Date: Sat, 30 May 2009 10:44:24 +1000 From: Timothy Mukaibo <tinkysama@mukaibo.com> To: Andriy Gapon <avg@icyb.net.ua> Cc: freebsd-acpi@freebsd.org, freebsd-current@freebsd.org Subject: Re: ACPI Panic on Current, AMD64 Message-ID: <2492E55D-5C36-4A93-BB69-B1539AAB0087@mukaibo.com> In-Reply-To: <4A1E9B34.3040202@icyb.net.ua> References: <49159824-57EB-4628-9F1C-CE9243465D02@mukaibo.com> <200905271725.44235.jhb@freebsd.org> <849F0899-7AD9-4D7A-B849-D7FB36CE73AE@mukaibo.com> <200905280800.24867.jhb@freebsd.org> <4A1E9B34.3040202@icyb.net.ua>
next in thread | previous in thread | raw e-mail | index | archive | help
Hello Andriy,
timothy@tinkysama:~$ cat /boot/loader.conf
snd_hda_load="YES"
uscanner_load="YES"
Here's the dmesg:
Copyright (c) 1992-2009 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 7.2-STABLE #1: Fri May 15 13:03:42 EST 2009
root@tinkysama.local:/usr/obj/usr/src/sys/GENERIC
module_register: module uhub/uscanner already exists!
Module uhub/uscanner failed to register: 17
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: AMD Athlon(tm) 64 X2 Dual Core Processor 4600+ (2410.99-MHz K8-
class CPU)
Origin = "AuthenticAMD" Id = 0x40fb2 Stepping = 2
Features
=
0x178bfbff
<
FPU
,VME
,DE
,PSE
,TSC
,MSR
,PAE
,MCE
,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT>
Features2=0x2001<SSE3,CX16>
AMD Features=0xea500800<SYSCALL,NX,MMX+,FFXSR,RDTSCP,LM,3DNow!+,
3DNow!>
AMD Features2=0x1f<LAHF,CMP,SVM,ExtAPIC,CR8>
Cores per package: 2
usable memory = 3206512640 (3057 MB)
avail memory = 3093467136 (2950 MB)
ACPI APIC Table: <Nvidia NVDAACPI>
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
ioapic0: Changing APIC ID to 2
ioapic0 <Version 1.1> irqs 0-23 on motherboard
kbd1 at kbdmux0
acpi0: <Nvidia NVDAACPI> on motherboard
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
acpi0: reservation of 0, a0000 (3) failed
acpi0: reservation of 100000, bfdf0000 (3) failed
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: <memory, RAM> at device 0.0 (no driver attached)
pci0: <memory, RAM> at device 0.1 (no driver attached)
pci0: <memory, RAM> at device 0.2 (no driver attached)
pci0: <memory, RAM> at device 0.3 (no driver attached)
pci0: <memory, RAM> at device 0.4 (no driver attached)
pci0: <memory, RAM> at device 0.5 (no driver attached)
pci0: <memory, RAM> at device 0.6 (no driver attached)
pci0: <memory, RAM> at device 0.7 (no driver attached)
pcib1: <ACPI PCI-PCI bridge> at device 4.0 on pci0
pci1: <ACPI PCI bus> on pcib1
vgapci0: <VGA-compatible display> mem 0xdc000000-0xdcffffff,
0xc0000000-0xcfffffff,0xdd000000-0xddffffff irq 16 at device 0.0 on pci1
pci0: <memory, RAM> at device 8.0 (no driver attached)
isab0: <PCI-ISA bridge> port 0xfc00-0xfc7f at device 9.0 on pci0
isa0: <ISA bus> on isab0
pci0: <serial bus, SMBus> at device 9.1 (no driver attached)
pci0: <memory, RAM> at device 9.2 (no driver attached)
ohci0: <OHCI (generic) USB controller> mem 0xdffff000-0xdfffffff irq
20 at device 10.0 on pci0
ohci0: [GIANT-LOCKED]
ohci0: [ITHREAD]
usb0: OHCI version 1.0, legacy support
usb0: <OHCI (generic) USB controller> on ohci0
