Skip site navigation (1)Skip section navigation (2)
Date:      Fri, 13 Jul 2012 09:31:22 -0700
From:      Sean Bruno <seanbru@yahoo-inc.com>
To:        "freebsd-stable@freebsd.org" <freebsd-stable@freebsd.org>
Subject:   stable/9 panic  Bad tailq NEXT(0xffffffff80e52660->tqh_last) != NULL
Message-ID:  <1342197082.2664.4.camel@powernoodle.corp.yahoo.com>

next in thread | raw e-mail | index | archive | help
Well this is new.  I haven't a clue what Dell has done on this R620, but
this popped up today after I did a boat load of BIOS updates and tried
to install stable/9 from our yahoo tree.  If anyone sees the obvious
solution here, I'd love to figure it out.

found-> vendor=0x14e4, dev=0x165f, revid=0x00
        domain=0, bus=2, slot=0, func=1
        class=02-00-00, hdrtype=0x00, mfdev=1
        cmdreg=0x0006, statreg=0x0010, cachelnsz=16 (dwords)
        lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
        intpin=b, irq=6
        powerspec 3  supports D0 D3  current D0
        MSI supports 8 messages, 64 bit
        MSI-X supports 17 messages in map 0x20
        map[10]: type Prefetchable Memory, range 64, base 0xd50d0000,
size 16, enabled
pcib1: allocated prefetch range (0xd50d0000-0xd50dffff) for rid 10 of
pci0:2:0:1
        map[18]: type Prefetchable Memory, range 64, base 0xd50e0000,
size 16, enabled
pcib1: allocated prefetch range (0xd50e0000-0xd50effff) for rid 18 of
pci0:2:0:1
        map[20]: type Prefetchable Memory, range 64, base 0xd50f0000,
size 16, enabled
pcib1: allocated prefetch range (0xd50f0000-0xd50fffff) for rid 20 of
pci0:2:0:1
pcib1: matched entry for 2.0.INTB
pcib1: slot 0 INTB hardwired to IRQ 36
bge0: <Broadcom NetXtreme Gigabit Ethernet, ASIC rev. 0x5720000> mem
0xd50a0000-0xd50affff,0xd50b0000-0xd50bffff,0xd50c0000-0xd50cffff irq 34
at device 0.0 on pci2
bge0: APE FW version: NCSI v1.0.80.0
bge0: attempting to allocate 1 MSI vectors (8 supported)
msi: routing MSI IRQ 264 to local APIC 0 vector 59
bge0: using IRQ 264 for MSI
bge0: CHIP ID 0x05720000; ASIC REV 0x5720; CHIP REV 0x57200; PCI-E
bge0: Disabling fastboot
bge0: Disabling fastboot
miibus0: <MII bus> on bge0
brgphy0: <BCM5720C 1000BASE-T media interface> PHY 1 on miibus0
brgphy0: OUI 0x001be9, model 0x0036, rev. 0
brgphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT,
1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
bge0: bpf attached
bge0: Ethernet address: 18:03:73:fd:9e:36
bge1: <Broadcom NetXtreme Gigabit Ethernet, ASIC rev. 0x5720000> mem
0xd50d0000-0xd50dffff,0xd50e0000-0xd50effff,0xd50f0000-0xd50fffff irq 36
at device 0.1 on pci2
bge1: APE FW version: NCSI v1.0.80.0
bge1: attempting to allocate 1 MSI vectors (8 supported)
msi: routing MSI IRQ 265 to local APIC 0 vector 60
bge1: using IRQ 265 for MSI
bge1: CHIP ID 0x05720000; ASIC REV 0x5720; CHIP REV 0x57200; PCI-E
bge1: Disabling fastboot
bge1: Disabling fastboot
miibus1: <MII bus> on bge1
brgphy1: <BCM5720C 1000BASE-T media interface> PHY 2 on miibus1
brgphy1: OUI 0x001be9, model 0x0036, rev. 0
brgphy1:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT,
1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
bge1: bpf attached
bge1: Ethernet address: 18:03:73:fd:9e:37
pcib2: <ACPI PCI-PCI bridge> irq 53 at device 1.1 on pci0
pcib0: allocated type 3 (0xd8800000-0xd8ffffff) for rid 20 of pcib2
pcib0: allocated type 3 (0xd5100000-0xd51fffff) for rid 24 of pcib2
pcib2:   domain            0
pcib2:   secondary bus     1
pcib2:   subordinate bus   1
pcib2:   memory decode     0xd8800000-0xd8ffffff
pcib2:   prefetched decode 0xd5100000-0xd51fffff
pci1: <ACPI PCI bus> on pcib2
pci1: domain=0, physical bus=1
found-> vendor=0x14e4, dev=0x165f, revid=0x00
        domain=0, bus=1, slot=0, func=0
        class=02-00-00, hdrtype=0x00, mfdev=1
