Date: Mon, 22 Dec 1997 10:15:12 -0800 (PST) From: Archie Cobbs <archie@whistle.com> To: HaiderRo@linz.vai.co.at (Haider Roland VAI/TAW2) Cc: freebsd-hardware@FreeBSD.ORG Subject: Re: network adapter jumper settings ? Message-ID: <199712221815.KAA25241@bubba.whistle.com> In-Reply-To: <70D6A3FCD8F1CF11A86508002BE74D7938BA89@mail1.vai.co.at> from Haider Roland VAI/TAW2 at "Dec 22, 97 12:25:07 pm"
next in thread | previous in thread | raw e-mail | index | archive | help
Haider Roland VAI/TAW2 writes:
> It's a 16bit ISA card with a socket for a boot-ROM, so I assume it's a
> NE2000.
Yep..
> If somebody can identify the card with the following description any
> help with the jumper settings would be appreciated.
>
> Connectors: BNC and 15pin AUI
> Chip: W89C901
>
> ws
> JP1 XX
> XX JP2
> JP3 XXXXXXX
> XXXXXXX
> XXXXXXX
> JP4 JP5 JP6
> XXXX|XXXXX|X JP7 IRQ
> XXXX|XXXXX|X XXXXXXXXXX
> XXXX|XXXXX|X XXXXXXXXXX
> I/O MEM ROM 15 2
>
> except JP7 I'm not shure what to set.
My guess:
Leave ROM off, MEM doesn't matter, I/O is your base address.. and
0x300 is sure to be one of them. You can either
(a) Try all jumper combinations with kernel set to 0x300
(b) Try a bunch of kernel settings (boot -c) to see if you
can find the card.
If you do (a), it looks like it will only take <= 16 attempts.. :-)
-Archie
___________________________________________________________________________
Archie Cobbs * Whistle Communications, Inc. * http://www.whistle.com
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?199712221815.KAA25241>