level,sharable 0.2.2
> \\_SB_.PCI0.ISA0.LNKE irq  10: [  1  3  4  5  6  7 10 11 12 14 15] low,level,sharable 0.2.3
> \\_SB_.PCI0.ISA0.LNKA irq  11: [  1  3  4  5  6  7 10 11 12 14 15] low,level,sharable 0.1.0
> \\_SB_.PCI0.ISA0.LNKB irq   0: [  1  3  4  5  6  7 10 11 12 14 15] low,level,sharable 0.1.1
> \\_SB_.PCI0.ISA0.LNKC irq   0: [  1  3  4  5  6  7 10 11 12 14 15] low,level,sharable 0.1.2
> \\_SB_.PCI0.ISA0.LNKD irq   0: [  1  3  4  5  6  7 10 11 12 14 15] low,level,sharable 0.1.3
> ---- before setting priority for links ------------
> \\_SB_.PCI0.ISA0.LNKB:
>       interrupts:          1     3     4     5     6     7    10    11    12 14    15
>       penalty:        101320  2320  2320  1320  2320  2320  1720  1720  2320 11320 11320
>       references:     4
>       priority:       0
> \\_SB_.PCI0.ISA0.LNKC:
>       interrupts:          1     3     4     5     6     7    10    11    12 14    15
>       penalty:        101320  2320  2320  1320  2320  2320  1720  1720  2320 11320 11320
>       references:     4
>       priority:       0
> \\_SB_.PCI0.ISA0.LNKD:
>       interrupts:          1     3     4     5     6     7    10    11    12 14    15
>       penalty:        101320  2320  2320  1320  2320  2320  1720  1720  2320 11320 11320
>       references:     4
>       priority:       0
> ---- before fixup boot-disabled links -------------
> \\_SB_.PCI0.ISA0.LNKB:
>       interrupts:          1     3     4     5     6     7    10    11    12 14    15
>       penalty:        101320  2320  2320  1320  2320  2320  1720  1720  2320 11320 11320
>       references:     4
>       priority:       51025
> \\_SB_.PCI0.ISA0.LNKC:
>       interrupts:          1     3     4     5     6     7    10    11    12 14    15
>       penalty:        101320  2320  2320  1320  2320  2320  1720  1720  2320 11320 11320
>       references:     4
>       priority:       51025
> \\_SB_.PCI0.ISA0.LNKD:
>       interrupts:          1     3     4     5     6     7    10    11    12 14    15
>       penalty:        101320  2320  2320  1320  2320  2320  1720  1720  2320 11320 11320
>       references:     4
>       priority:       51025
> ---- after fixup boot-disabled links --------------
> ---- arbitrated configuration ---------------------
> \\_SB_.PCI0.ISA0.LNKA irq  11: [  1  3  4  5  6  7 10 11 12 14 15] low,level,sharable 0.10.0
> \\_SB_.PCI0.ISA0.LNKB irq   5: [  1  3  4  5  6  7 10 11 12 14 15] low,level,sharable 0.10.1
> \\_SB_.PCI0.ISA0.LNKC irq  11: [  1  3  4  5  6  7 10 11 12 14 15] low,level,sharable 0.10.2
> \\_SB_.PCI0.ISA0.LNKD irq  10: [  1  3  4  5  6  7 10 11 12 14 15] low,level,sharable 0.10.3
> \\_SB_.PCI0.ISA0.LNKB irq   5: [  1  3  4  5  6  7 10 11 12 14 15] low,level,sharable 0.11.0
> \\_SB_.PCI0.ISA0.LNKC irq  11: [  1  3  4  5  6  7 10 11 12 14 15] low,level,sharable 0.11.1
> \\_SB_.PCI0.ISA0.LNKD irq  10: [  1  3  4  5  6  7 10 11 12 14 15] low,level,sharable 0.11.2
> \\_SB_.PCI0.ISA0.LNKA irq  11: [  1  3  4  5  6  7 10 11 12 14 15] low,level,sharable 0.11.3
> \\_SB_.PCI0.ISA0.LNKC irq  11: [  1  3  4  5  6  7 10 11 12 14 15] low,level,sharable 0.12.0
