Date: Mon, 5 May 1997 17:29:31 +0200 (MET DST) From: Alexander Fuchsstadt <afuchs@totum.plaut.de> To: Stefan Esser <se@freebsd.org> Cc: hackers@freebsd.org Subject: Re: Compaq Integrated Netflex Ethernet Card Message-ID: <Pine.BSF.3.95.970505172210.11005A-200000@totum.plaut.de> In-Reply-To: <19970430155249.14655@x14.mi.uni-koeln.de>
index | next in thread | previous in thread | raw e-mail
[-- Attachment #1 --]
Hi Stefan,
I installed a new snap of fBSD with a standard ne2000-compatible ethernet
controller. The attachment-file contains a complete dmesg text file from a
verbose boot.
I don't know well the pci-thing, so changing the source is rare easy to
me, however I did, and I'm now building new kernel.... The isa driver
(lnc0) don't work, but maybe I'm too stupid, am I?
I hope you know a workaround for it.
Bye Alex
[-- Attachment #2 --]
Copyright (c) 1992-1997 FreeBSD Inc.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
FreeBSD 3.0-970501-SNAP #0: Sat Jun 20 00:34:44 GMT 1992
root@basis.plaut.de:/usr/src/sys/compile/BASIS
Calibrating clock(s) ... i586 clock: 167050934 Hz, i8254 clock: 1193222 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
CLK_USE_I586_CALIBRATION not specified - using old calibration method
CPU: Pentium (167.05-MHz 586-class CPU)
Origin = "GenuineIntel" Id = 0x52c Stepping=12
Features=0x1bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8>
real memory = 33554432 (32768K bytes)
avail memory = 30502912 (29788K bytes)
pcibus_setup(1): mode 1 addr port (0x0cf8) is 0x80003800
pcibus_setup(1a): mode1res=0x00000000 (0x80000000)
pcibus_setup(1b): mode1res=0x80000000 (0xff000001)
pcibus_check: device 0 [class=60000] [hdr=ff] 1 2 3 4 5 6 7 [class=30000] [hdr=0] is there (id=0519102b)
Probing for devices on PCI bus 0:
configuration mode 1 allows 32 devices.
chip0 <Host to PCI bridge (vendor=0e11 device=4000)> rev 1 int 9 irq 32 on pci0:0:0
mapreg[10] type=0 addr=00217e10 size=ffde81f0.
mapreg[14] type=0 addr=0018daa0 size=ffe72560.
mapreg[18] type=0 addr=00013f10 size=fffec0f0.
mapreg[1c] type=0 addr=00201940 size=ffdfe6c0.
mapreg[20] type=1 addr=40000e10 size=0010.
chip1 <Host to PCI bridge (vendor=0e11 device=4000)> rev 1 int N irq 224 on pci0:0:1
mapreg[10] type=0 addr=00217e10 size=ffde81f0.
mapreg[14] type=0 addr=00201940 size=ffdfe6c0.
mapreg[18] type=0 addr=00013f10 size=fffec0f0.
mapreg[1c] type=0 addr=00201940 size=ffdfe6c0.
mapreg[20] type=1 addr=40000e10 size=0010.
chip2 <Host to PCI bridge (vendor=0e11 device=4000)> rev 1 int P irq 32 on pci0:0:2
mapreg[10] type=0 addr=00217e10 size=ffde81f0.
mapreg[14] type=0 addr=00201940 size=ffdfe6c0.
mapreg[18] type=0 addr=00013f10 size=fffec0f0.
mapreg[1c] type=0 addr=00201940 size=ffdfe6c0.
mapreg[20] type=1 addr=40000e10 size=0010.
chip3 <Host to PCI bridge (vendor=0e11 device=4000)> rev 1 int Q irq 96 on pci0:0:3
mapreg[10] type=0 addr=00217e10 size=ffde81f0.
mapreg[14] type=0 addr=00201940 size=ffdfe6c0.
mapreg[18] type=0 addr=00013f10 size=fffec0f0.
mapreg[1c] type=0 addr=00201940 size=ffdfe6c0.
mapreg[20] type=1 addr=40000e10 size=0010.
chip4 <Host to PCI bridge (vendor=0e11 device=4000)> rev 1 int R irq 160 on pci0:0:4
mapreg[10] type=0 addr=00217e10 size=ffde81f0.
mapreg[14] type=0 addr=00201940 size=ffdfe6c0.
mapreg[18] type=0 addr=00013f10 size=fffec0f0.
mapreg[1c] type=0 addr=00201940 size=ffdfe6c0.
mapreg[20] type=1 addr=40000e10 size=0010.
chip5 <Host to PCI bridge (vendor=0e11 device=4000)> rev 1 int S irq 224 on pci0:0:5
mapreg[10] type=0 addr=00217e10 size=ffde81f0.
mapreg[14] type=0 addr=00201940 size=ffdfe6c0.
mapreg[18] type=0 addr=00013f10 size=fffec0f0.
mapreg[1c] type=0 addr=00201940 size=ffdfe6c0.
mapreg[20] type=1 addr=40000e10 size=0010.
