Date: Sun, 30 Sep 2001 20:22:10 -0700 (PDT) From: Lester Igo <igo@vtic.net> To: <freebsd-stable@FreeBSD.org> Subject: Stable not so Stable? Message-ID: <Pine.BSF.4.33.0109301949310.803-100000@confusion>
next in thread | raw e-mail | index | archive | help
I am having crashing problems with FreeBSD-stable. I compiled stable last weekend, and had a few different problems: 1. The drivers for my ethernet (Intel EtherExpressPro100) cards unloaded itself on Sept 26th. Error messages follow: Sep 26 13:52:35 confusion /kernel: FreeBSD 4.4-STABLE #7: Sun Sep 23 13:10:55 PDT 2001 ... Sep 26 11:33:10 confusion /kernel: fxp0: device timeout Sep 26 11:33:49 confusion /kernel: fxp0: device timeout Sep 26 11:34:08 confusion ntpd[30467]: sendto(216.152.68.20): No route to host Sep 26 11:34:18 confusion natd[128]: failed to write packet back (No route to host) Sep 26 11:34:25 confusion /kernel: fxp0: device timeout .... 2. Then I had to reboot on Sat Sept 29th because "some buffers" were not emptying correctly. The symptom would basically be that the last litle bit of output would not show up until more data was transfered, (for example prompts would not show up until I started typing the next command, "screen"s would finish drawing 3/4 of the way through the screen, etc) So, I decided to udpate -stable again and get 1 week newer to see if the problems were fixed... Since then, I haven't been able to get more than about 6 hours of uptime between crashes... I have had a mixture of "hard hangs" (have to kill power to reboot), and reboots with no error messages. Any ideas on the problems I have been seeing? Are there known issues, if so any timelines to have them fixed in? I am going to be remote this week, so I am supping back to 4.4 release (I was at 4.4 RC before this and all was happy) to help keep things stable while I am not close by to reboot. What is my system? GigaByte GA-586DX w/Dual P166MMX cpus and Adaptec aic7880 on board. Two Intel PCI EtherExpressPro (fxp) cards. Note: yes it is time to upgrade, how is FreeBSD's support for the Dual Athalon configs? What does it do? Firewall/gateway system. Natd, squid, Apache, etc. I have included below the messages from bootup: Sep 29 19:21:10 confusion /kernel: Copyright (c) 1992-2001 The FreeBSD Project. Sep 29 19:21:10 confusion /kernel: Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 Sep 29 19:21:10 confusion /kernel: The Regents of the University of California. All rights reserved. Sep 29 19:21:10 confusion /kernel: FreeBSD 4.4-STABLE #7: Sun Sep 23 13:10:55 PDT 2001 Sep 29 19:21:10 confusion /kernel: root@confusion:/usr/src/sys/compile/CONFUSION Sep 29 19:21:10 confusion /kernel: Timecounter "i8254" frequency 1193182 Hz Sep 29 19:21:10 confusion /kernel: CPU: Pentium/P55C (167.05-MHz 586-class CPU) Sep 29 19:21:10 confusion /kernel: Origin = "GenuineIntel" Id = 0x544 Stepping = 4 Sep 29 19:21:10 confusion /kernel: Features=0x8003bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,APIC,MMX> Sep 29 19:21:10 confusion /kernel: real memory = 134217728 (131072K bytes) Sep 29 19:21:10 confusion /kernel: avail memory = 127258624 (124276K