Skip site navigation (1)Skip section navigation (2)
Date:      Fri, 25 Apr 2003 22:57:34 +0300
From:      Ruslan Ermilov <ru@freebsd.org>
To:        Nate Lawson <nate@root.org>
Cc:        current@freebsd.org
Subject:   Re: New ACPI diffs ready for testing
Message-ID:  <20030425195734.GA28920@sunbay.com>
In-Reply-To: <Pine.BSF.4.21.0304250123180.64276-100000@root.org>
References:  <Pine.BSF.4.21.0304250123180.64276-100000@root.org>

next in thread | previous in thread | raw e-mail | index | archive | help

--W/nzBZO5zC0uMSeA
Content-Type: text/plain; charset=us-ascii
Content-Disposition: inline
Content-Transfer-Encoding: quoted-printable

On Fri, Apr 25, 2003 at 01:35:24AM -0700, Nate Lawson wrote:
> I have prepared two versions of ACPI for testing, one from the 0228 dist
> and one from 0328.  Both patches are against the current version in the
> tree so you should be able to just "cd /usr/src; zcat *diff.gz | patch". =
=20
> I have tested both pretty thoroughly on my laptop but need more testing
> from others to decide which to import.  Neither crash, but the 0328 dist
> adds a lot more console messages complaining about my battery (see
> separate message for more info on this.)
>=20
>     http://www.root.org/~nate/freebsd/acpi-0228.diff.gz
>     http://www.root.org/~nate/freebsd/acpi-0328.diff.gz
>=20
> Please test these dists so we can import one for 5.1R.  When reporting
> problems, please include dmesg output including the version report I
> temporarily added.  Some important info to send me:
>=20
> * Please send me the output of the following command, especially if your
> motherboard has an interesting PCI bus configuration:
>   pciconf -l; echo; dmesg | egrep AcpiOsDerive\|ACPI\ version
>=20
> * ia64 testing
>=20
> * Look for any regression (things that used to work no longer working)
>=20
I still have the same panic in acpi_thermal.  What should I
do to help debug / fix this problem?

Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD 5.0-CURRENT #5: Fri Apr 25 21:51:56 EEST 2003
    ru@lurker.so-com.net:/usr/obj/usr/src/sys/LURKER
Preloaded elf kernel "/boot/kernel/kernel" at 0xc0498000.
Preloaded elf module "/boot/kernel/if_dc.ko" at 0xc04980a8.
Preloaded elf module "/boot/kernel/if_wi.ko" at 0xc0498154.
Preloaded elf module "/boot/kernel/wlan.ko" at 0xc0498200.
Preloaded elf module "/boot/kernel/rc4.ko" at 0xc04982ac.
Preloaded elf module "/boot/kernel/snd_csa.ko" at 0xc0498354.
Preloaded elf module "/boot/kernel/snd_pcm.ko" at 0xc0498400.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc04984ac.
Timecounter "i8254"  frequency 1193182 Hz
Timecounter "TSC"  frequency 647756108 Hz
CPU: Intel Pentium III (647.76-MHz 686-class CPU)
  Origin =3D "GenuineIntel"  Id =3D 0x681  Stepping =3D 1
  Features=3D0x387f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,=
CMOV,PAT,PSE36,PN,MMX,FXSR,SSE>
real memory  =3D 134021120 (127 MB)
avail memory =3D 125145088 (119 MB)
Pentium Pro MTRR support enabled
ACPI version 20030228 initializing
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <IBM    TP600X  > on motherboard
pcibios: BIOS version 2.10
Using $PIR table, 6 entries at 0xc00f9d00
AcpiOsDerivePciId: bus 0 dev 1 func 0
AcpiOsDerivePciId: bus 0 dev 1 func 0
AcpiOsDerivePciId: bus 0 dev 2 func 0
AcpiOsDerivePciId: bus 0 dev 2 func 1
AcpiOsDerivePciId: bus 0 dev 7 func 3
AcpiOsDerivePciId: bus 0 dev 7 func 1
acpi0: power button is handled as a fixed feature programming model.
Timecounter "ACPI-safe"  frequency 3579545 Hz
    ACPI-0351: *** Error: Could not install PciConfig handler for PCI0, AE_=
ALREADY_EXISTS
AcpiOsDerivePciId: bus 0 dev 0 func 1
acpi_timer0: <24-bit timer at 3.579545MHz> port 0xef08-0xef0b on acpi0
acpi_cpu0: <CPU> on acpi0
acpi_tz0: <thermal zone> on acpi0
acpi_tz1: <thermal zone> on acpi0
acpi_tz2: <thermal zone> on acpi0
acpi_tz3: <thermal zone> on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_button0: <Sleep Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
agp0: <Intel 82443BX (440 BX) host to PCI bridge> mem 0x40000000-0x43ffffff=
 at device 0.0 on pci0
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pci1: <display, VGA> at device 0.0 (no driver attached)
cbb0: <TI1450 PCI-CardBus Bridge> mem 0x50103000-0x50103fff irq 11 at devic=
e 2.0 on pci0
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
cbb1: <TI1450 PCI-CardBus Bridge> mem 0x50102000-0x50102fff irq 11 at devic=
e 2.1 on pci0
cardbus1: <CardBus bus> on cbb1
pccard1: <16-bit PCCard bus> on cbb1
pci0: <simple comms> at device 3.0 (no driver attached)
csa0: <CS4280/CS4614/CS4622/CS4624/CS4630> mem 0x50000000-0x500fffff,0x5010=
0000-0x50100fff irq 11 at device 6.0 on pci0
csa: card is Thinkpad 600X/A20/T20
pcm0: <CS461x PCM Audio> on csa0
pcm0: <Cirrus Logic CS4297A AC97 Codec>
isab0: <PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 UDMA33 controller> port 0xfcf0-0xfcff at device 7.1 o=
n pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
pci0: <serial bus, USB> at device 7.2 (no driver attached)
pci0: <bridge, PCI-unknown> at device 7.3 (no driver attached)
fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> port 0x3f7,0x=
3f0-0x3f5 irq 6 drq 2 on acpi0
fdc0: FIFO enabled, 8 bytes threshold
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
ppc0 port 0x3bc-0x3c3 irq 7 on acpi0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
ppbus0: <Parallel port bus> on ppc0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
sio0 port 0x3f8-0x3ff irq 4 drq 3 on acpi0
sio0: type 16550A
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0
acpi_ec0: <embedded controller> port 0x66,0x62 on acpi0
acpi_cmbat0: <Control method Battery> on acpi0
acpi_cmbat1: <Control method Battery> on acpi0
acpi_acad0: <AC adapter> on acpi0
sio1: configured irq 4 not in bitmap of probed irqs 0
sio1: port may not be enabled
orm0: <Option ROM> at iomem 0xc0000-0xcbfff on isa0
pmtimer0 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=3D0x300>
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounters tick every 10.000 msec
acpi_cpu: throttling enabled, 8 steps (100% to 12.5%), currently 100.0%
system power profile changed to 'economy'
ad0: 11509MB <IBM-DARA-212000> [24944/15/63] at ata0-master UDMA33
acd0: DVD-ROM <LG DVD-ROM DRN-8080B> at ata1-master PIO4
    ACPI-0432: *** Error: Handler for [EmbeddedControl] returned AE_ERROR
    ACPI-1284: *** Error: Method execution failed [\\_SB_.PCI0.ISA0.EC0_.BA=
T0._STA] (Node 0xc184c480), AE_ERROR
    ACPI-0175: *** Error: Method execution failed [\\_SB_.PCI0.ISA0.EC0_.BA=
T0._STA] (Node 0xc184c480), AE_ERROR
    ACPI-0432: *** Error: Handler for [EmbeddedControl] returned AE_ERROR
    ACPI-1284: *** Error: Method execution failed [\\_SB_.PCI0.ISA0.EC0_.BA=
T1._STA] (Node 0xc184c2a0), AE_ERROR
    ACPI-0175: *** Error: Method execution failed [\\_SB_.PCI0.ISA0.EC0_.BA=
T1._STA] (Node 0xc184c2a0), AE_ERROR
    ACPI-0432: *** Error: Handler for [EmbeddedControl] returned AE_ERROR
    ACPI-1284: *** Error: Method execution failed [\\_TZ_.THM0._AC0] (Node =
0xc18520e0), AE_ERROR
Mounting root from ufs:/dev/ad0a
WARNING: / was not properly dismounted
system power profile changed to 'performance'
    ACPI-0432: *** Error: Handler for [EmbeddedControl] returned AE_ERROR
    ACPI-1284: *** Error: Method execution failed [\\_SB_.PCI0.ISA0.EC0_.AC=
__._PSR] (Node 0xc184c1a0), AE_ERROR
    ACPI-0432: *** Error: Handler for [EmbeddedControl] returned AE_ERROR
    ACPI-1284: *** Error: Method execution failed [\\_TZ_.THM6._AC0] (Node =
0xc1851d20), AE_ERROR
WARNING: /tmp was not properly dismounted
WARNING: /usr was not properly dismounted
/usr: superblock summary recomputed
WARNING: /var was not properly dismounted
/var: mount pending error: blocks 48 files 11
/var: superblock summary recomputed
uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0x4000-0x401f irq 11 =
at device 7.2 on pci0
usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
module_register_init: MOD_LOAD (legacy/apm, 0xc01cb010, 0xc190615c) error 1
WARNING: apm_saver module requires apm enabled
    ACPI-0432: *** Error: Handler for [EmbeddedControl] returned AE_ERROR
    ACPI-0432: *** Error: Handler for [EmbeddedControl] returned AE_ERROR
    ACPI-1284: *** Error: Method execution failed [\\_TZ_.THM0._AC0] (Node =
0xc18520e0), AE_ERROR
    ACPI-0432: *** Error: Handler for [EmbeddedControl] returned AE_ERROR
    ACPI-0432: *** Error: Handler for [EmbeddedControl] returned AE_ERROR
    ACPI-1284: *** Error: Method execution failed [\\_TZ_.THM2._AC0] (Node =
0xc1851e40), AE_ERROR


