Date: Mon, 04 Mar 2002 22:57:24 -0500 From: Bryan Liesner <bleez@bellatlantic.net> To: sos@freebsd.dk Cc: stable@FreeBSD.ORG Subject: Re: Request for testers of new ATA driver patches Message-ID: <3C844224.1040800@bellatlantic.net> References: <200203042201.g24M1nU36308@freebsd.dk>
next in thread | previous in thread | raw e-mail | index | archive | help
This is a multi-part message in MIME format. --------------060709000209030500000102 Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 8bit On 03/04/2002 05:01 PM, Søren Schmidt wrote: > I'm currently backporting the -current ATA driver to -stable, and > I need some testers as to cover as much HW as possible. > The patches are new, but at least they dont panic here :) > They include atacontrol (for hotswapping, RAID control etc) and > burncd with all -current features. > > ftp://ftp.freebsd.dk/pub/ATA/ata-diff-stable-2002-0304.gz Works fine here on an Asus A7V266-E w/ Promise Ultra 100 card for the hard drives. (addin card, not builtin). I burned an audio CD with the DAO feature. Also did a buildworld with the new kernel and the disk is still intact :) Verbose dmesg attached. ad0: 19595MB <QUANTUM FIREBALLP AS20.5> [39813/16/63] at ata2-master UDMA100 ad1: 8693MB <WDC AC29100D> [17662/16/63] at ata3-master UDMA66 acd0: CDROM <CD-ROM 48X/AKU> at ata0-master PIO4 acd1: CD-RW <SONY CD-RW CRX175A1> at ata1-master UDMA33 ast0: <HP COLORADO 8GB/2.050000> tape device - NO DRIVER! My tape has been acting flaky lately, but not because of the patches. I get the NO DRIVER! intermittently - probably time to toss it. -- ========================================================== = Bryan D. Liesner LeezSoft Communications, Inc. = = A subsidiary of LeezSoft Inc. = = bleez@bellatlantic.net Home of the Gipper = ========================================================== --------------060709000209030500000102 Content-Type: text/plain; name="dmesg.ata_patch" Content-Transfer-Encoding: 7bit Content-Disposition: inline; filename="dmesg.ata_patch" Copyright (c) 1992-2002 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 4.5-STABLE #0: Mon Mar 4 21:11:23 EST 2002 bryan@gravy.kishka.net:/usr/obj/usr/src/sys/GRAVY Calibrating clock(s) ... TSC clock: 1544536673 Hz, i8254 clock: 1193208 Hz Timecounter "i8254" frequency 1193208 Hz CPU: AMD Athlon(TM) XP1800+ (1544.54-MHz 686-class CPU) Origin = "AuthenticAMD" Id = 0x662 Stepping = 2 Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE> AMD Features=0xc0480000<<b19>,AMIE,DSP,3DNow!> Data TLB: 32 entries, fully associative Instruction TLB: 16 entries, fully associative L1 data cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative L1 instruction cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative L2 internal cache: 256 kbytes, 64 bytes/line, 1 lines/tag, 8-way associative real memory = 268353536 (262064K bytes) Physical memory chunk(s): 0x00001000 - 0x0009dfff, 643072 bytes (157 pages) 0x0035a000 - 0x0ffe3fff, 264806400 bytes (64650 pages) avail memory = 257892352 (251848K bytes) bios32: Found BIOS32 Service Directory header at 0xc00f1460 bios32: Entry = 0xf0be0 (c00f0be0) Rev = 0 Len = 1 pcibios: PCI BIOS entry at 0xde0 pnpbios: Found PnP BIOS data at 0xc00fbd80 pnpbios: Entry = f0000:bdb0 Rev = 1.0 pnpbios: OEM ID cd041 Other BIOS signatures found: ACPI: 000f6d20 