> \\_SB_.PCI0.ISA0.LNKD irq  10: [  1  3  4  5  6  7 10 11 12 14 15] low,level,sharable 0.12.1
> \\_SB_.PCI0.ISA0.LNKA irq  11: [  1  3  4  5  6  7 10 11 12 14 15] low,level,sharable 0.12.2
> \\_SB_.PCI0.ISA0.LNKB irq   5: [  1  3  4  5  6  7 10 11 12 14 15] low,level,sharable 0.12.3
> \\_SB_.PCI0.ISA0.LNKE irq  10: [  1  3  4  5  6  7 10 11 12 14 15] low,level,sharable 0.2.0
> \\_SB_.PCI0.ISA0.LNKE irq  10: [  1  3  4  5  6  7 10 11 12 14 15] low,level,sharable 0.2.1
> \\_SB_.PCI0.ISA0.LNKE irq  10: [  1  3  4  5  6  7 10 11 12 14 15] low,level,sharable 0.2.2
> \\_SB_.PCI0.ISA0.LNKE irq  10: [  1  3  4  5  6  7 10 11 12 14 15] low,level,sharable 0.2.3
> \\_SB_.PCI0.ISA0.LNKA irq  11: [  1  3  4  5  6  7 10 11 12 14 15] low,level,sharable 0.1.0
> \\_SB_.PCI0.ISA0.LNKB irq   5: [  1  3  4  5  6  7 10 11 12 14 15] low,level,sharable 0.1.1
> \\_SB_.PCI0.ISA0.LNKC irq  11: [  1  3  4  5  6  7 10 11 12 14 15] low,level,sharable 0.1.2
> \\_SB_.PCI0.ISA0.LNKD irq  10: [  1  3  4  5  6  7 10 11 12 14 15] low,level,sharable 0.1.3
> pci0: physical bus=0
>       map[10]: type 1, range 32, base d0000000, size 26, enabled
> found->       vendor=0x10b9, dev=0x1541, revid=0x04
>       bus=0, slot=0, func=0
>       class=06-00-00, hdrtype=0x00, mfdev=0
>       cmdreg=0x0006, statreg=0x2410, cachelnsz=0 (dwords)
>       lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
> found->       vendor=0x10b9, dev=0x5243, revid=0x04
>       bus=0, slot=1, func=0
>       class=06-04-00, hdrtype=0x01, mfdev=0
>       cmdreg=0x0107, statreg=0x0400, cachelnsz=0 (dwords)
>       lattimer=0x20 (960 ns), mingnt=0x0e (3500 ns), maxlat=0x00 (0 ns)
>       map[10]: type 1, range 32, base d8000000, size 12, enabled
> pcib0: matched entry for 0.2.INTA (source \\_SB_.PCI0.ISA0.LNKE)
> found->       vendor=0x10b9, dev=0x5237, revid=0x03
>       bus=0, slot=2, func=0
>       class=0c-03-10, hdrtype=0x00, mfdev=0
>       cmdreg=0x0007, statreg=0x0290, cachelnsz=8 (dwords)
>       lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x50 (20000 ns)
>       intpin=a, irq=10
>       powerspec 2  supports D0 D3  current D0
> found->       vendor=0x10b9, dev=0x1533, revid=0xc3
>       bus=0, slot=7, func=0
>       class=06-01-00, hdrtype=0x00, mfdev=0
>       cmdreg=0x000f, statreg=0x0210, cachelnsz=0 (dwords)
>       lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>       powerspec 2  supports D0 D3  current D0
>       map[20]: type 4, range 32, base 0000f000, size  4, enabled
> found->       vendor=0x10b9, dev=0x5229, revid=0xc2
>       bus=0, slot=15, func=0
>       class=01-01-fa, hdrtype=0x00, mfdev=0
>       cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords)
>       lattimer=0x20 (960 ns), mingnt=0x02 (500 ns), maxlat=0x04 (1000 ns)
>       intpin=a, irq=255
>       powerspec 2  supports D0 D3  current D0
> agp0: allocating GATT for aperture of size 64M
> pcib1:   secondary bus     1
> pcib1:   subordinate bus   1
> pcib1:   I/O decode        0xf000-0xfff
> pcib1:   memory decode     0xd4000000-0xd5ffffff
> pcib1:   prefetched decode 0xd6000000-0xd7ffffff
> pci1: physical bus=1
>       map[10]: type 1, range 32, base d4000000, size 24, enabled