Fatal trap 12: page fault while in kernel mode
fault virtual address	=3D 0x3a0
fault code		=3D supervisor read, page not present
instruction pointer	=3D 0x8:0xc0466910
stack pointer	        =3D 0x10:0xc875dbe0
frame pointer	        =3D 0x10:0xc875dbe0
code segment		=3D base 0x0, limit 0xfffff, type 0x1b
			=3D DPL 0, pres 1, def32 1, gran 1
processor eflags	=3D interrupt enabled, resume, IOPL =3D 0
current process		=3D 21 (acpi_thermal)
panic: from debugger


Fatal trap 3: breakpoint instruction fault while in kernel mode
instruction pointer	=3D 0x8:0xc02a1534
stack pointer	        =3D 0x10:0xc875d95c
frame pointer	        =3D 0x10:0xc875d968
code segment		=3D base 0x0, limit 0xfffff, type 0x1b
			=3D DPL 0, pres 1, def32 1, gran 1
processor eflags	=3D IOPL =3D 0
current process		=3D 21 (acpi_thermal)
panic: from debugger
Uptime: 31s
Dumping 127 MB
ata0: resetting devices ..
done
 16 32 48 64 80 96 112


--=20
Ruslan Ermilov		Sysadmin and DBA,
ru@sunbay.com		Sunbay Software AG,
ru@FreeBSD.org		FreeBSD committer,
+380.652.512.251	Simferopol, Ukraine

http://www.FreeBSD.org	The Power To Serve
http://www.oracle.com	Enabling The Information Age

--W/nzBZO5zC0uMSeA
Content-Type: application/pgp-signature
Content-Disposition: inline

-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.2.1 (FreeBSD)

iD8DBQE+qZMuUkv4P6juNwoRAmVoAJ9bQePMOIa4cqMZNMzJlF7OU7v2YwCfdbMs
eZEH97l+VPVaCXPXcBs3Ca4=
=ktHH
-----END PGP SIGNATURE-----

--W/nzBZO5zC0uMSeA--



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20030425195734.GA28920>