Date: Sat, 01 Mar 2003 04:50:24 +0900 From: "Akinori MUSHA" <knu@iDaemons.org> To: sos@FreeBSD.org, current@FreeBSD.org Subject: HPT372 UDMA detection problem on current Message-ID: <86k7fkxjzz.wl%knu@iDaemons.org>
next in thread | raw e-mail | index | archive | help
Hi,
Using the latest CURRENT on my box, the ata driver fails to enable
UDMA for the ATA133 disks connected to an on-board HPT372 controller.
Besides, UDMA is not enabled for the CD/DVD-ROM drive which is capable
of UDMA4 either, but this may be a feature or a default, I guess.
Any ideas?
dmesg:
atapci0: <HighPoint HPT372 UDMA133 controller> port
0xc000-0xc0ff,0xbc00-0xbc03,
0xb800-0xb807,0xb400-0xb403,0xb000-0xb007 irq 11 at device 11.0 on pci1
ata2: at 0xb000 on atapci0
ata3: at 0xb800 on atapci0
atapci1: <nVidia nForce UDMA100 controller> port 0xe000-0xe00f at device 9.0 on pci0
ata0: at 0x1f0 irq 14 on atapci1
ata1: at 0x170 irq 15 on atapci1
acd0: DVD-ROM <Pioneer DVD-ROM ATAPIModel DVD-106S 0122> at ata1-slave PIO4
ar0: 156334MB <ATA RAID0 array> [19929/255/63] status: READY subdisks:
0 READY ad4: 78167MB <Maxtor 6Y080P0> [158816/16/63] at ata2-master PIO4
1 READY ad6: 78167MB <Maxtor 6Y080P0> [158816/16/63] at ata3-master PIO4
pciconf:
atapci0@pci1:11:0: class=0x010400 card=0x00011103 chip=0x00041103 rev=0x05 hdr=0x00
vendor = 'HighPoint Technologies Inc.'
device = 'HPT3xx UDMA66/100/133 EIDE Controller'
class = mass storage
subclass = RAID
atapci1@pci0:9:0: class=0x01018a card=0x0c1110de chip=0x01bc10de rev=0xc3 hdr=0x00
vendor = 'Nvidia Corporation'
device = 'nForce ATA Controller'
class = mass storage
subclass = ATA
atacontrol list:
ATA channel 0:
Master: no device present
Slave: no device present
ATA channel 1:
Master: no device present
Slave: acd0 <Pioneer DVD-ROM ATAPIModel DVD-106S 0122/E1.22> ATA/ATAPI rev 5
ATA channel 2:
Master: ad4 <Maxtor 6Y080P0/YAR41VW0> ATA/ATAPI rev 7
Slave: no device present
ATA channel 3:
Master: ad6 <Maxtor 6Y080P0/YAR41VW0> ATA/ATAPI rev 7
Slave: no device present
atacontrol mode 1:
Master = ???
Slave = PIO4
atacontrol mode 2:
Master = PIO4
Slave = ???
atacontrol mode 3
Master = PIO4
Slave = ???
Regards,
--
/
/__ __ Akinori.org / MUSHA.org
/ ) ) ) ) / FreeBSD.org / Ruby-lang.org
Akinori MUSHA aka / (_ / ( (__( @ iDaemons.org / and.or.jp
"It went right by me -- At the time it went over my head
I was looking out the window.. I should have looked at your face instead"
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-current" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?86k7fkxjzz.wl%knu>