Date: Tue, 5 May 2020 19:02:50 -0400 From: Aryeh Friedman <aryeh.friedman@gmail.com> To: Brandon helsley <brandon.helsley@hotmail.com> Cc: "freebsd-virtualization@freebsd.org" <freebsd-virtualization@freebsd.org>, Robert Crowston <crowston@protonmail.com> Subject: Re: Bhyve help Message-ID: <CAGBxaXnbwWeKSRx8x98ksD0J9TVn3D_JGCY_mUSJ%2B-MTer_A7Q@mail.gmail.com> In-Reply-To: <CY4PR19MB1655C7497E958ABE2AC7A89FF9A70@CY4PR19MB1655.namprd19.prod.outlook.com> References: <CY4PR19MB16555756D3B5AF8F61C9F885F9A70@CY4PR19MB1655.namprd19.prod.outlook.com> <1NVr2edzkfBDrm41NUc1i3czldPuT_tn_7Y1mlj7ef_uTSXRpKo1BV5wvWTr9F8K14KqN09d5Sy8BjnnaJ9EsAMTQ6rvJl1IiD2TNWcTf2Y=@protonmail.com> <CY4PR19MB1655E3D5D5FE410243F3F55CF9A70@CY4PR19MB1655.namprd19.prod.outlook.com> <CAGBxaXmg0V-X4-Y3gYi9=OXfoBVnbz8_isKbuT3GMCBZJhg5Nw@mail.gmail.com> <CY4PR19MB1655C2BBA2194A270F37F736F9A70@CY4PR19MB1655.namprd19.prod.outlook.com> <CAGBxaX=Lk_8AkW-UKm24=3u%2Be7vtLjvjuaRdyK7=cdbU3KYy1w@mail.gmail.com> <CY4PR19MB1655C7497E958ABE2AC7A89FF9A70@CY4PR19MB1655.namprd19.prod.outlook.com>
next in thread | previous in thread | raw e-mail | index | archive | help
When setting up a VM you also need to add the tap it is on to the bridge as well your physical NIC On Tue, May 5, 2020 at 6:28 PM Brandon helsley <brandon.helsley@hotmail.com= > wrote: > Bhyve gets me to Network installation: "some installation files were not > found on the boot volume. The next few screens will allow you to configur= e > networking so that they can be downloaded from the internet." This happen= s > after system components. > > Sent from Outlook Mobile <https://aka.ms/blhgte>; > ------------------------------ > *From:* Aryeh Friedman <aryeh.friedman@gmail.com> > *Sent:* Tuesday, May 5, 2020 4:08:10 AM > *To:* Brandon helsley <brandon.helsley@hotmail.com> > *Cc:* freebsd-virtualization@freebsd.org < > freebsd-virtualization@freebsd.org>; Robert Crowston < > crowston@protonmail.com> > *Subject:* Re: Bhyve help > > > > On Tue, May 5, 2020 at 6:00 AM Brandon helsley < > brandon.helsley@hotmail.com> wrote: > > The handbook only says vmm doesn't it. I got bhyve to start without virti= o > kernel module as well as the if_tap but with vmm modules. > > > The handbook section on virtualization (FreeBSD host) is at best awful an= d > misleading your best guide is the bhyve man page (especially the examples > there) here is the modules I load for the same set up I recommended you t= ry > as a advanced beginners lesson in virtualization and networking. And an > example script for using them: > > /boot/loader.conf: > > kern.geom.label.disk_ident.enable=3D"0" > kern.geom.label.gptid.enable=3D"0" > opensolaris_load=3D"YES" > zfs_load=3D"YES" > ipfw_load=3D"YES" > > ipdivert_load=3D"YES" > linux_load=3D"YES" > > In the real /boot/loader.conf the following are commented out because > PetiteCloud takes care of them when it loads but unless you want to get > into more advanced stuff (like how to install non-standard ports) you > should uncomment them. > > vmm_load=3D"YES" > if_tap_load=3D"YES" > nmdm_load=3D"YES" > > The script to load the file server VM: > > #!