Date: Wed, 14 Sep 2005 22:54:44 +0200 From: "Roger O. Svenning" <roger@audioweb.no> To: "=?iso-8859-1?Q?'S=F8ren_Schmidt'?=" <sos@FreeBSD.ORG> Cc: freebsd-hackers@FreeBSD.ORG Subject: RE: Intel 6300ESB SATA and TIMEOUT - WRITE_DMA Message-ID: <000a01c5b96e$8a714f70$6401a8c0@aw001> In-Reply-To: <9CF43267-5DAA-4080-9616-B93D484DC90D@FreeBSD.ORG>
next in thread | previous in thread | raw e-mail | index | archive | help
> On 14/09/2005, at 17:36, Roger O. Svenning wrote:
>=20
> >>
> >> You should try 6.0-beta4 as that contains the solution to whatever
> >> ATA problems you might have on 5.x. Let me know how that goes.
> >>
> >> S=F8ren Schmidt
> >> sos@FreeBSD.org
> >
> > cvsup running as I'm writing this
> >
> > Would I waste my time trying to enable raid on this controller?
>=20
> Depends, its software RAID, so support relies on ataraid supporting
> the on-disk metadata format, but you can try to setup a RAID on the
> disks, it will get picked up if known..
>=20
> S=F8ren Schmidt
> sos@FreeBSD.org
Ok, 6.0-beta4 built and installed successfully.
I'm sorry to report I still get the timeouts.
On the other hand it does recognize the (old) raid arrays now.
Not sure where to go from here?
dmesg extract:
FreeBSD 6.0-BETA4 #1: Wed Sep 14 21:16:19 UTC 2005
root@nwn.patnix.nl:/usr/obj/usr/src/sys/GENERIC
WARNING: WITNESS option enabled, expect reduced performance.
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Pentium(R) 4 CPU 3.00GHz (2994.90-MHz 686-class CPU)
....
atapci0: <Intel 6300ESB SATA150 controller> port
0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xf000-0xf00f irq 18 at device 31.2
on pci0
atapci0: failed to enable memory mapping!
....
acd0: DVDROM <TOSHIBA ODD-DVD SD-C2712/1031> at ata0-slave UDMA33
ad2: 117800MB <HDS722512VLSA80 V33OA63A> at ata1-master SATA150
ad3: 117800MB <HDS722512VLSA80 V33OA63A> at ata1-slave SATA150
ad3: Intel calc=3D1a354950 meta=3D8d1aa4a8
ar0: 117800MB <Adaptec HostRAID RAID1> status: BROKEN
ar0: disk0 DOWN no device found for this subdisk
ar0: disk1 DOWN no device found for this subdisk
ar1: WARNING - mirror protection lost. RAID1 array in DEGRADED mode
ar1: 117799MB <Intel MatrixRAID RAID1> status: DEGRADED
ar1: disk0 DOWN no device found for this subdisk
ar1: disk1 READY (mirror) using ad3 at ata1-slave
....
ad2: TIMEOUT - WRITE_DMA retrying (1 retry left) LBA=3D174371823
ad2: TIMEOUT - READ_DMA retrying (1 retry left) LBA=3D174373071
ad2: TIMEOUT - WRITE_DMA retrying (1 retry left) LBA=3D174750735
Regards
Roger O. Svenning
Bod=F8 - Norway
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?000a01c5b96e$8a714f70$6401a8c0>