        cmdreg=0x0006, statreg=0x0010, cachelnsz=16 (dwords)
        lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
        intpin=a, irq=15
        powerspec 3  supports D0 D3  current D0
        MSI supports 8 messages, 64 bit
        MSI-X supports 17 messages in map 0x20
        map[10]: type Prefetchable Memory, range 64, base 0xd51a0000,
size 16, enabled
pcib2: allocated prefetch range (0xd51a0000-0xd51affff) for rid 10 of
pci0:1:0:0
        map[18]: type Prefetchable Memory, range 64, base 0xd51b0000,
size 16, enabled
pcib2: allocated prefetch range (0xd51b0000-0xd51bffff) for rid 18 of
pci0:1:0:0
        map[20]: type Prefetchable Memory, range 64, base 0xd51c0000,
size 16, enabled
pcib2: allocated prefetch range (0xd51c0000-0xd51cffff) for rid 20 of
pci0:1:0:0
pcib2: matched entry for 1.0.INTA
pcib2: slot 0 INTA hardwired to IRQ 35
found-> vendor=0x14e4, dev=0x165f, revid=0x00
        domain=0, bus=1, slot=0, func=1
        class=02-00-00, hdrtype=0x00, mfdev=1
        cmdreg=0x0006, statreg=0x0010, cachelnsz=16 (dwords)
        lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
        intpin=b, irq=6
        powerspec 3  supports D0 D3  current D0
        MSI supports 8 messages, 64 bit
        MSI-X supports 17 messages in map 0x20
        map[10]: type Prefetchable Memory, range 64, base 0xd51d0000,
size 16, enabled
pcib2: allocated prefetch range (0xd51d0000-0xd51dffff) for rid 10 of
pci0:1:0:1
        map[18]: type Prefetchable Memory, range 64, base 0xd51e0000,
size 16, enabled
pcib2: allocated prefetch range (0xd51e0000-0xd51effff) for rid 18 of
pci0:1:0:1
        map[20]: type Prefetchable Memory, range 64, base 0xd51f0000,
size 16, enabled
pcib2: allocated prefetch range (0xd51f0000-0xd51fffff) for rid 20 of
pci0:1:0:1
pcib2: matched entry for 1.0.INTB
pcib2: slot 0 INTB hardwired to IRQ 38
bge2: <Broadcom NetXtreme Gigabit Ethernet, ASIC rev. 0x5720000> mem
0xd51a0000-0xd51affff,0xd51b0000-0xd51bffff,0xd51c0000-0xd51cffff irq 35
at device 0.0 on pci1
bge2: APE FW version: NCSI v1.0.80.0
bge2: attempting to allocate 1 MSI vectors (8 supported)
msi: routing MSI IRQ 266 to local APIC 0 vector 61
bge2: using IRQ 266 for MSI
bge2: CHIP ID 0x05720000; ASIC REV 0x5720; CHIP REV 0x57200; PCI-E
bge2: Disabling fastboot
bge2: Disabling fastboot
miibus2: <MII bus> on bge2
brgphy2: <BCM5720C 1000BASE-T media interface> PHY 1 on miibus2
brgphy2: OUI 0x001be9, model 0x0036, rev. 0
brgphy2:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT,
1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
bge2: bpf attached
bge2: Ethernet address: 18:03:73:fd:9e:34
bge3: <Broadcom NetXtreme Gigabit Ethernet, ASIC rev. 0x5720000> mem
0xd51d0000-0xd51dffff,0xd51e0000-0xd51effff,0xd51f0000-0xd51fffff irq 38
at device 0.1 on pci1
bge3: APE FW version: NCSI v1.0.80.0
bge3: attempting to allocate 1 MSI vectors (8 supported)
msi: routing MSI IRQ 267 to local APIC 0 vector 62
bge3: using IRQ 267 for MSI
bge3: CHIP ID 0x05720000; ASIC REV 0x5720; CHIP REV 0x57200; PCI-E
bge3: Disabling fastboot
bge3: Disabling fastboot
miibus3: <MII bus> on bge3
brgphy3: <BCM5720C 1000BASE-T media interface> PHY 2 on miibus3
brgphy3: OUI 0x001be9, model 0x0036, rev. 0
brgphy3:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT,
1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
bge3: bpf attached
bge3: Ethernet address: 18:03:73:fd:9e:35
pcib3: <ACPI PCI-PCI bridge> irq 53 at device 2.0 on pci0
pcib3:   domain            0
pcib3:   secondary bus     4
pcib3:   subordinate bus   4
pcib3:   no prefetched decode
pci4: <ACPI PCI bus> on pcib3
pci4: domain=0, physical bus=4
pcib4: <ACPI PCI-PCI bridge> irq 53 at device 2.2 on pci0
pcib0: allocated type 4 (0xf000-0xffff) for rid 1c of pcib4
