Date: Fri, 7 Jul 2000 23:23:13 -0400 From: "dave" <dmehler22@earthlink.net> To: "Adam" <bsdx@looksharp.net> Cc: <freebsd-hardware@freebsd.org> Subject: Re: configuring a pnp modem. Message-ID: <000801bfe88b$db78f9e0$0200a8c0@hellraiser> References: <Pine.BSF.4.21.0007061927090.1323-100000@turtle.looksharp.net>
next in thread | previous in thread | raw e-mail | index | archive | help
Hello,
Thanks for the reply. Below is the output of pnpinfo, I hope it helps.
Again, I'm using fbsd 4.0-release.
Thanks.
Dave.
Checking for Plug-n-Play devices...
Card assigned CSN #1
Vendor ID CTL002b (0x2b008c0e), Serial Number 0x1008505d
PnP Version 1.0, Vendor Version 32
Device Description: Creative SB16 PnP
Logical Device ID: CTL0031 0x31008c0e #0
Device Description: Audio
TAG Start DF
Good Configuration
IRQ: 5 - only one type (true/edge)
DMA: channel(s) 1
8-bit, not a bus master, count by byte, , Compatibility mode
DMA: channel(s) 5
16-bit, not a bus master, , count by word, Compatibility mode
I/O Range 0x220 .. 0x220, alignment 0x1, len 0x10
[16-bit addr]
I/O Range 0x330 .. 0x330, alignment 0x1, len 0x2
[16-bit addr]
I/O Range 0x388 .. 0x388, alignment 0x1, len 0x4
[16-bit addr]
TAG Start DF
Acceptable Configuration
IRQ: 5 7 10 - only one type (true/edge)
DMA: channel(s) 0 1 3
8-bit, not a bus master, count by byte, , Compatibility mode
DMA: channel(s) 5 6 7
16-bit, not a bus master, , count by word, Compatibility mode
I/O Range 0x220 .. 0x280, alignment 0x20, len 0x10
[16-bit addr]
I/O Range 0x300 .. 0x330, alignment 0x30, len 0x2
[16-bit addr]
I/O Range 0x388 .. 0x388, alignment 0x1, len 0x4
[16-bit addr]
TAG Start DF
Acceptable Configuration
IRQ: 5 7 10 - only one type (true/edge)
DMA: channel(s) 0 1 3
8-bit, not a bus master, count by byte, , Compatibility mode
DMA: channel(s) 5 6 7
16-bit, not a bus master, , count by word, Compatibility mode
I/O Range 0x220 .. 0x280, alignment 0x20, len 0x10
[16-bit addr]
I/O Range 0x300 .. 0x330, alignment 0x30, len 0x2
[16-bit addr]
TAG Start DF
Sub-optimal Configuration
IRQ: 5 7 10 - only one type (true/edge)
DMA: channel(s) 0 1 3
8-bit, not a bus master, count by byte, , Compatibility mode
DMA: channel(s) 5 6 7
16-bit, not a bus master, , count by word, Compatibility mode
I/O Range 0x220 .. 0x280, alignment 0x20, len 0x10
[16-bit addr]
TAG Start DF
Sub-optimal Configuration
IRQ: 5 7 10 - only one type (true/edge)
DMA: channel(s) 0 1 3
8-bit, not a bus master, count by byte, , Compatibility mode
I/O Range 0x220 .. 0x280, alignment 0x20, len 0x10
[16-bit addr]
I/O Range 0x300 .. 0x330, alignment 0x30, len 0x2
[16-bit addr]
I/O Range 0x388 .. 0x388, alignment 0x1, len 0x4
[16-bit addr]
TAG Start DF
Sub-optimal Configuration
IRQ: 5 7 10 - only one type (true/edge)
DMA: channel(s) 0 1 3
8-bit, not a bus master, count by byte, , Compatibility mode
I/O Range 0x220 .. 0x280, alignment 0x20, len 0x10
[16-bit addr]
I/O Range 0x300 .. 0x330, alignment 0x30, len 0x2
[16-bit addr]
TAG Start DF
Sub-optimal Configuration
IRQ: 5 7 10 11 - only one type (true/edge)
DMA: channel(s) 0 1 3
8-bit, not a bus master, count by byte, , Compatibility mode
I/O Range 0x220 .. 0x280, alignment 0x20, len 0x10
[16-bit addr]
TAG End DF
Logical Device ID: CTL2011 0x11208c0e #1
Compatible Device ID: PNP0600 (0006d041)
Device Description: IDE
TAG Start DF
Good Configuration
IRQ: 10 - only one type (true/edge)
I/O Range 0x168 .. 0x168, alignment 0x1, len 0x8
[16-bit addr]
I/O Range 0x36e .. 0x36e, alignment 0x1, len 0x2
[16-bit addr]
TAG Start DF
Acceptable Configuration
