Date: Sat, 08 Dec 2007 14:18:25 -0700 From: Predrag Punosevac <punosevac@math.arizona.edu> To: Gary Kline <kline@tao.thought.org> Cc: FreeBSD Mailing List <freebsd-questions@FreeBSD.ORG> Subject: Re: copying DVD material :: somewhat OT. Message-ID: <475B0A21.5000708@math.arizona.edu> In-Reply-To: <20071208210331.GA1241@thought.org> References: <20071208210331.GA1241@thought.org>
next in thread | previous in thread | raw e-mail | index | archive | help
Gary Kline wrote: > Folks, > > IFF k3b works, and I think it might, I'll put up a howto > on my bsd virtual site. Make this domain more useful. > The help from this group has been outstanding, but getting things > CD and DVD actually working has been a study in persseverancce. > > That said, first,if there is a website for total dweebs, please > post it; or send it privately. I just bought some "Memorex > DVD+RW" ; I want to record a 117 minute commercial DVD. > On the back on the DVDs is says these are only good for 60 minutes > in great qualty; it is good up to 120 minutes, and so on. > Nutshell: how good will k3b and my Pioneer burner do on dubbing > this professioally recorded disc? Also, Does thw "RW" mean tthat > I can re-tape over this with another edu DVD? > > gary > > PS: I much prefer analogue cassettes; I've been taping stuff > since I taped "American Bandstand" off the TV :-) > > > > > I wrote K3b how to http://www.bsd-srbija.org/dokumentacija/doku.php/rezanje_cd_i_dvd_diskova_pomo%C4%87u_k3b but you will need little bit of Serbian language to read it. Actually probably you could follow article even if you do not speak Serbian as the language is generic and there are only three important steps you need to do. Step 1 Editing your /boot/loader.conf file with atapicam_load="YES" hw.ata.ata_dma="1" hw.ata.atapi_dma="1" since FreeBSD is using atapicam device to write DVD Step 2 Edit your /etc/devfs.conf with various permission. Most of those are needed for a work station anyway perm /dev/acd0 0666 perm /dev/cd0 0666 # Commonly used by many ports link cd0 cdrom link cd0 dvd link cd0 rdvd link acd0 cdrom link acd0 dvd link acd0 rdvd # Misc other devices perm cdrom 0666 perm dvd 0666 perm rdvd 0666 perm xpt0 0666 perm pass0 0666 Step 3 Edit your /etc/fstab file if you want to use K3b as a normal user since the disk has to be mounted on the mount point which belong to you [pedja@ /usr/home/Pedja]$ more /etc/fstab #These are my options /dev/cd0 /usr/home/Pedja/mnt/cdrom cd9660 rw, noauto 0 0 /dev/acd0 /usr/home/Pedja/mnt/cdrom cd9660 rw, noauto 0 0 You do not need HAL for things to work but is not going to heart. Also read make showinfo /usr/ports/sysutils/k3b Best, Predrag
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?475B0A21.5000708>