Date: Mon, 22 Dec 1997 10:15:12 -0800 (PST) From: Archie Cobbs <archie@whistle.com> To: HaiderRo@linz.vai.co.at (Haider Roland VAI/TAW2) Cc: freebsd-hardware@FreeBSD.ORG Subject: Re: network adapter jumper settings ? Message-ID: <199712221815.KAA25241@bubba.whistle.com> In-Reply-To: <70D6A3FCD8F1CF11A86508002BE74D7938BA89@mail1.vai.co.at> from Haider Roland VAI/TAW2 at "Dec 22, 97 12:25:07 pm"
next in thread | previous in thread | raw e-mail | index | archive | help
Haider Roland VAI/TAW2 writes: > It's a 16bit ISA card with a socket for a boot-ROM, so I assume it's a > NE2000. Yep.. > If somebody can identify the card with the following description any > help with the jumper settings would be appreciated. > > Connectors: BNC and 15pin AUI > Chip: W89C901 > > ws > JP1 XX > XX JP2 > JP3 XXXXXXX > XXXXXXX > XXXXXXX > JP4 JP5 JP6 > XXXX|XXXXX|X JP7 IRQ > XXXX|XXXXX|X XXXXXXXXXX > XXXX|XXXXX|X XXXXXXXXXX > I/O MEM ROM 15 2 > > except JP7 I'm not shure what to set. My guess: Leave ROM off, MEM doesn't matter, I/O is your base address.. and 0x300 is sure to be one of them. You can either (a) Try all jumper combinations with kernel set to 0x300 (b) Try a bunch of kernel settings (boot -c) to see if you can find the card. If you do (a), it looks like it will only take <= 16 attempts.. :-) -Archie ___________________________________________________________________________ Archie Cobbs * Whistle Communications, Inc. * http://www.whistle.com
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?199712221815.KAA25241>