/bin/sh > # > # Generated by PetiteCloud 0.2.6 > # > > ifconfig tap12 destroy > ifconfig tap12 create > ifconfig tap12 up > sleep 5 > ifconfig bridge0 addm tap12 up > bhyvectl --destroy --vm=3Db829e56e9b4289a1 > /usr/sbin/bhyve -c cores=3D4 -m 4096 -AI -H -P -w -g 0 -s 0:0,hostbridge = -s > 1,virtio-net,tap12 -s 2,ahci-hd,/vms/import/win10 -s 29,fbuf,tcp=3D > 0.0.0.0:5912,w=3D1920,h=3D1080 -s 30,xhci,tablet -s 31,lpc -l > com1,/dev/nmdm12B -l bootrom,/usr/local/share/uefi-firmware/BHYVE_UEFI.fd > b829e56e9b4289a1&>/dev/null > echo $!>/var/run/petitecloud/b829e56e9b4289a1 > sleep 10 > > > I'm at this screen:please choose the appropriate terminal type for your > system.common console types are: ansi, vt100, xterm, cons25w. > > Console type [vt100]: > > Sent from Outlook Mobile <https://aka.ms/blhgte>; > ------------------------------ > *From:* Aryeh Friedman <aryeh.friedman@gmail.com> > *Sent:* Tuesday, May 5, 2020 3:52:26 AM > *To:* Brandon helsley <brandon.helsley@hotmail.com> > *Cc:* freebsd-virtualization@freebsd.org < > freebsd-virtualization@freebsd.org>; Robert Crowston < > crowston@protonmail.com> > *Subject:* Re: Bhyve help > > > > On Tue, May 5, 2020 at 5:21 AM Brandon helsley < > brandon.helsley@hotmail.com> wrote: > > I have re0 but the ip address is under wlan0 with my CenturyLink > > > In order to use vtnet and bridging (both required for bhyve networking) > you need to load the load the virtio kernel module as well as the if_tap > and vmm modules (the first one provides the host side of the virtual NIC > and the second loads the hypervisor components) > > > Sent from Outlook Mobile<https://aka.ms/blhgte>; > > ________________________________ > From: Robert Crowston <crowston@protonmail.com> > Sent: Tuesday, May 5, 2020 3:14:43 AM > To: Brandon helsley <brandon.helsley@hotmail.com>; > freebsd-virtualization@freebsd.org <freebsd-virtualization@freebsd.org> > Subject: Re: Bhyve help > > What are your network interfaces called on your machine? You probably hav= e > to change igb0 in the example to em0 (an Intel card) or re0 (a Realtek > card). Type =E2=80=9Cifconfig=E2=80=9D to list all the interfaces, and lo= ok for ones with > an ip address to figure it out. > > On Tue, May 5, 2020 at 10:10, Brandon helsley <brandon.helsley@hotmail.co= m > <mailto:brandon.helsley@hotmail.com>> wrote: > I'm trying to set up bhyve like the example to learn and when doing the > physical interface interface get the result no such file or directory the > command is: > > ifconfig bridge0 addm igb0 addm tap0 > > "In this example, the physical interface is igb0" > > > Sent from Outlook Mobile<https://aka.ms/blhgte>; > _______________________________________________ > freebsd-virtualization@freebsd.org mailing list > https://lists.freebsd.org/mailman/listinfo/freebsd-virtualization > To unsubscribe, send any mail to " > freebsd-virtualization-unsubscribe@freebsd.org" > > > _______________________________________________ > freebsd-virtualization@freebsd.org mailing list > https://lists.freebsd.org/mailman/listinfo/freebsd-virtualization > To unsubscribe, send any mail to " > freebsd-virtualization-unsubscribe@freebsd.org" > > > > -- > Aryeh M. Friedman, Lead Developer, http://www.PetiteCloud.org > > > > -- > Aryeh M. Friedman, Lead Developer, http://www.PetiteCloud.org > --=20 Aryeh M. Friedman, Lead Developer, http://www.PetiteCloud.org
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?CAGBxaXnbwWeKSRx8x98ksD0J9TVn3D_JGCY_mUSJ%2B-MTer_A7Q>