Date: Thu, 15 Apr 2004 11:02:48 -0400 (EDT) From: "Mike Jakubik" <mikej@rogers.com> To: freebsd-current@freebsd.org Subject: Re: Is a BAD BAR something to worry about? Message-ID: <64018.66.11.183.182.1082041368.squirrel@69.193.41.47> In-Reply-To: <20040415124313.GA94100@stud326.idi.ntnu.no> References: <20040414171146.GF64506@arved.at> <20040415124313.GA94100@stud326.idi.ntnu.no>
next in thread | previous in thread | raw e-mail | index | archive | help
Morten Rodal said: > On Wed, Apr 14, 2004 at 07:11:46PM +0200, Tilman Linneweh wrote: >> Hi, >> >> With todays CURRENT my ata controllers are a bit more verbose: >> >> atapci1: <VIA 6420 SATA150 controller> port >> 0xd000-0xd0ff,0xd400-0xd40f,0xd800-0xd803,0xe000-0xe007,0xe400-0xe403,0xe800-0xe807 >> irq 20 at device 15.0 on pci0 >> atapci1: Reserved 0x10 bytes for rid 0x20 type 4 at 0xd400 >> atapci1: Reserved 0x8 bytes for rid 0x10 type 4 at 0xe800 >> atapci1: Reserved 0x4 bytes for rid 0x14 type 4 at 0xe400 >> ata5: at 0xe800 on atapci1 >> atapci1: Reserved 0x8 bytes for rid 0x18 type 4 at 0xe000 >> atapci1: Reserved 0x4 bytes for rid 0x1c type 4 at 0xd800 >> ata6: at 0xe000 on atapci1 >> atapci2: <VIA 8237 UDMA133 controller> port 0xfc00-0xfc0f at device 15.1 >> on pci0 > > I get these too, everything works so I'm not that worried (yet?) > "Me Too" But my fdc stopped working, and ACPI errors. atapci0: <VIA 82C686B UDMA100 controller> port 0xb800-0xb80f at device 4.1 on pci0 atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0xb800 atapci0: BAD BAR: skipping checks atapci0: Lazy allocation of 0x8 bytes rid 0x10 type 4 at 0x1f0 atapci0: BAD BAR: skipping checks atapci0: Lazy allocation of 0x4 bytes rid 0x14 type 4 at 0x3f4 ata0: at 0x1f0 irq 14 on atapci0 atapci0: BAD BAR: skipping checks atapci0: Lazy allocation of 0x8 bytes rid 0x18 type 4 at 0x170 atapci0: BAD BAR: skipping checks atapci0: Lazy allocation of 0x4 bytes rid 0x1c type 4 at 0x374 ata1: at 0x170 irq 15 on atapci0 pci0: <serial bus, USB> at device 4.2 (no driver attached) pci0:4:2: Transition from D0 to D3 pci0: Failed to set ACPI power state D3 on (null): AE_BAD_PARAMETER pci0: <serial bus, USB> at device 4.3 (no driver attached) pci0:4:3: Transition from D0 to D3 pci0: Failed to set ACPI power state D3 on (null): AE_BAD_PARAMETER pci0: <bridge, PCI-unknown> at device 4.4 (no driver attached) pci0:4:4: Transition from D0 to D3 pci0: Failed to set ACPI power state D3 on (null): AE_BAD_PARAMETER xl0: <3Com 3c905C-TX Fast Etherlink XL> port 0x9400-0x947f mem 0xc6000000-0xc600007f irq 5 at device 9.0 on pci0 xl0: Reserved 0x80 bytes for rid 0x14 type 3 at 0xc6000000 miibus0: <MII bus> on xl0 ukphy0: <Generic IEEE 802.3u media interface> on miibus0 ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto xl0: Ethernet address: 00:01:03:d4:4c:07 xl0: [GIANT-LOCKED] fxp0: <Intel 82551 Pro/100 Ethernet> port 0x9000-0x903f mem 0xc5000000-0xc501ffff,0xc5800000-0xc5800fff irq 12 at device 10.0 on pci0 fxp0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xc5800000 miibus1: <MII bus> on fxp0 inphy0: <i82555 10/100 media interface> on miibus1 inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto fxp0: Ethernet address: 00:07:e9:0f:8d:5e fxp0: [GIANT-LOCKED] pcn0: Reserved 0x20 bytes for rid 0x10 type 4 at 0x8800 pcn0: <AMD PCnet/Home HomePNA> port 0x8800-0x881f mem 0xc4800000-0xc480001f irq 10 at device 11.0 on pci0 miibus2: <MII bus> on pcn0 pnaphy0: <Am79c978 HomePNA PHY> on miibus2 pnaphy0: HomePNA pcn0: Ethernet address: 00:d0:41:00:04:c9 pcn0: [GIANT-LOCKED] atapci1: <Promise PDC20265 UDMA100 controller> port 0x7000-0x703f,0x7400-0x7403,0x7800-0x7807,0x8000-0x8003,0x8400-0x8407 mem 0xc4000000-0xc401ffff irq 10 at device 17.0 on pci0 atapci1: Reserved 0x40 bytes for rid 0x20 type 4 at 0x7000 atapci1: Reserved 0x8 bytes for rid 0x10 type 4 at 0x8400 atapci1: Reserved 0x4 bytes for rid 0x14 type 4 at 0x8000 ata2: at 0x8400 on atapci1 atapci1: Reserved 0x8 bytes for rid 0x18 type 4 at 0x7800 atapci1: Reserved 0x4 bytes for rid 0x1c type 4 at 0x7400 ata3: at 0x7800 on atapci1 fdc0: cannot reserve I/O port range (1 ports) ppc0 port 0x778-0x77b,0x378-0x37f irq 7 drq 3 on acpi0 ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/8 bytes threshold ppbus0: <Parallel port bus> on ppc0 lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port sio0 port 0x3f8-0x3ff irq 4 on acpi0 sio0: type 16550A sio1 port 0x2f8-0x2ff irq 3 on acpi0 sio1: type 16550A atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] fdc0: cannot reserve I/O port range (1 ports)
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?64018.66.11.183.182.1082041368.squirrel>