>       map[14]: type 3, range 32, base d6000000, size 25, enabled
> pcib0: matched entry for 0.1.INTA (source \\_SB_.PCI0.ISA0.LNKA)
> found->       vendor=0x10de, dev=0x002c, revid=0x15
>       bus=1, slot=0, func=0
>       class=03-00-00, hdrtype=0x00, mfdev=0
>       cmdreg=0x0007, statreg=0x02b0, cachelnsz=0 (dwords)
>       lattimer=0x20 (960 ns), mingnt=0x05 (1250 ns), maxlat=0x01 (250 ns)
>       intpin=a, irq=11
>       powerspec 1  supports D0 D3  current D0
> ata0: reset tp1 mask=03 ostat0=50 ostat1=00
> ata0-master: stat=0x80 err=0x80 lsb=0x80 msb=0x80
> ata0-slave:  stat=0x00 err=0xeb lsb=0x00 msb=0x00
> ata0-master: stat=0x50 err=0x01 lsb=0x00 msb=0x00
> ata0: reset tp2 mask=03 stat0=50 stat1=00 devices=0x1<ATA_MASTER>
> ata1: reset tp1 mask=03 ostat0=50 ostat1=50
> ata1-master: stat=0x80 err=0x80 lsb=0x80 msb=0x80
> ata1-slave:  stat=0x80 err=0x80 lsb=0x80 msb=0x80
> ata1-master: stat=0x00 err=0x01 lsb=0x14 msb=0xeb
> ata1-slave:  stat=0x00 err=0x01 lsb=0x14 msb=0xeb
> ata1: reset tp2 mask=03 stat0=00 stat1=00 devices=0xc<ATAPI_SLAVE,ATAPI_MASTER
>
> mss_probe: no address given, try 0x530
> mss_detect, busy still set (0xff)
> mss_probe: no address given, try 0x530
> mss_detect, busy still set (0xff)
> mss_probe: no address given, try 0x530
> mss_detect, busy still set (0xff)
> mss_probe: no address given, try 0x530
> mss_detect, busy still set (0xff)
> mss_probe: no address given, try 0x530
> mss_detect, busy still set (0xff)
> sio0: irq maps: 0x1 0x11 0x1 0x1
> unknown: not probed (disabled)
> unknown: not probed (disabled)
> unknown: not probed (disabled)
> unknown: not probed (disabled)
> ppc0: using extended I/O port range
> ppc0: ECP SPP ECP+EPP SPP
> lp0: bpf attached
> unknown: not probed (disabled)
> atkbd: the current kbd controller command byte 0067
> atkbd: keyboard ID 0x41ab (2)
> kbd0: atkbd0, AT 101/102 (2), config:0x1, flags:0x3d0000
> psm0: unable to allocate IRQ
> mss_detect, busy still set (0xff)
> mss_detect, busy still set (0xff)
> mss_detect, busy still set (0xff)
> mss_detect, busy still set (0xff)
> mss_detect, busy still set (0xff)
> unknown: not probed (disabled)
> unknown: not probed (disabled)
> unknown: not probed (disabled)
> unknown: not probed (disabled)
> unknown: not probed (disabled)
> ata: ata0 already exists; skipping it
> ata: ata1 already exists; skipping it
> atkbdc: atkbdc0 already exists; skipping it
> fdc: fdc0 already exists; skipping it
> ppc: ppc0 already exists; skipping it
> sio: sio0 already exists; skipping it
> Trying Read_Port at 203
> CTL0043: start dependent (0)
> CTL0043: adding irq mask 0x20
> CTL0043: adding dma mask 0x2
> CTL0043: adding dma mask 0x8
> CTL0043: adding io range 0x220-0x22f, size=0x10, align=0x1
> CTL0043: adding io range 0x330-0x331, size=0x2, align=0x1
> CTL0043: adding io range 0x388-0x38b, size=0x4, align=0x1
> CTL0043: start dependent (1)
> CTL0043: adding irq mask 0x6a0
> CTL0043: adding dma mask 0xb
> CTL0043: adding dma mask 0xb
> CTL0043: adding io range 0x220-0x28f, size=0x10, align=0x20
> CTL0043: adding io range 0x300-0x331, size=0x2, align=0x30
> CTL0043: adding io range 0x388-0x38b, size=0x4, align=0x1
> CTL0043: start dependent (1)