chip6 <Host to PCI bridge (vendor=0e11 device=4000)> rev 1 int U irq 32 on pci0:0:6
mapreg[10] type=0 addr=00217e10 size=ffde81f0.
mapreg[14] type=0 addr=00201940 size=ffdfe6c0.
mapreg[18] type=0 addr=00013f10 size=fffec0f0.
mapreg[1c] type=0 addr=00201940 size=ffdfe6c0.
mapreg[20] type=1 addr=40000e10 size=0010.
chip7 <Host to PCI bridge (vendor=0e11 device=4000)> rev 1 int V irq 96 on pci0:0:7
mapreg[10] type=0 addr=00217e10 size=ffde81f0.
mapreg[14] type=0 addr=00201940 size=ffdfe6c0.
mapreg[18] type=0 addr=00013f10 size=fffec0f0.
mapreg[1c] type=0 addr=00201940 size=ffdfe6c0.
mapreg[20] type=1 addr=40000e10 size=0010.
vga0 <VGA-compatible display device> rev 1 int a irq 11 on pci0:7:0
mapreg[10] type=0 addr=40080000 size=4000.
mapreg[14] type=0 addr=40800000 size=800000.
ahc0 <Adaptec 2940 Ultra SCSI host adapter> rev 0 int a irq 11 on pci0:9:0
mapreg[10] type=1 addr=00001400 size=0100.
mapreg[14] type=0 addr=40100000 size=1000.
reg16: ioaddr=0x1400 size=0x100
ahc0: Reading SEEPROM...done.
internal50 cable is present
internal68 cable not present
brdctl == 0xac
external cable not present
eprom is present
brdctl == 0xec
low byte termination enabled, high byte termination disabled
ahc0: aic7880 Single Channel, SCSI Id=7, 16 SCBs
ahc0: Downloading Sequencer Program...ahc0: 376 instructions downloaded
Done
ahc0: Probing channel A
ahc0: waiting for scsi devices to settle
scbus0 at ahc0 bus 0
ahc0: target 0 synchronous at 20.0MHz, offset = 0xf
sd0 at scbus0 target 0 lun 0
sd0: <COMPAQPC DORS-32160 WA8B> type 0 fixed SCSI 2
sd0: Direct-Access 2006MB (4110000 512 byte sectors)
sd0: with 6703 cyls, 5 heads, and an average 122 sectors/track
ahc0: target 5 synchronous at 5.0MHz, offset = 0x8
cd0 at scbus0 target 5 lun 0
cd0: <COMPAQ PD-1 LF-1094C B110> type 5 removable SCSI 2
cd0: CD-ROM can't get the size
pci0:11: Compaq, device=0xae35, class=network (misc) int a irq 9 [no driver assigned]
map(10): io(1000)
map(14): mem32(40000000)
chip8 <PCI to ISA bridge (vendor=0e11 device=a0f3)> rev 10 on pci0:15:0
pci0:15:1: Compaq, device=0xae33, class=storage (ide) int a irq 14 [no driver assigned]
map(10): io(01f0)
map(14): io(03f4)
map(18): io(0170)
map(1c): io(0374)
map(20): io(1010)
pci0: uses 4252633632d bytes of memory from 18daa0 upto ffffffff.
pci0: uses 384d bytes of I/O space from e10 upto 14ff.
Probing for devices on the ISA bus:
sc0: the current keyboard controller command byte 0065
kbdio: RESET_KBD return code:00fa
kbdio: RESET_KBD status:00aa
sc0 at 0x60-0x6f irq 1 on motherboard
sc0: BIOS video mode:3
sc0: VGA registers upon power-up
50 18 10 00 10 00 03 00 02 67 60 4f 50 83 55 81
bf 1f 00 4f 0d 0e 00 00 ff ff 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
sc0: video mode:24
sc0: VGA registers for mode:24
50 18 10 00 10 00 03 00 02 67 60 4f 50 83 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
sc0: VGA color <16 virtual consoles, flags=0x0>
ed0 at 0x300-0x31f irq 10 on isa
ed0: address 00:80:c6:ff:33:8f, type NE2000 (16 bit)
sio0 at 0x3f8-0x3ff irq 4 on isa
sio0: type 16550A
sio1 at 0x2f8-0x2ff irq 3 on isa
sio1: type 16550A
lpt0 at 0x378-0x37f irq 7 on isa
lpt0: Interrupt-driven port
lp0: TCP/IP capable interface
psm0: disabled, not probed.
fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa
fdc0: NEC 72065B
fd0: 1.44MB 3.5in
npx0 on motherboard
npx0: INT 16 interface
imasks: bio c0000840, tty f000049a, net f000049a
BIOS Geometries:
0:00fefe3f 0..254=255 cylinders, 0..254=255 heads, 1..63=63 sectors
0 accounted for
Device configuration finished.
Considering FFS root f/s.
changing root device to sd0a
configure() finished.
sd0s1: type 0xa5, start 48195, end = 4096574, size 4048380 : OK
sd0s3: type 0x12, start 63, end = 48194, size 48132 : OK
help
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.BSF.3.95.970505172210.11005A-200000>