Date: Thu, 16 Sep 2010 02:44:23 +0000 (UTC) From: Alexander Motin <mav@FreeBSD.org> To: src-committers@freebsd.org, svn-src-all@freebsd.org, svn-src-stable@freebsd.org, svn-src-stable-8@freebsd.org Subject: svn commit: r212719 - in stable/8/sys/dev/ata: . chipsets Message-ID: <201009160244.o8G2iNtI058607@svn.freebsd.org>
next in thread | raw e-mail | index | archive | help
Author: mav Date: Thu Sep 16 02:44:23 2010 New Revision: 212719 URL: http://svn.freebsd.org/changeset/base/212719 Log: MFC r212145: SATA1.x SiliconImage controllers on power-on reset TFD Status register into value 0xff. On hot-plug this value confuses ata_generic_reset() device presence detection logic. As soon as we already know drive presence from SATA hard reset, hint ata_generic_reset() to wait for device signature until success or full timeout. Modified: stable/8/sys/dev/ata/ata-all.h stable/8/sys/dev/ata/ata-lowlevel.c stable/8/sys/dev/ata/chipsets/ata-siliconimage.c Directory Properties: stable/8/sys/ (props changed) stable/8/sys/amd64/include/xen/ (props changed) stable/8/sys/cddl/contrib/opensolaris/ (props changed) stable/8/sys/contrib/dev/acpica/ (props changed) stable/8/sys/contrib/pf/ (props changed) stable/8/sys/dev/xen/xenpci/ (props changed) Modified: stable/8/sys/dev/ata/ata-all.h ============================================================================== --- stable/8/sys/dev/ata/ata-all.h Thu Sep 16 02:42:52 2010 (r212718) +++ stable/8/sys/dev/ata/ata-all.h Thu Sep 16 02:44:23 2010 (r212719) @@ -565,6 +565,7 @@ struct ata_channel { #define ATA_NO_ATAPI_DMA 0x40 #define ATA_SATA 0x80 #define ATA_DMA_BEFORE_CMD 0x100 +#define ATA_KNOWN_PRESENCE 0x200 int pm_level; /* power management level */ int devices; /* what is present */ Modified: stable/8/sys/dev/ata/ata-lowlevel.c ============================================================================== --- stable/8/sys/dev/ata/ata-lowlevel.c Thu Sep 16 02:42:52 2010 (r212718) +++ stable/8/sys/dev/ata/ata-lowlevel.c Thu Sep 16 02:44:23 2010 (r212719) @@ -474,7 +474,8 @@ ata_generic_reset(device_t dev) ATA_IDX_OUTB(ch, ATA_DRIVE, ATA_D_IBM | ATA_D_LBA | ATA_DEV(ATA_MASTER)); DELAY(10); ostat0 = ATA_IDX_INB(ch, ATA_STATUS); - if ((ostat0 & 0xf8) != 0xf8 && ostat0 != 0xa5) { + if (((ostat0 & 0xf8) != 0xf8 || (ch->flags & ATA_KNOWN_PRESENCE)) && + ostat0 != 0xa5) { stat0 = ATA_S_BUSY; mask |= 0x01; } @@ -484,7 +485,8 @@ ata_generic_reset(device_t dev) ATA_IDX_OUTB(ch, ATA_DRIVE, ATA_D_IBM | ATA_D_LBA | ATA_DEV(ATA_SLAVE)); DELAY(10); ostat1 = ATA_IDX_INB(ch, ATA_STATUS); - if ((ostat1 & 0xf8) != 0xf8 && ostat1 != 0xa5) { + if (((ostat1 & 0xf8) != 0xf8 || (ch->flags & ATA_KNOWN_PRESENCE)) && + ostat1 != 0xa5) { stat1 = ATA_S_BUSY; mask |= 0x02; } @@ -570,22 +572,16 @@ ata_generic_reset(device_t dev) } } - if (mask == 0x00) /* nothing to wait for */ - break; - if (mask == 0x01) /* wait for master only */ - if (!(stat0 & ATA_S_BUSY) || (stat0 == 0xff && timeout > 10)) - break; - if (mask == 0x02) /* wait for slave only */ - if (!(stat1 & ATA_S_BUSY) || (stat1 == 0xff && timeout > 10)) - break; - if (mask == 0x03) { /* wait for both master & slave */ - if (!(stat0 & ATA_S_BUSY) && !(stat1 & ATA_S_BUSY)) - break; - if ((stat0 == 0xff) && (timeout > 20)) - mask &= ~0x01; - if ((stat1 == 0xff) && (timeout > 20)) - mask &= ~0x02; + if ((ch->flags & ATA_KNOWN_PRESENCE) == 0 && + timeout > ((mask == 0x03) ? 20 : 10)) { + if ((mask & 0x01) && stat0 == 0xff) + mask &= ~0x01; + if ((mask & 0x02) && stat1 == 0xff) + mask &= ~0x02; } + if (((mask & 0x01) == 0 || !(stat0 & ATA_S_BUSY)) && + ((mask & 0x02) == 0 || !(stat1 & ATA_S_BUSY))) + break; ata_udelay(100000); } Modified: stable/8/sys/dev/ata/chipsets/ata-siliconimage.c ============================================================================== --- stable/8/sys/dev/ata/chipsets/ata-siliconimage.c Thu Sep 16 02:42:52 2010 (r212718) +++ stable/8/sys/dev/ata/chipsets/ata-siliconimage.c Thu Sep 16 02:44:23 2010 (r212719) @@ -316,6 +316,7 @@ ata_sii_ch_attach(device_t dev) ch->r_io[ATA_SCONTROL].offset = 0x100 + (unit01 << 7) + (unit10 << 8); ch->flags |= ATA_NO_SLAVE; ch->flags |= ATA_SATA; + ch->flags |= ATA_KNOWN_PRESENCE; /* enable PHY state change interrupt */ ATA_OUTL(ctlr->r_res2, 0x148 + (unit01 << 7) + (unit10 << 8),(1 << 16));
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?201009160244.o8G2iNtI058607>