Date: Wed, 25 Jan 2012 08:51:00 +0100 From: =?utf-8?Q?Michal_Van=C4=8Do?= <mvanco@di-vision.sk> To: Adrian Chadd <adrian@freebsd.org> Cc: freebsd-wireless@freebsd.org, freebsd-stable@freebsd.org Subject: Re: ath0: device timeout on 9.0-STABLE Message-ID: <A08F9265-8CF7-4180-BB19-BDACFDC8AE3E@di-vision.sk> In-Reply-To: <CAJ-Vmon23eKpj6kUx5L50CPsP5KWayeZM68Jr5Qo2ynC8mYOnQ@mail.gmail.com> References: <43606099-9A1E-4B56-87FB-FB1CD23E9A8F@di-vision.sk> <CAJ-Vmon23eKpj6kUx5L50CPsP5KWayeZM68Jr5Qo2ynC8mYOnQ@mail.gmail.com>
next in thread | previous in thread | raw e-mail | index | archive | help
Adrian,
believe or not =E2=80=A6 it simply started to work. I just left my =
thinkpad turned off during the night and now when I booted, almost =
everything works as expected:
# ifconfig wlan0
wlan0: flags=3D8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu =
1500
ether 00:19:7e:52:1c:c4
inet 192.168.0.17 netmask 0xffffff00 broadcast 192.168.0.255
nd6 options=3D29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
media: IEEE 802.11 Wireless Ethernet OFDM/48Mbps mode 11g
status: associated
ssid XXX channel 9 (2452 MHz 11g) bssid 10:9a:dd:88:2a:5d
regdomain ETSI2 country SK indoor ecm authmode WPA2/802.11i
privacy ON deftxkey UNDEF AES-CCM 3:128-bit txpower 30 bmiss 7
scanvalid 450 bgscan bgscanintvl 300 bgscanidle 250 roam:rssi 7
roam:rate 5 protmode CTS wme burst roaming MANUAL
# /usr/src/tools/tools/ath/athstats/athstats -i ath0
4228 data frames received
818 data frames transmit
3 tx frames with an alternate rate
126 long on-chip tx retries
29480 mib overflow interrupts
24M current transmit rate
730 tx frames with short preamble
210 rx failed 'cuz of bad CRC
18 rx failed 'cuz of PHY err
18 CCK restart
10 periodic calibrations
-0/+0 TDMA slot adjust (usecs, smoothed)
37 rssi of last ack
37 avg recv rssi
-96 rx noise floor
90 tx frames through raw api
1 spur immunity level
1 first step level
9 ANI increased spur immunity
2 ANI decrease spur immunity
103 ANI enabled OFDM weak signal detect
4 ANI disabled OFDM weak signal detect
102 ANI disabled CCK weak signal threshold
3 ANI increased first step level
7392282 cumulative OFDM phy error count
34526 cumulative CCK phy error count
20 ANI forced listen time to zero
126 missing ACK's
291 bad FCS
2928 beacons received
39 average rssi (beacons only)
37 average rssi (all rx'd frames)
37 average rssi (ACKs only)
Antenna profile:
[0] tx 817 rx 65
[1] tx 0 rx 4163
I say "almost" because that small WiFi-LED doesn't blink as it should. =
Is there any way to fix this? I see these sysctls:
dev.ath.0.softled: 0
dev.ath.0.ledpin: 0
dev.ath.0.ledon: 0
dev.ath.0.ledidle: 2700
but I'm lost with them :)
regards
michal
On 25.1.2012, at 4:46, Adrian Chadd wrote:
> Sure, can you please:
>=20
> * compile with the following options:
>=20
> options ATH_DEBUG
> options AH_DEBUG
> options ATH_DIAGAPI
>=20
> * compile /usr/src/sys/tools/tools/ath/athstats/
>=20
> * run athstats -i ath0 and email them to me + =
freebsd-wireless@freebsd.org
>=20
> Thanks!
>=20
>=20
>=20
> Adrian
>=20
>=20
> On 24 January 2012 04:01, Michal Van=C4=8Do <mvanco@di-vision.sk> =
wrote:
> Hi there,
>=20
> I've installed 9.0-STABLE (also tried on 9.0-RELEASE) on my Thinkpad =
T60 and I'm not able to use WiFi. Kernel is GENERIC.
>=20
> pciconf -lv:
> ath0@pci0:3:0:0: class=3D0x028000 card=3D0x0033168c =
chip=3D0x0024168c rev=3D0x01 hdr=3D0x00
> vendor =3D 'Atheros Communications Inc.'
> device =3D 'AR5008 Wireless Network Adapter'
> class =3D network
>=20
> relevant part of rc.conf:
> wlans_ath0=3D"wlan0"
> create_args_wlan0=3D"country SK"
> ifconfig_wlan0=3D"WPA DHCP"
>=20
> and wpa_supplicant.conf:
> ctrl_interface=3D/var/run/wpa_supplicant
>=20
> network=3D{
> ssid=3D"XXX"
> psk=3D"XXX"
> }
>=20
> dmesg just fills with "ath0: device timeout" messages and wifi just =
doesn't work.
>=20
> any clue?
>=20
> regards
> michal
>=20
> _______________________________________________
> freebsd-stable@freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-stable
> To unsubscribe, send any mail to =
"freebsd-stable-unsubscribe@freebsd.org"
>=20
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?A08F9265-8CF7-4180-BB19-BDACFDC8AE3E>