Date: Wed, 27 Jul 2005 15:29:41 +0200 From: John Angelmo <john@veidit.net> To: =?ISO-8859-1?Q?Dag-Erling_Sm=F8rgrav?= <des@des.no> Cc: freebsd-hardware@freebsd.org Subject: Re: Booting with Promise FastTrak S150 SX4-M Message-ID: <42E78C45.1070005@veidit.net> In-Reply-To: <864qag5qz0.fsf@xps.des.no> References: <42DF83BE.3090007@veidit.net> <864qag5qz0.fsf@xps.des.no>
next in thread | previous in thread | raw e-mail | index | archive | help
Dag-Erling Smørgrav wrote: > John Angelmo <john@veidit.net> writes: > >>is it possible to get the S150 SX4-M working with FreeBSD (stable or >>current)? > > > Mine works fine (with four Maxtor 6B300S0 disks) under both 6.0 and > 7.0. Note that RAID5 isn't supported yet, though. > > DES Hmm what could I be missing? This is the atastuff of DMSG atapci0: <Promise PDC20622 SATA150 controller> port 0xec00-0xecff,0xe800-0xe8ff,0xe400-0xe4ff mem 0xdff00000-0xdfffffff,0xdfef8000-0xdfefffff irq 17 at device 6.0 on pci0 atapci0: DIMM size 64MB @ 0x00000000 ECC enabled ata2: <ATA channel 0> on atapci0 ata3: <ATA channel 1> on atapci0 ata4: <ATA channel 2> on atapci0 ata5: <ATA channel 3> on atapci0 atapci1: <VIA 6420 SATA150 controller> port 0xe000-0xe007,0xdc00-0xdc03,0xd800-0xd807,0xd400-0xd403,0xd000-0xd00f,0xcc00-0xccff irq 20 at device 15.0 on pci0 ata6: <ATA channel 0> on atapci1 ata7: <ATA channel 1> on atapci1 atapci2: <VIA 8237 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xfc00-0xfc0f at device 15.1 on pci0 ata0: <ATA channel 0> on atapci2 ata1: <ATA channel 1> on atapci2 But now I have no installed drives on my promise card /John
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?42E78C45.1070005>