Date: Mon, 9 Feb 1998 10:35:31 -0500 (EST) From: "Neil T. Mathison" <mathison@sara.cpb.org> To: Ron Rosson <insane@oneinsane.net> Cc: freebsd-hardware@FreeBSD.ORG Subject: Re: DEC TLZ06 4mm DAT Message-ID: <Pine.OSF.3.96.980209100739.20696A-100000@sara.cpb.org> In-Reply-To: <3.0.5.32.19980208092308.035c83a0@the.oneinsane.net>
next in thread | previous in thread | raw e-mail | index | archive | help
On Sun, 8 Feb 1998, Ron Rosson wrote:
> I am looking for a tech sheet, jumper configuration sheet
> and anything that is useful for me to troubleshoot this drive.
> At the moment it makes tapes but when I do a tar tvf It fails.
> I have been told it is power connectors but at this point in
> time I dont have time to break this box down. So when I do get
> the time to work on it, I would enjoy in any tech, configuration,
> etc sheets on this drive.
>
> TIA
> Ron
> P.S. Running FreeBSD-2.2.5-STABLE
>
No compression Compression
TLZ06-CA (90 m) 2.0 GB 4.0 GB
90 meter tapes are the maximum.
Dip switch setting
1 SCSI ID 1
2 SCSI ID 2
3 SCSI ID 3
4 SCSI-1 or SCSI-2 (on is SCSI-2)
5 Parity Enable (in is enabled)
6 Compression Enable/Disbale (on is disabled)
7 off (reserved for future use)
8 self-test (on is enabled)
The parameters that should be used when running dump
noncompressed
density = 61000 effective tape length (with 90 meter tape) = 57440
dump 0ds 61000 57440 ...
compressed
density = 61000 effective tape length (with 90 meter tape) =
57740 x 2
dump 0ds 61000 114880 ...
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe hardware" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.OSF.3.96.980209100739.20696A-100000>