Preloaded elf kernel "kernel" at 0xc0333000. Preloaded elf module "warp_saver.ko" at 0xc03330a8. netsmb_dev: loaded Pentium Pro MTRR support enabled pci_open(1): mode 1 addr port (0x0cf8) is 0x80000060 pci_open(1a): mode1res=0x80000000 (0x80000000) pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=30991106) Using $PIR table, 10 entries at 0xc00f1390 apm0: <APM BIOS> on motherboard apm: found APM BIOS v1.2, connected at v1.2 npx0: <math processor> on motherboard npx0: INT 16 interface pcib0: <Host to PCI bridge> on motherboard found-> vendor=0x1106, dev=0x3099, revid=0x00 class=06-00-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 map[10]: type 1, range 32, base f8000000, size 26 found-> vendor=0x1106, dev=0xb099, revid=0x00 class=06-04-00, hdrtype=0x01, mfdev=0 subordinatebus=1 secondarybus=1 found-> vendor=0x1274, dev=0x1371, revid=0x08 class=04-01-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 intpin=a, irq=11 map[10]: type 1, range 32, base 0000d800, size 6 found-> vendor=0x105a, dev=0x4d30, revid=0x02 class=01-80-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 intpin=a, irq=10 map[10]: type 1, range 32, base 0000d400, size 3 map[14]: type 1, range 32, base 0000d000, size 2 map[18]: type 1, range 32, base 0000b800, size 3 map[1c]: type 1, range 32, base 0000b400, size 2 map[20]: type 1, range 32, base 0000b000, size 6 map[24]: type 1, range 32, base ef800000, size 17 found-> vendor=0x10d9, dev=0x0531, revid=0x25 class=02-00-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 intpin=a, irq=5 map[10]: type 1, range 32, base 0000a800, size 8 map[14]: type 1, range 32, base ef000000, size 8 found-> vendor=0x1106, dev=0x3074, revid=0x00 class=06-01-00, hdrtype=0x00, mfdev=1 subordinatebus=0 secondarybus=0 found-> vendor=0x1106, dev=0x0571, revid=0x06 class=01-01-8a, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 intpin=a, irq=0 map[20]: type 1, range 32, base 0000a400, size 4 found-> vendor=0x1106, dev=0x3038, revid=0x1b class=0c-03-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 intpin=d, irq=5 map[20]: type 1, range 32, base 0000a000, size 5 found-> vendor=0x1106, dev=0x3038, revid=0x1b class=0c-03-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 intpin=d, irq=5 map[20]: type 1, range 32, base 00009800, size 5 found-> vendor=0x1106, dev=0x3038, revid=0x1b class=0c-03-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 intpin=d, irq=5 map[20]: type 1, range 32, base 00009400, size 5 pci0: <PCI bus> on pcib0 pcib1: <PCI to PCI bridge (vendor=1106 device=b099)> at device 1.0 on pci0 found-> vendor=0x5333, dev=0x8a13, revid=0x02 class=03-00-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 map[10]: type 1, range 32, base f0000000, size 26 pci1: <PCI bus> on pcib1 pci1: <S3 Trio3D/2X graphics accelerator> (vendor=0x5333, dev=0x8a13) at 0.0 pcm0: <AudioPCI ES1373-8> port 0xd800-0xd83f irq 11 at device 14.0 on pci0 pcm0: ac97 codec id 0x43525913 (Cirrus Logic CS4297A) pcm0: ac97 codec features headphone, 20 bit DAC, 18 bit ADC, 6 bit master volume, Crystal Semi 3D Stereo Enhancement pcm0: ac97 primary codec extended features AMAP pcm: setmap f86e000, 1000; 0xc11ba000 -> f86e000 pcm: setmap f870000, 1000; 0xc11bc000 -> f870000 atapci0: <Promise ATA100 controller> port 0xb000-0xb03f,0xb400-0xb403,0xb800-0xb807,0xd000-0xd003,0xd400-0xd407 