Date: Wed, 10 Apr 2002 08:20:33 -0500 From: Mithril <mithril@fastem.com> To: freebsd-questions@freebsd.org Subject: Cant get ALi M5451 Sound Card to work Message-ID: <20020410082033.0b1121fe.mithril@fastem.com>
next in thread | raw e-mail | index | archive | help
Hi Everyone,
I have a Soyo K7ADA motherboard with integrated ALi M5451 sound card. It was working fine under Linux using the trident driver, but I recently switched to using FreeBSD as my primary OS. I am running 4.5 and understand that the snd_t4dwave.ko is the correct module for my card. When I load that module however, I get errors :
(excerpt from dmesg)
----------
pcm0: <Acer Labs M5451> port 0xd000-0xd0ff mem 0xdd000000-0xdd000fff irq 5 at device 3.0 on pci0
pcm0: ac97 codec invalid or not present (id == 0)
device_probe_and_attach: pcm0 attach returned 6
----------
I have run pciconf and even inspected the code of t4dwave.c (I am no pro C programmer, though). I do not know where to go from here. Please help!
Thanks so much,
Mithril
su-2.05a# pciconf -lv
chip0@pci0:0:0: class=0x060000 card=0x00000000 chip=0x164710b9 rev=0x02 hdr=0x00
vendor = 'Acer Labs Incorporated (ALi)'
device = 'ALI M1647 ALiMAGiK 1 AGP System Controller'
class = bridge
subclass = HOST-PCI
pcib1@pci0:1:0: class=0x060400 card=0x00000000 chip=0x524710b9 rev=0x00 hdr=0x01
vendor = 'Acer Labs Incorporated (ALi)'
device = 'ALI M1621 PCI to AGP Bridge'
class = bridge
subclass = PCI-PCI
ohci0@pci0:2:0: class=0x0c0310 card=0x523710b9 chip=0x523710b9 rev=0x03 hdr=0x00
vendor = 'Acer Labs Incorporated (ALi)'
device = 'ALI M5237 USB Host Controller'
class = serial bus
subclass = USB
none0@pci0:3:0: class=0x040100 card=0x545110b9 chip=0x545110b9 rev=0x02 hdr=0x00
vendor = 'Acer Labs Incorporated (ALi)'
device = 'ALI M5451 PCI AC-Link Controller Audio Device'
class = multimedia
subclass = audio
atapci0@pci0:4:0: class=0x01018a card=0x522910b9 chip=0x522910b9 rev=0xc4 hdr=0x00
vendor = 'Acer Labs Incorporated (ALi)'
device = 'M1543 Southbridge EIDE Controller'
class = mass storage
subclass = ATA
ohci1@pci0:6:0: class=0x0c0310 card=0x523710b9 chip=0x523710b9 rev=0x03 hdr=0x00
vendor = 'Acer Labs Incorporated (ALi)'
device = 'ALI M5237 USB Host Controller'
class = serial bus
subclass = USB
isab0@pci0:7:0: class=0x060100 card=0x153310b9 chip=0x153310b9 rev=0x00 hdr=0x00
vendor = 'Acer Labs Incorporated (ALi)'
device = 'ALI M1533 Aladdin IV ISA Bridge'
class = bridge
subclass = PCI-ISA
dc0@pci0:12:0: class=0x020000 card=0xc00111ad chip=0xc11511ad rev=0x25 hdr=0x00
vendor = 'Lite-On Communications Inc'
device = 'LC82C115 PNIC II 10/100 PCI MAC/PHY'
class = network
subclass = ethernet
xl0@pci0:13:0: class=0x020000 card=0x905510b7 chip=0x905510b7 rev=0x30 hdr=0x00
vendor = '3COM Corp, Networking Division'
device = '3C905B-TX Fast Etherlink 10/100 PCI TX NIC'
class = network
subclass = ethernet
chip1@pci0:17:0: class=0x068000 card=0x710110b9 chip=0x710110b9 rev=0x00 hdr=0x00
vendor = 'Acer Labs Incorporated (ALi)'
device = 'ALI M7101 Power Management Controller'
class = bridge
subclass = PCI-unknown
none1@pci1:0:0: class=0x030000 card=0xff03102b chip=0x0521102b rev=0x03 hdr=0x00
vendor = 'Matrox Graphics Inc'
device = 'MGA-G200 Millennium/Mystique G200 AGP'
class = display
subclass = VGA
FULL DMESG:
su-2.05a# dmesg
Copyright (c) 1992-2002 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.5-RELEASE #6: Sun Apr 7 00:19:23 CST 2002
root@gandalf.lotr:/usr/src/sys/compile/GANDALF
Timecounter "i8254" frequency 1193182 Hz
Timecounter "TSC" frequency 659941113 Hz
CPU: AMD Duron(tm) processor (659.94-MHz 686-class CPU)
Origin = "AuthenticAMD" Id = 0x630 Stepping = 0
Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR>
AMD Features=0xc0440000<<b18>,AMIE,DSP,3DNow!>
real memory = 268369920 (262080K bytes)
avail memory = 257056768 (251032K bytes)
Preloaded elf kernel "kernel" at 0xc0402000.
