Date: Tue, 13 Jun 2000 17:01:40 +0200 (CEST) From: =?ISO-8859-1?Q?G=E9rard_Roudier?= <groudier@club-internet.fr> To: "Bradley T. Hughes" <bhughes@trolltech.com> Cc: freebsd-stable@FreeBSD.ORG, freebsd-scsi@FreeBSD.ORG Subject: Re: Problem with newer sym driver on a Tekram DC-390U2W controller Message-ID: <Pine.LNX.4.10.10006131654420.636-100000@linux.local> In-Reply-To: <Pine.LNX.4.10.10006131529260.213-100000@linux.local>
next in thread | previous in thread | raw e-mail | index | archive | help
I just downloaded the latest Tekram driver sources for FreeBSD-4.0 and the files contains all information I need about the sync. table. Thus, the below testing are no longer needed. Regards, G=E9rard. On Tue, 13 Jun 2000, G=E9rard Roudier wrote: [ ... ] > > I have attached a few dmesg logs, and will gladly provide other > > information if necessary. >=20 > If you have time for doing the following tests, this would allow me to fi= x > correctly the Tekram NVRAM sync. table: >=20 > 1) Use latest sym-1.6.1 driver (for 4.0 just steal driver files from > -current) > (You may patch it prior to do the tests, but it is not required) >=20 > 2) Edit sym_hipd.c and add the following 'define' at the beginning of > the source:=20 > #define=09SYM_CONF_DEBUG_NVRAM > (Or add -DSYM_CONF_DEBUG_NVRAM to the compilation options) >=20 > 3) Starting with 20 Mega-transfers per second until maximum possible, try > successivelly several sync. speeds (all values if only the 4 possible > discrete values are allowed) from the NVRAM and send me the driver boo= t > messages. If you have several SCSI devices, using different values for > each device can cover the sync. value range in a fiew runs. >=20 > Thanks in advance, >=20 > Regards, > Gerard. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-stable" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.LNX.4.10.10006131654420.636-100000>