Date: Wed, 1 Jan 2014 16:09:38 GMT From: Huub Schuurmans <huub@wirelessleiden.nl> To: freebsd-gnats-submit@FreeBSD.org Subject: kern/185387: if_axe usb ethernet interface no ssh, no http with 10.0-RC3 Message-ID: <201401011609.s01G9cHL006376@oldred.freebsd.org> Resent-Message-ID: <201401011610.s01GA0FF049738@freefall.freebsd.org>
next in thread | raw e-mail | index | archive | help
>Number: 185387 >Category: kern >Synopsis: if_axe usb ethernet interface no ssh, no http with 10.0-RC3 >Confidential: no >Severity: non-critical >Priority: low >Responsible: freebsd-bugs >State: open >Quarter: >Keywords: >Date-Required: >Class: sw-bug >Submitter-Id: current-users >Arrival-Date: Wed Jan 01 16:10:00 UTC 2014 >Closed-Date: >Last-Modified: >Originator: Huub Schuurmans >Release: 10.0-RC3 >Organization: Wireless Leiden >Environment: 10.0-RC3 FreeBSD 10.0-RC3 #0 r260039M: Sun Dec 29 22:04:42 CET 2013 ugen1.2: <product 0x772b vendor 0x0b95> at usbus1, cfg=0 md=HOST spd=HIGH (480Mbps) pwr=ON (200mA) >Description: USB-LAN adapters with the ASIX AX88772 chip do not work properly on 10.0-RC3, whereas thera are no problems with 9.0-RELEASE. Ping and dhcp work, ssh and http do not. Test setup consists of two ALIX.2 boards (uses CPU: Geode(TM) Integrated Processor by AMD PCS 498.06-MHz 586-class CPU and an AMD CS5536 (Geode) USB 2.0 controller) Host9.0-RELEASE with httpd, sshd, dhcpd running, connected with utp-cable (tested) to host10.0-RC3 with usb-lan adapter connected: ue0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500 options=8000b<RXCSUM,TXCSUM,VLAN_MTU,LINKSTATE> ether 00:00:00:00:00:01 inet6 fe80::200:ff:fe00:1 %ue0 prefixlen 64 scopeid 0x8 inet 172.16.6.77 netmask 0xfffffff8 broadcast 172.16.6.79 nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL> media: Ethernet autoselect (100baseTX <full-duplex>) status: active Ping and dhcp from host10.0-RC3 to Host9.0-RELEASE is OK, but ssh and fetch (http) time out. Same setup with both hosts running 9.0-RELEASE functions without problems Same setup with hostRC10-RC3 and different usb-lan adapter works OK (I tested if_aue, if_udav and if_mos). >How-To-Repeat: setup a similar test with two hosts and this usb-lan adapter >Fix: >Release-Note: >Audit-Trail: >Unformatted:
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?201401011609.s01G9cHL006376>