IRQ: 11 - only one type (true/edge)
I/O Range 0x1e8 .. 0x1e8, alignment 0x1, len 0x8
[16-bit addr]
I/O Range 0x3ee .. 0x3ee, alignment 0x1, len 0x2
[16-bit addr]
TAG Start DF
Acceptable Configuration
IRQ: 10 11 15 - only one type (true/edge)
I/O Range 0x180 .. 0x1b8, alignment 0x8, len 0x8
[16-bit addr]
I/O Range 0x306 .. 0x33e, alignment 0x8, len 0x2
[16-bit addr]
TAG Start DF
Sub-optimal Configuration
IRQ: 15 - only one type (true/edge)
I/O Range 0x170 .. 0x170, alignment 0x1, len 0x8
[16-bit addr]
I/O Range 0x376 .. 0x376, alignment 0x1, len 0x1
[16-bit addr]
TAG End DF
Logical Device ID: CTL0051 0x51008c0e #2
Device Description: StereoEnhance
I/O Range 0x100 .. 0x138, alignment 0x8, len 0x1
[16-bit addr]
Logical Device ID: CTL7001 0x01708c0e #3
Device Description: Game
I/O Range 0x200 .. 0x200, alignment 0x1, len 0x8
[16-bit addr]
End Tag
Successfully got 71 resources, 4 logical fdevs
-- card select # 0x0001
CSN CTL002b (0x2b008c0e), Serial Number 0x1008505d
Logical device #0
IO: 0x0220 0x0220 0x0220 0x0220 0x0220 0x0220 0x0220 0x0220
IRQ 5 0
DMA 1 5
IO range check 0x00 activate 0x01
Logical device #1
IO: 0x03ee 0x03ee 0x03ee 0x03ee 0x03ee 0x03ee 0x03ee 0x03ee
IRQ 11 0
DMA 4 4
IO range check 0x00 activate 0x01
Logical device #2
IO: 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000
IRQ 0 0
DMA 4 4
IO range check 0x00 activate 0x01
Logical device #3
IO: 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000
IRQ 0 0
DMA 4 4
IO range check 0x00 activate 0x01
Card assigned CSN #2
Vendor ID USR3030 (0x30307256), Serial Number 0xaebc8fb4
PnP Version 1.0, Vendor Version 0
Device Description: U.S. Robotics 56K FAX INT
Logical Device ID: USR3030 0x30307256 #0
TAG Start DF
Good Configuration
I/O Range 0x2f8 .. 0x2f8, alignment 0x8, len 0x8
[16-bit addr]
IRQ: 3 5 7 - only one type (true/edge)
TAG Start DF
Acceptable Configuration
I/O Range 0x3f8 .. 0x3f8, alignment 0x8, len 0x8
[16-bit addr]
IRQ: 2 3 4 5 7 - only one type (true/edge)
TAG Start DF
Acceptable Configuration
I/O Range 0x3e8 .. 0x3e8, alignment 0x8, len 0x8
[16-bit addr]
IRQ: 2 3 4 5 7 - only one type (true/edge)
TAG Start DF
Acceptable Configuration
I/O Range 0x2e8 .. 0x2e8, alignment 0x8, len 0x8
[16-bit addr]
IRQ: 2 3 4 5 7 - only one type (true/edge)
TAG Start DF
Acceptable Configuration
TAG End DF
End Tag
Successfully got 17 resources, 1 logical fdevs
-- card select # 0x0002
CSN USR3030 (0x30307256), Serial Number 0xaebc8fb4
Logical device #0
IO: 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000
IRQ 0 0
DMA 4 4
IO range check 0x00 activate 0x01
----- Original Message -----
From: "Adam" <bsdx@looksharp.net>
To: "dave" <dmehler22@earthlink.net>
Cc: <freebsd-hardware@FreeBSD.ORG>
Sent: Thursday, July 06, 2000 7:28 PM
Subject: Re: configuring a pnp modem.
> I had one working in 2.2.x or 3.x a few years ago, but since the pnp
> system is different now you'll probably have to glean some identification
> info from the pnpinfo command and stuff it in the sio driver so it
> recognizes and configures the modem. If you cant handle all this, at
> least post back with the pnpinfo output so someone else can give it a
> shot. Good luck!
>
> On Fri, 7 Jul 2000, dave wrote:
>
> >Hello,
> > Has anyone got a plug and play modem, not a winmodem, working under
fbsd 4.0? If so, please tell me how as I have been unable to get mine
working.
> >Thanks.
> >Dave.
> >
> >
>
>
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-hardware" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?000801bfe88b$db78f9e0$0200a8c0>