> CTL0043: adding irq mask 0x6a0
> CTL0043: adding dma mask 0xb
> CTL0043: adding dma mask 0xb
> CTL0043: adding io range 0x220-0x28f, size=0x10, align=0x20
> CTL0043: adding io range 0x300-0x331, size=0x2, align=0x30
> CTL0043: start dependent (1)
> CTL0043: adding irq mask 0x6a0
> CTL0043: adding dma mask 0xb
> CTL0043: adding dma mask 0xb
> CTL0043: adding io range 0x220-0x28f, size=0x10, align=0x20
> CTL0043: start dependent (2)
> CTL0043: adding irq mask 0x6a0
> CTL0043: adding dma mask 0xb
> CTL0043: adding io range 0x220-0x28f, size=0x10, align=0x20
> CTL0043: adding io range 0x300-0x331, size=0x2, align=0x10
> CTL0043: adding io range 0x388-0x397, size=0x4, align=0x4
> CTL0043: start dependent (2)
> CTL0043: adding irq mask 0x6a0
> CTL0043: adding dma mask 0xb
> CTL0043: adding io range 0x220-0x28f, size=0x10, align=0x20
> CTL0043: end dependent
> CTL7005: start dependent (0)
> CTL7005: adding io range 0x201-0x201, size=0x1, align=0x1
> CTL7005: start dependent (1)
> CTL7005: adding io range 0x200-0x20f, size=0x1, align=0x1
> CTL7005: end dependent
> sc: sc0 already exists; skipping it
> vga: vga0 already exists; skipping it
> isa_probe_children: disabling PnP devices
> isa_probe_children: probing non-PnP devices
> adv0: not probed (disabled)
> aha0: not probed (disabled)
> aic0: not probed (disabled)
> bt0: not probed (disabled)
> cs0: not probed (disabled)
> ed0: not probed (disabled)
> fe0: not probed (disabled)
> ie0: not probed (disabled)
> le0: not probed (disabled)
> lnc0: not probed (disabled)
> pcic0 failed to probe at port 0x3e0 iomem 0xd0000 on isa0
> pcic1: not probed (disabled)
> sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
> sio1: irq maps: 0x1 0x9 0x1 0x1
> sio2: not probed (disabled)
> sio3: not probed (disabled)
> sn0: not probed (disabled)
> fb0: vga0, vga, type:VGA (5), flags:0x7007f
> fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000
> fb0: init mode:24, bios mode:3, current mode:24
> fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k
> VGA parameters upon power-up
> 50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 54 80
> bf 1f 00 4f 0e 0f 00 00 07 80 9c 8e 8f 28 1f 96
> b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
> 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
> VGA parameters in BIOS for mode 24
> 50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 54 80
> bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
> b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
> 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
> EGA/VGA parameters to be used for mode 24
> 50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 54 80
> bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
> b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
> 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
> vt0: not probed (disabled)
> isa_probe_children: probing PnP devices
> sbc0: setting card to irq 5, drq 0, 1
> pcm0: sndbuf_setmap 6f5000, 1000; 0xcf8a1000 -> 6f5000
> pcm0: sndbuf_setmap 6f6000, 1000; 0xcf8a2000 -> 6f6000
> unknown: <Game> failed to probe at port 0x201 on isa0
> Device configuration finished.
