Date: Thu, 16 Mar 2006 11:42:42 +0100 From: Lila <liladude@aruba.it> To: John Baldwin <jhb@freebsd.org> Cc: freebsd-arch@freebsd.org Subject: Re: Neteasy DRP-32TXD ethernet problems on FreeBSD 6.0 Message-ID: <44194122.2010100@aruba.it> In-Reply-To: <200603150847.29175.jhb@freebsd.org> References: <44140E09.3000203@aruba.it> <200603140818.09838.jhb@freebsd.org> <4417B560.3080609@aruba.it> <200603150847.29175.jhb@freebsd.org>
next in thread | previous in thread | raw e-mail | index | archive | help
John Baldwin ha scritto: > > Patching the module should be fine. Can you provide the output of dmesg > after you have kldloaded the module? Also, did the patch apply cleanly > or where there any rejects? And, what version are you testing this on? I finally managed to build and install my kernel with patched drivers. I'm working with FreeBSD 6.0-out-of-the-box (waiting for ethernet before I can Patch applied with no problem to both files. I'm sorry but my kernel with no ethernet was unstable, so I could not get a dmesg when I kloaded if_de (it only worked once...) Now the output when I insert my etherenet card (or I boot with card inserted) is this: TUPLE: LINKTARGET [3]: 43 49 53 Manufacturer ID: d11302ab Functions: Network Adaptor, Memory Function Extension: 0102 Function Extension: 0280969800 Function Extension: 0200e1f505 Function Extension: 0301 Product version: 5.0 Product name: Neteasy | DRP-32TXD Cardbus PC Card | V1.0 | | TUPLE: Unknown(0x04) [6]: 03 01 2a 00 00 00 cardbus0: Opening BAR: type=IO, bar=10, len=0100 cardbus0: Opening BAR: type=MEM, bar=14, len=0400 CIS reading done cardbus0: Non-prefetchable memory at 88000000-880003ff cardbus0: IO port at 1000-10ff found-> vendor=0x1186, dev=0x1561, revid=0x11 bus=2, slot=0, func=0 class=02-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0000, statreg=0x0290, cachelnsz=8 (dwords) lattimer=0xa8 (5040 ns), mingnt=0xff (63750 ns), maxlat=0xff (63750 ns) intpin=a, irq=10 powerspec 2 supports D0 D1 D2 D3 current D0 dc0: <Neteasy DRP-32TXD Cardbus 10/100> port 0x1000-0x10ff mem 0x88000000-0x880003ff irq 10 at device 0.0 on cardbus0 dc0: MII without any PHY! device_attach: dc0 attach returned 6 I'm googling the "MII without any PHY" problem but haven't found a solution right now. thanks a lot for your attention. Lila
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?44194122.2010100>