Preloaded elf module "splash_bmp.ko" at 0xc040209c.
Preloaded splash_image_data "/boot/freebsd256.bmp" at 0xc0402140.
VESA: v2.0, 8192k memory, flags:0x1, mode table:0xc02df882 (1000022)
VESA: Matrox Graphics Inc.
Pentium Pro MTRR support enabled
md0: Malloc disk
Using $PIR table, 8 entries at 0xc00fdef0
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
pcib1: <AcerLabs M5247 PCI-PCI(AGP Supported) bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <Matrox MGA G200 AGP graphics accelerator> at 0.0 irq 10
ohci0: <AcerLabs M5237 (Aladdin-V) USB controller> mem 0xdd004000-0xdd004fff irq 11 at device 2.0 on pci0
usb0: OHCI version 1.0, legacy support
usb0: <AcerLabs M5237 (Aladdin-V) USB controller> on ohci0
usb0: USB revision 1.0
uhub0: AcerLabs OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 4 ports with 4 removable, self powered
ums0: Microsoft Microsoft Wheel Mouse Optical\M-., rev 1.10/1.21, addr 2, iclass 3/1
ums0: 3 buttons and Z dir.
pci0: <unknown card> (vendor=0x10b9, dev=0x5451) at 3.0 irq 5
atapci0: <AcerLabs Aladdin ATA100 controller> port 0xd400-0xd40f at device 4.0 on
pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
ohci1: <AcerLabs M5237 (Aladdin-V) USB controller> mem 0xdd001000-0xdd001fff irq 11 at device 6.0 on pci0
usb1: OHCI version 1.0, legacy support
usb1: <AcerLabs M5237 (Aladdin-V) USB controller> on ohci1
usb1: USB revision 1.0
uhub1: AcerLabs OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 4 ports with 4 removable, self powered
isab0: <AcerLabs M1533 portable PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
dc0: <LC82C115 PNIC II 10/100BaseTX> port 0xdc00-0xdcff mem 0xdd003000-0xdd0030ff
irq 10 at device 12.0 on pci0
dc0: Ethernet address: 00:a0:cc:e2:a7:73
miibus0: <MII bus> on dc0
dcphy0: <Intel 21143 NWAY media interface> on miibus0
dcphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
xl0: <3Com 3c905B-TX Fast Etherlink XL> port 0xe000-0xe07f mem 0xdd005000-0xdd00507f irq 11 at device 13.0 on pci0
xl0: Ethernet address: 00:50:da:26:db:3b
miibus1: <MII bus> on xl0
xlphy0: <3Com internal media interface> on miibus1
xlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
chip1: <AcerLabs M15x3 Power Management Unit> at device 17.0 on pci0
orm0: <Option ROM> at iomem 0xc0000-0xc7fff on isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model IntelliMouse, device ID 3
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode
ppbus0: IEEE1284 device found /NIBBLE/ECP
Probing for PnP devices on ppbus0:
ppbus0: <HEWLETT-PACKARD DESKJET 820C> SCP,VLINK
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
IP packet filtering initialized, divert enabled, rule-based forwarding disabled, default to deny, logging limited to 10 packets/entry by default
ad0: 28629MB <WDC WD300BB-00CCB0> [58168/16/63] at ata0-master UDMA100
acd0: DVD-ROM <CREATIVE DVD-ROM DVD1610E> at ata1-master using PIO4
Mounting root from ufs:/dev/ad0s1a
pcm0: <Acer Labs M5451> port 0xd000-0xd0ff mem 0xdd000000-0xdd000fff irq 5 at device 3.0 on pci0
pcm0: ac97 codec invalid or not present (id == 0)
device_probe_and_attach: pcm0 attach returned 6
pcm0: <Acer Labs M5451> port 0xd000-0xd0ff mem 0xdd000000-0xdd000fff irq 5 at device 3.0 on pci0
pcm0: ac97 codec invalid or not present (id == 0)
device_probe_and_attach: pcm0 attach returned 6
pcm0: <Acer Labs M5451> port 0xd000-0xd0ff mem 0xdd000000-0xdd000fff irq 5 at device 3.0 on pci0
pcm0: ac97 codec invalid or not present (id == 0)
device_probe_and_attach: pcm0 attach returned 6
(Note: I have obviously tried a couple times since my last reboot to load the module ;-)
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20020410082033.0b1121fe.mithril>