> procfs registered
> Timecounter "TSC" frequency 400912010 Hz quality 800
> splash: image decoder found: fire_saver
> lo0: bpf attached
> acpi_cpu0: set speed to 100.0%
> ata0-master: pio=0x0c wdma=0x22 udma=0x45 cable=40pin
> ad0: setting PIO4 on AcerLabs Aladdin chip
> ad0: <IBM-DTLA-305030/TW3OA60A> ATA-5 disk at ata0-master
> ad0: 29314MB (60036480 sectors), 59560 C, 16 H, 63 S, 512 B
> ad0: 16 secs/int, 1 depth queue, PIO4
> GEOM: new disk ad0
> ar: FreeBSD check1 failed
> ata1-slave: pio=0x0c wdma=0x22 udma=0xffffffff cable=40pin
> ata1-master: pio=0x0b wdma=0x21 udma=0xffffffff cable=40pin
> acd0: setting PIO3 on AcerLabs Aladdin chip
> acd0: <MATSHITA CR-585/ZS18> CDROM drive at ata1 as master
> acd0: read 4125KB/s (4125KB/s), 128KB buffer, PIO3
> acd0: Reads: CDR, CDRW, CDDA stream
> acd0: Writes:
> acd0: Audio: play, 256 volume levels
> acd0: Mechanism: ejectable tray, unlocked
> acd0: Medium: CD-ROM 120mm data disc
> [0] f:00 typ:6 s(CHS):0/1/1 e(CHS):1018/254/63 s:63 l:16370172
> [1] f:00 typ:44 s(CHS):1019/0/1 e(CHS):1023/254/63 s:16370235 l:192780
> [2] f:80 typ:165 s(CHS):1023/255/63 e(CHS):1023/254/63 s:16563015 l:43471890
> [3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
> GEOM: Configure ad0s1, start 32256 length 8381528064 end 8381560319
> GEOM: Configure ad0s2, start 8381560320 length 98703360 end 8480263679
> GEOM: Configure ad0s3, start 8480263680 length 22257607680 end 30737871359
> acd1: setting PIO4 on AcerLabs Aladdin chip
> acd1: <CD-W54E/1.1B> CDRW drive at ata1 as slave
> acd1: read 5512KB/s (5512KB/s) write 689KB/s (689KB/s), 1280KB buffer, PIO4
> acd1: Reads: CDR, CDRW, CDDA stream, packet
> acd1: Writes: CDR, CDRW, test write
> acd1: Audio: play, 256 volume levels
> acd1: Mechanism: ejectable tray, unlocked
> acd1: Medium: CD-R 120mm data disc
> GEOM: Configure ad0s3a, start 0 length 134217728 end 134217727
> GEOM: Configure ad0s3b, start 134217728 length 386826240 end 521043967
> GEOM: Configure ad0s3c, start 0 length 22257607680 end 22257607679
> GEOM: Configure ad0s3e, start 521043968 length 268435456 end 789479423
> GEOM: Configure ad0s3f, start 789479424 length 268435456 end 1057914879
> GEOM: Configure ad0s3g, start 1057914880 length 21199692800 end 22257607679
> WARNING: / was not properly dismounted
> start_init: trying /sbin/init
> tun0: bpf attached



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?E1A0W2X-0003lf-00.as_freebsd-list-ru>