Date: Mon, 16 Apr 2007 18:10:47 +0000 From: "Rick Nekus" <solarux@hotmail.com> To: usleepless@gmail.com Cc: freebsd-multimedia@freebsd.org Subject: Re: latest pvrxxx ; 20071304 ; choppy audio/video still - UPDATE Message-ID: <BAY134-F68CCEE0E2A40516B21E56A1520@phx.gbl> In-Reply-To: <c39ec84c0704141209n3bf01d30g1c682078730a44b0@mail.gmail.com>
next in thread | previous in thread | raw e-mail | index | archive | help
usleep, LIST: -update; With a (much deserverd) thanks to usleep, and all on this list my pvr-350 (NTSC) is workin very well now; A/V receptoin (via CableTV),and channel selection via ...setchannel <freq.>, ... are all OK. -so far so good. hey, if there's anything you think I could try n help with, just let me know, since I'll probably be asking more questions as I learn myself. :) regards, Rick. >From: usleepless@gmail.com >To: "Rick Nekus" <solarux@hotmail.com> >Subject: Re: latest pvrxxx ; 20071304 ; choppy audio/video still >Date: Sat, 14 Apr 2007 21:09:34 +0200 > >Rick, > >On 4/14/07, Rick Nekus <solarux@hotmail.com> wrote: >>Hi all, update regarding latest pvrxxx-20071304 >> >>Tunercard: pvr-350 , Tuner NTSC see dmesg below for details. >> >>Response: >>I replaced my aerial (possible interference issues) with a Cable-TV >>connection. >>so far so good!, finally getting A/V on all 70 channels, (using >>...setchannel freq) with no errors in messages yet. >>A/V is choppy though. >> >>Symtoms: >>but its crappy( hard to explain really unless you see it, but the picture >>is >>cut in half, and the soound is choppy) -The pvr-350 is ok I checked it >>recently again in another box. >>It seems its a "sync" issue with the my Tuner -but I'm just guessing here. >> >>Sean, I'm curious is yours pvr500 and NTSC-tuner, or pvr350 ?, NTSC >>frequenciy settings should be standard anyway, obviously our tuners maybe >>different, -I must have an oddball. >> >> >>dmesg... >> >>cxm0: <Conexant iTVC15 MPEG Coder> mem 0xf4000000-0xf7ffffff irq 21 at >>device 10.0 on pci2 >>cxm_iic0: <Conexant iTVC15 / iTVC16 I2C controller> on cxm0 >>iicbb0: <I2C bit-banging driver> on cxm_iic0 >>iicbus0: <Philips I2C bus> on iicbb0 master-only >><2>tveeprom: ivtv version >><2>tveeprom: Hauppauge: model = 48132, rev = K268, serial# = 9939981 >><2>tveeprom: tuner = LG TAPE H001F MK3 (idx = 68, type = 47) >><2>tveeprom: tuner fmt = NTSC(M) (eeprom = 0x08, v4l2 = 0x00001000) >><2>tveeprom: audio processor = MSP4448 (type = 1b) >><2>tveeprom: decoder processor = SAA7115 (type = 13) >>tuner type: 47 >>cxm0: Eeprom NTSC >>tuner: type set to 47 (LG NTSC (TAPE series)) by cxm >>tuner: switching to v4l2 >>before tuner_command! >>tuner: tv freq set to 61.25 >>tuner: tv 0x06 0xb0 0x8e 0x01 >>cxm0: SAA7115 rev 1 video decoder >>cxm0: MSP4448G-A2 audio decoder >>cxm0: IR Remote >>cxm0: [FAST] >>cxm0: encoder firmware version 0x2060039 >>cxm0: decoder firmware version 0x2020023 >>before tuner_command! >>tuner: tv freq set to 265.25 >>tuner: tv 0x13 0x70 0x8e 0x02 >>-------------------------------------------------------- >> >>thanks, Rick. > >is it ok for me to come in and check it out myself now you have cable? > >is the IP address the same? > >regards, > >usleep _________________________________________________________________ Get the Kung Fu Bunny Theme pack free! http://www.imagine-windowslive.com/Themes/Messenger/Reward/Default.aspx?Locale=en-CA#
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?BAY134-F68CCEE0E2A40516B21E56A1520>