mem 0xef800000-0xef81ffff irq 10 at device 15.0 on pci0 ata-: ata2 exists, using next available unit number ata2: iobase=0xd400 altiobase=0xd002 bmaddr=0xb000 ata2: mask=03 ostat0=50 ostat2=00 ata2-master: ATAPI 00 00 ata2-slave: ATAPI 00 00 ata2: mask=03 stat0=50 stat1=00 ata2-master: ATA 01 a5 ata2: devices=01 ata2: at 0xd400 on atapci0 ata3: iobase=0xb800 altiobase=0xb402 bmaddr=0xb008 ata3: mask=03 ostat0=50 ostat2=00 ata3-master: ATAPI 00 00 ata3-slave: ATAPI 00 00 ata3: mask=03 stat0=50 stat1=00 ata3-master: ATA 01 a5 ata3: devices=01 ata3: at 0xb800 on atapci0 using shared irq10. dc0: <Macronix 98715AEC-C 10/100BaseTX> port 0xa800-0xa8ff mem 0xef000000-0xef0000ff irq 5 at device 16.0 on pci0 dc0: Ethernet address: 00:80:c6:f9:5b:0d miibus0: <MII bus> on dc0 dcphy0: <Intel 21143 NWAY media interface> on miibus0 dcphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto bpf: dc0 attached isab0: <PCI to ISA bridge (vendor=1106 device=3074)> at device 17.0 on pci0 isa0: <ISA bus> on isab0 atapci1: <VIA 8233 ATA100 controller> port 0xa400-0xa40f irq 0 at device 17.1 on pci0 ata0: iobase=0x01f0 altiobase=0x03f6 bmaddr=0xa400 ata0: mask=03 ostat0=50 ostat2=51 ata0-master: ATAPI 14 eb ata0-slave: ATAPI 7f 7f ata0: mask=03 stat0=10 stat1=00 ata0-slave: ATA 01 7f ata0: devices=04 ata0: at 0x1f0 irq 14 on atapci1 ata1: iobase=0x0170 altiobase=0x0376 bmaddr=0xa408 ata1: mask=03 ostat0=50 ostat2=50 ata1-master: ATAPI 14 eb ata1-slave: ATAPI 14 eb ata1: mask=03 stat0=00 stat1=00 ata1: devices=0c ata1: at 0x170 irq 15 on atapci1 uhci0: <VIA 83C572 USB controller> port 0xa000-0xa01f irq 5 at device 17.2 on pci0 using shared irq5. usb0: <VIA 83C572 USB controller> on uhci0 usb0: USB revision 1.0 uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered ums0: Logitech Trackball, rev 1.10/2.20, addr 2, iclass 3/1 ums0: 3 buttons and Z dir. uhci1: <VIA 83C572 USB controller> port 0x9800-0x981f irq 5 at device 17.3 on pci0 usb1: <VIA 83C572 USB controller> on uhci1 usb1: USB revision 1.0 uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered uhci2: <VIA 83C572 USB controller> port 0x9400-0x941f irq 5 at device 17.4 on pci0 usb2: <VIA 83C572 USB controller> on uhci2 usb2: USB revision 1.0 uhub2: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub2: 2 ports with 2 removable, self powered Trying Read_Port at 203 Trying Read_Port at 243 Trying Read_Port at 283 Trying Read_Port at 2c3 Trying Read_Port at 303 Trying Read_Port at 343 Trying Read_Port at 383 Trying Read_Port at 3c3 isa_probe_children: disabling PnP devices isa_probe_children: probing non-PnP devices orm0: <Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xcbfff,0xcc000-0xcdfff on isa0 fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 fdc0: FIFO enabled, 8 bytes threshold fd0: <1440-KB 3.5" drive> on fdc0 drive 0 atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 atkbd: the current kbd controller command byte 0047 atkbd: keyboard ID 0x41ab (2) kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000 ppc0: parallel port found at 0x378 ppc0: using extended I/O port range ppc0: ECP SPP ECP+EPP SPP ppc0: <Parallel port> at port 0x378-0x37f irq 7 flags 0xf on isa0 ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in ECP+EPP mode (EPP 1.9) ppc0: FIFO with 16/16/9 bytes threshold