pcib0: allocated type 3 (0xd9000000-0xd9ffffff) for rid 20 of pcib4
pcib4:   domain            0
pcib4:   secondary bus     3
pcib4:   subordinate bus   3
pcib4:   I/O decode        0xf000-0xffff
pcib4:   memory decode     0xd9000000-0xd9ffffff
pcib4:   no prefetched decode
pci3: <ACPI PCI bus> on pcib4
pci3: domain=0, physical bus=3
found-> vendor=0x1000, dev=0x005b, revid=0x01
        domain=0, bus=3, slot=0, func=0
        class=01-04-00, hdrtype=0x00, mfdev=0
        cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords)
        lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
        intpin=a, irq=15
        powerspec 3  supports D0 D1 D2 D3  current D0
        MSI supports 1 message, 64 bit
        MSI-X supports 16 messages in map 0x14
        map[10]: type I/O Port, range 32, base 0xfc00, size  8, enabled
pcib4: allocated I/O port range (0xfc00-0xfcff) for rid 10 of pci0:3:0:0
        map[14]: type Memory, range 64, base 0xd9ffc000, size 14,
enabled
pcib4: allocated memory range (0xd9ffc000-0xd9ffffff) for rid 14 of
pci0:3:0:0
        map[1c]: type Memory, range 64, base 0xd9f80000, size 18,
enabled
pcib4: allocated memory range (0xd9f80000-0xd9fbffff) for rid 1c of
pci0:3:0:0
pcib4: matched entry for 3.0.INTA
pcib4: slot 0 INTA hardwired to IRQ 42
mfi0: <Dell PERC H710P Mini (monolithics)> port 0xfc00-0xfcff mem
0xd9ffc000-0xd9ffffff,0xd9f80000-0xd9fbffff irq 42 at device 0.0 on pci3
mfi0: attempting to allocate 1 MSI vectors (1 supported)
msi: routing MSI IRQ 268 to local APIC 0 vector 63
mfi0: using IRQ 268 for MSI
mfi0: Using MSI
mfi0: Megaraid SAS driver Ver 4.23 
mfi0: MaxCmd = 3f0 MaxSgl = 46 state = b73c03f0 
mfi0: Max fw cmds= 1008, sizing driver pool to 128
mfip0: <SCSI Passthrough Bus> on mfi0
pcib5: <ACPI PCI-PCI bridge> irq 53 at device 3.0 on pci0
pcib0: allocated type 4 (0xe000-0xefff) for rid 1c of pcib5
pcib0: allocated type 3 (0xda000000-0xdaffffff) for rid 20 of pcib5
pcib5:   domain            0
pcib5:   secondary bus     5
pcib5:   subordinate bus   5
pcib5:   I/O decode        0xe000-0xefff
pcib5:   memory decode     0xda000000-0xdaffffff
pcib5:   no prefetched decode
pci5: <ACPI PCI bus> on pcib5
pci5: domain=0, physical bus=5
found-> vendor=0x8086, dev=0x105e, revid=0x06
        domain=0, bus=5, slot=0, func=0
        class=02-00-00, hdrtype=0x00, mfdev=1
        cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords)
        lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
        intpin=a, irq=15
        powerspec 2  supports D0 D3  current D0
        MSI supports 1 message, 64 bit
        map[10]: type Memory, range 32, base 0xdaf80000, size 17,
enabled
pcib5: allocated memory range (0xdaf80000-0xdaf9ffff) for rid 10 of
pci0:5:0:0
        map[14]: type Memory, range 32, base 0xdafa0000, size 17,
enabled
pcib5: allocated memory range (0xdafa0000-0xdafbffff) for rid 14 of
pci0:5:0:0
        map[18]: type I/O Port, range 32, base 0xecc0, size  5, enabled
pcib5: allocated I/O port range (0xecc0-0xecdf) for rid 18 of pci0:5:0:0
pcib5: matched entry for 5.0.INTA
pcib5: slot 0 INTA hardwired to IRQ 48
found-> vendor=0x8086, dev=0x105e, revid=0x06
        domain=0, bus=5, slot=0, func=1
        class=02-00-00, hdrtype=0x00, mfdev=1
        cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords)
        lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
        intpin=b, irq=6
        powerspec 2  supports D0 D3  current D0
        MSI supports 1 message, 64 bit
        map[10]: type Memory, range 32, base 0xdafc0000, size 17,
enabled
pcib5: allocated memory range (0xdafc0000-0xdafdffff) for rid 10 of
pci0:5:0:1
        map[14]: type Memory, range 32, base 0xdafe0000, size 17,
enabled
pcib5: allocated memory range (0xdafe0000-0xdaffffff) for rid 14 of