bytes) Sep 29 19:21:10 confusion /kernel: Programming 24 pins in IOAPIC #0 Sep 29 19:21:10 confusion /kernel: IOAPIC #0 intpin 2 -> irq 0 Sep 29 19:21:10 confusion /kernel: FreeBSD/SMP: Multiprocessor motherboard Sep 29 19:21:10 confusion /kernel: cpu0 (BSP): apic id: 0, version: 0x00030010, at 0xfee00000 Sep 29 19:21:10 confusion /kernel: cpu1 (AP): apic id: 1, version: 0x00030010, at 0xfee00000 Sep 29 19:21:10 confusion /kernel: io0 (APIC): apic id: 2, version: 0x00170011, at 0xfec00000 Sep 29 19:21:10 confusion /kernel: Preloaded elf kernel "kernel" at 0xc0351000. Sep 29 19:21:10 confusion /kernel: Preloaded userconfig_script "/boot/kernel.conf" at 0xc035109c. Sep 29 19:21:10 confusion /kernel: Intel Pentium detected, installing workaround for F00F bug Sep 29 19:21:10 confusion /kernel: npx0: <math processor> on motherboard Sep 29 19:21:10 confusion /kernel: npx0: INT 16 interface Sep 29 19:21:10 confusion /kernel: pcib0: <Host to PCI bridge> on motherboard Sep 29 19:21:10 confusion /kernel: IOAPIC #0 intpin 17 -> irq 2 Sep 29 19:21:10 confusion /kernel: IOAPIC #0 intpin 18 -> irq 16 Sep 29 19:21:10 confusion /kernel: IOAPIC #0 intpin 19 -> irq 17 Sep 29 19:21:10 confusion /kernel: pci0: <PCI bus> on pcib0 Sep 29 19:21:10 confusion /kernel: isab0: <Intel 82371SB PCI to ISA bridge> at device 7.0 on pci0 Sep 29 19:21:11 confusion /kernel: isa0: <ISA bus> on isab0 Sep 29 19:21:11 confusion /kernel: atapci0: <Intel PIIX3 ATA controller> port 0xf000-0xf00f at device 7.1 on pci0 Sep 29 19:21:11 confusion /kernel: ata0: at 0x1f0 irq 14 on atapci0 Sep 29 19:21:11 confusion /kernel: ata1: at 0x170 irq 15 on atapci0 Sep 29 19:21:11 confusion /kernel: fxp0: <Intel Pro 10/100B/100+ Ethernet> port 0x6400-0x641f mem 0xe0000000-0xe00fffff,0xe0201000-0xe0201fff irq 2 at device 9.0 on pci0 Sep 29 19:21:11 confusion /kernel: fxp0: Ethernet address 00:a0:c9:6e:1e:f1 Sep 29 19:21:11 confusion /kernel: inphy0: <i82555 10/100 media interface> on miibus0 Sep 29 19:21:11 confusion /kernel: inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto Sep 29 19:21:11 confusion /kernel: fxp1: <Intel Pro 10/100B/100+ Ethernet> port 0x6500-0x651f mem 0xe0100000-0xe01fffff,0xe0200000-0xe0200fff irq 16 at device 10.0 on pci0 Sep 29 19:21:11 confusion /kernel: fxp1: Ethernet address 00:a0:c9:1e:08:51 Sep 29 19:21:11 confusion /kernel: nsphy0: <DP83840 10/100 media interface> on miibus1 Sep 29 19:21:11 confusion /kernel: nsphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto Sep 29 19:21:11 confusion /kernel: ahc0: <Adaptec aic7880 Ultra SCSI adapter> port 0x6000-0x60ff mem 0xe0202000-0xe0202fff irq 17 at device 12.0 on pci0 Sep 29 19:21:11 confusion /kernel: aic7880: Ultra Wide Channel A, SCSI Id=7, 16/255 SCBs Sep 29 19:21:11 confusion /kernel: orm0: <Option ROMs> at iomem 0xc0000-0xc5fff,0xc8000-0xcb7ff on isa0 Sep 29 19:21:11 confusion /kernel: fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 Sep 29 19:21:11 confusion /kernel: fdc0: FIFO enabled, 8 bytes threshold Sep 29 19:21:11 confusion /kernel: fd0: <1440-KB 3.5" drive> on fdc0 drive 0 Sep 29 19:21:11 confusion /kernel: atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 Sep 29 19:21:11 confusion /kernel: atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 Sep 29 19:21:11 confusion /kernel: kbd0 at atkbd0 Sep 29 19:21:11 confusion /kernel: vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 Sep 29 19:21:11 confusion /kernel: sc0: <System console> at flags 0x100 on isa0 Sep 29 19:21:11 confusion /kernel: sc0: VGA <16 virtual consoles, flags=0x300> Sep 29 19:21:11 confusion /kernel: sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 Sep 29 19:21:11 confusion /kernel: sio0: type 16550A Sep 29 19:21:11 confusion /kernel: sio1: configured irq 3 not in bitmap of probed irqs 0 Sep 29 19:21:11 confusion /kernel: ppc0: parallel port not found. Sep 29 19:21:11 confusion /kernel: APIC_IO: Testing 8254 interrupt delivery Sep 29 19:21:11 confusion /kernel: APIC_IO: routing 8254 via IOAPIC #0 intpin 2 Sep 29 19:21:11 confusion /kernel: IP packet filtering initialized, divert enabled, rule-based forwarding enabled, default to accept, logging limited to 10 packets/entry by default Sep 29 19:21:11 confusion /kernel: IPv6 packet filtering initialized, default to accept, logging limited to 10 packets/entry Sep 29 19:21:11 confusion /kernel: SMP: AP CPU #1 Launched! Sep 29 19:21:11 confusion /kernel: ad0: 3346MB <Maxtor 83500 A8> [6800/16/63] at ata0-master WDMA2 Sep 29 19:21:11 confusion /kernel: Waiting 5 seconds for SCSI devices to settle Sep 29 19:21:11 confusion /kernel: da0 at ahc0 bus 0 target 2 lun 0 Sep 29 19:21:11 confusion /kernel: da0: <FUJITSU MAG3091L SUN9.0G 1111> Fixed Direct Access SCSI-2 device Sep 29 19:21:11 confusion /kernel: da0: 10.000MB/s transfers (10.000MHz, offset 15), Tagged Queueing Enabled Sep 29 19:21:12 confusion /kernel: da0: 8637MB (17689267 512 byte sectors: 255H 63S/T 1101C) Sep 29 19:21:12 confusion /kernel: da1 at ahc0 bus 0 target 3 lun 0 Sep 29 19:21:12 confusion /kernel: da1: <FUJITSU MAG3091L SUN9.0G 1111> Fixed Direct Access SCSI-2 device Sep 29 19:21:12 confusion /kernel: da1: 10.000MB/s transfers (10.000MHz, offset 15), Tagged Queueing Enabled Sep 29 19:21:12 confusion /kernel: da1: 8637MB (17689267 512 byte sectors: 255H 63S/T 1101C) Sep 29 19:21:12 confusion /kernel: da2 at ahc0 bus 0 target 4 lun 0 Sep 29 19:21:12 confusion /kernel: da2: <FUJITSU MAG3091L SUN9.0G 1111> Fixed Direct Access SCSI-2 device Sep 29 19:21:12 confusion /kernel: da2: 10.000MB/s transfers (10.000MHz, offset 15), Tagged Queueing Enabled Sep 29 19:21:12 confusion /kernel: da2: 8637MB (17689267 512 byte sectors: 255H 63S/T 1101C) Sep 29 19:21:12 confusion /kernel: da3 at ahc0 bus 0 target 5 lun 0 Sep 29 19:21:12 confusion /kernel: da3: <FUJITSU MAG3091L SUN9.0G 1111> Fixed Direct Access SCSI-2 device Sep 29 19:21:12 confusion /kernel: da3: 10.000MB/s transfers (10.000MHz, offset 15), Tagged Queueing Enabled Sep 29 19:21:12 confusion /kernel: da3: 8637MB (17689267 512 byte sectors: 255H 63S/T 1101C) -- Lester Igo igo@vtic.net http://www.vtic.net/~igo To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-stable" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.BSF.4.33.0109301949310.803-100000>