ppbus0: IEEE1284 device found /NIBBLE/NIBBLE_ID/Extensibility Link Probing for PnP devices on ppbus0: ppbus0: <Canon BJC-1000/1.21> PRINTER BJL,BJRaster,BSCC,TXT01 lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 fb0: vga0, vga, type:VGA (5), flags:0x7007f fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000 fb0: init mode:24, bios mode:3, current mode:24 fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k VGA parameters upon power-up 50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0d 0e 00 00 07 80 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff VGA parameters in BIOS for mode 24 50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff EGA/VGA parameters to be used for mode 24 50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff sc0: <System console> on isa0 sc0: VGA <16 virtual consoles, flags=0x200> sc0: fb0, kbd0, terminal emulator: sc (syscons terminal) joy0 at port 0x201 on isa0 sio0: irq maps: 0x41 0x51 0x41 0x41 sio0 at port 0x3f8-0x3ff irq 4 on isa0 sio0: type 16550A isa_probe_children: probing PnP devices BIOS Geometries: 0:03fefe3f 0..1022=1023 cylinders, 0..254=255 heads, 1..63=63 sectors 1:03fefe3f 0..1022=1023 cylinders, 0..254=255 heads, 1..63=63 sectors 0 accounted for Device configuration finished. splash: image decoder found: warp_saver bpf: lo0 attached Linux ELF exec handler installed ad0: success setting UDMA5 on Promise chip Creating DISK ad0 ar: Promise check1 failed ad0: <QUANTUM FIREBALLP AS20.5/A1Y.1500> ATA-5 disk at ata2-master ad0: 19595MB (40132503 sectors), 39813 C, 16 H, 63 S, 512 B ad0: 16 secs/int, 1 depth queue, UDMA100 ad0: piomode=4 dmamode=2 udmamode=5 cblid=1 ad1: success setting UDMA4 on Promise chip Creating DISK ad1 ar: Promise check1 failed ad1: <WDC AC29100D/J74OA30K> ATA-4 disk at ata3-master ad1: 8693MB (17803440 sectors), 17662 C, 16 H, 63 S, 512 B ad1: 16 secs/int, 1 depth queue, UDMA66 ad1: piomode=4 dmamode=2 udmamode=4 cblid=1 ata0-master: piomode=4 dmamode=2 udmamode=-1 dmaflag=1 ata0-master: success setting PIO4 on generic chip acd0: <CD-ROM 48X/AKU/T30> CDROM drive at ata0 as master acd0: 128KB buffer, PIO4 acd0: Reads: CD-DA stream acd0: Writes: acd0: Audio: play, 255 volume levels acd0: Mechanism: ejectable tray, unlocked acd0: Medium: CD-ROM 120mm audio disc ata1-master: piomode=4 dmamode=2 udmamode=2 dmaflag=1 ata1-master: success setting UDMA2 on VIA chip acd1: <SONY CD-RW CRX175A1/5YS2> CD-RW drive at ata1 as master acd1: read 6875KB/s (32026KB/s) write 172KB/s (4125KB/s), 2048KB buffer, UDMA33 acd1: Reads: CD-R, CD-RW, CD-DA stream, packet acd1: Writes: CD-R, CD-RW, test write, burnproof acd1: Audio: play, 255 volume levels acd1: Mechanism: ejectable tray, unlocked acd1: Medium: no/blank disc ata1-slave: piomode=4 dmamode=2 udmamode=-1 dmaflag=1 ata1-slave: success setting PIO4 on generic chip ast0: <HP COLORADO 8GB/2.050000> tape device - NO DRIVER! Mounting root from ufs:/dev/ad0s1a ad0s1: type 0xa5, start 0, end = 40132502, size 40132503 : OK start_init: trying /sbin/init ad1s1: type 0xa5, start 0, end = 17803439, size 17803440 : OK ad1s1: type 0xa5, start 0, end = 17803439, size 17803440 : OK --------------060709000209030500000102-- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-stable" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?3C844224.1040800>