pci0:5:0:1
        map[18]: type I/O Port, range 32, base 0xece0, size  5, enabled
pcib5: allocated I/O port range (0xece0-0xecff) for rid 18 of pci0:5:0:1
pcib5: matched entry for 5.0.INTB
pcib5: slot 0 INTB hardwired to IRQ 52
em0: <Intel(R) PRO/1000 Network Connection 7.3.2> port 0xecc0-0xecdf mem
0xdaf80000-0xdaf9ffff,0xdafa0000-0xdafbffff irq 48 at device 0.0 on pci5
em0: attempting to allocate 1 MSI vectors (1 supported)
msi: routing MSI IRQ 269 to local APIC 0 vector 64
em0: using IRQ 269 for MSI
em0: Using an MSI interrupt
em0: bpf attached
em0: Ethernet address: 00:15:17:78:89:dc
em1: <Intel(R) PRO/1000 Network Connection 7.3.2> port 0xece0-0xecff mem
0xdafc0000-0xdafdffff,0xdafe0000-0xdaffffff irq 52 at device 0.1 on pci5
em1: attempting to allocate 1 MSI vectors (1 supported)
msi: routing MSI IRQ 270 to local APIC 0 vector 65
em1: using IRQ 270 for MSI
em1: Using an MSI interrupt
em1: bpf attached
em1: Ethernet address: 00:15:17:78:89:dd
pci0: <base peripheral> at device 4.0 (no driver attached)
pci0: <base peripheral> at device 4.1 (no driver attached)
pci0: <base peripheral> at device 4.2 (no driver attached)
pci0: <base peripheral> at device 4.3 (no driver attached)
pci0: <base peripheral> at device 4.4 (no driver attached)
pci0: <base peripheral> at device 4.5 (no driver attached)
pci0: <base peripheral> at device 4.6 (no driver attached)
pci0: <base peripheral> at device 4.7 (no driver attached)
pci0: <base peripheral> at device 5.0 (no driver attached)
pci0: <base peripheral> at device 5.2 (no driver attached)
pcib6: <PCI-PCI bridge> irq 16 at device 17.0 on pci0
pcib6:   domain            0
pcib6:   secondary bus     6
pcib6:   subordinate bus   6
pcib6:   no prefetched decode
pci6: <PCI bus> on pcib6
pci6: domain=0, physical bus=6
pci0: <simple comms> at device 22.0 (no driver attached)
pci0: <simple comms> at device 22.1 (no driver attached)
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xdc8fd000-0xdc8fd3ff irq
23 at device 26.0 on pci0
ioapic0: routing intpin 23 (PCI IRQ 23) to lapic 0 vector 66
usbus0: EHCI version 1.0
usbus0 on ehci0
pcib7: <ACPI PCI-PCI bridge> at device 28.0 on pci0
pcib7:   domain            0
pcib7:   secondary bus     7
pcib7:   subordinate bus   7
pcib7:   no prefetched decode
device_attach: pcib7 attach returned 6
pcib7: <ACPI PCI-PCI bridge> irq 19 at device 28.7 on pci0
panic: Bad tailq NEXT(0xffffffff80e52660->tqh_last) != NULL
cpuid = 0
KDB: stack backtrace:
db_trace_self_wrapper() at db_trace_self_wrapper+0x2a
kdb_backtrace() at kdb_backtrace+0x37
panic() at panic+0x1d8
rman_init() at rman_init+0x17c
pcib_alloc_window() at pcib_alloc_window+0x9f
pcib_attach_common() at pcib_attach_common+0x457
acpi_pcib_pci_attach() at acpi_pcib_pci_attach+0x1c
device_attach() at device_attach+0x72
bus_generic_attach() at bus_generic_attach+0x1a
acpi_pci_attach() at acpi_pci_attach+0x164
device_attach() at device_attach+0x72
bus_generic_attach() at bus_generic_attach+0x1a
acpi_pcib_attach() at acpi_pcib_attach+0x1a7
acpi_pcib_acpi_attach() at acpi_pcib_acpi_attach+0x1f6
device_attach() at device_attach+0x72
bus_generic_attach() at bus_generic_attach+0x1a
acpi_attach() at acpi_attach+0xbc1
device_attach() at device_attach+0x72
bus_generic_attach() at bus_generic_attach+0x1a
nexus_acpi_attach() at nexus_acpi_attach+0x69
device_attach() at device_attach+0x72
bus_generic_new_pass() at bus_generic_new_pass+0xd6
bus_set_pass() at bus_set_pass+0x7a
configure() at configure+0xa
mi_startup() at mi_startup+0x77
btext() at btext+0x2c
Uptime: 1s
Automatic reboot in 15 seconds - press a key on the console to abort
--> Press a key on the console to reboot,
--> or switch off the system now.






Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?1342197082.2664.4.camel>