usb0: USB revision 1.0
uhub0: <nVidia OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0
uhub0: 10 ports with 10 removable, self powered
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xdfffe000-0xdfffe0ff
irq 21 at device 10.1 on pci0
ehci0: [GIANT-LOCKED]
ehci0: [ITHREAD]
usb1: EHCI version 1.0
usb1: companion controller, 10 ports each: usb0
usb1: <EHCI (generic) USB 2.0 controller> on ehci0
usb1: USB revision 2.0
uhub1: <nVidia EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb1
uhub1: 10 ports with 10 removable, self powered
atapci0: <nVidia nForce MCP55 UDMA133 controller> port
0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xf000-0xf00f at device 12.0 on pci0
ata0: <ATA channel 0> on atapci0
ata0: [ITHREAD]
ata1: <ATA channel 1> on atapci0
ata1: [ITHREAD]
atapci1: <nVidia nForce MCP55 SATA300 controller> port
0x9f0-0x9f7,0xbf0-0xbf3,0x970-0x977,0xb70-0xb73,0xdc00-0xdc0f mem
0xdfffd000-0xdfffdfff irq 22 at device 13.0 on pci0
atapci1: [ITHREAD]
ata2: <ATA channel 0> on atapci1
ata2: [ITHREAD]
ata3: <ATA channel 1> on atapci1
ata3: [ITHREAD]
atapci2: <nVidia nForce MCP55 SATA300 controller> port
0x9e0-0x9e7,0xbe0-0xbe3,0x960-0x967,0xb60-0xb63,0xc800-0xc80f mem
0xdfffc000-0xdfffcfff irq 23 at device 13.1 on pci0
atapci2: [ITHREAD]
ata4: <ATA channel 0> on atapci2
ata4: [ITHREAD]
ata5: <ATA channel 1> on atapci2
ata5: [ITHREAD]
atapci3: <nVidia nForce MCP55 SATA300 controller> port
0xc400-0xc407,0xc000-0xc003,0xbc00-0xbc07,0xb800-0xb803,0xb400-0xb40f
mem 0xdfffb000-0xdfffbfff irq 20 at device 13.2 on pci0
atapci3: [ITHREAD]
ata6: <ATA channel 0> on atapci3
ata6: [ITHREAD]
ata7: <ATA channel 1> on atapci3
ata7: [ITHREAD]
pcib2: <ACPI PCI-PCI bridge> at device 14.0 on pci0
pci2: <ACPI PCI bus> on pcib2
fwohci0: <Texas Instruments TSB82AA2> mem 0xdfeff000-0xdfeff7ff,
0xdfef8000-0xdfefbfff irq 16 at device 8.0 on pci2
fwohci0: [FILTER]
fwohci0: OHCI version 1.10 (ROM=0)
fwohci0: No. of Isochronous channels is 4.
fwohci0: EUI64 00:27:c3:2f:00:01:6c:20
fwohci0: invalid speed 7 (fixed to 3).
fwohci0: Phy 1394a available S800, 3 ports.
fwohci0: Link S800, max_rec 4096 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
dcons_crom0: <dcons configuration ROM> on firewire0
dcons_crom0: bus_addr 0x1378000
fwe0: <Ethernet over FireWire> on firewire0
if_fwe0: Fake Ethernet address: 02:27:c3:01:6c:20
fwe0: Ethernet address: 02:27:c3:01:6c:20
fwip0: <IP over FireWire> on firewire0
fwip0: Firewire address: 00:27:c3:2f:00:01:6c:20 @ 0xfffe00000000,
S800, maxrec 4096
sbp0: <SBP-2/SCSI over FireWire> on firewire0
fwohci0: Initiate bus reset
fwohci0: BUS reset
fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
nfe0: <NVIDIA nForce MCP55 Networking Adapter> port 0xb000-0xb007 mem
0xdfffa000-0xdfffafff,0xdfff9000-0xdfff90ff,0xdfff8000-0xdfff800f irq
21 at device 16.0 on pci0
miibus0: <MII bus> on nfe0
e1000phy0: <Marvell 88E1149 Gigabit PHY> PHY 2 on miibus0
e1000phy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX-
FDX, auto
nfe0: Ethernet address: 00:15:58:a3:c8:af
nfe0: [FILTER]
nfe0: [FILTER]
nfe0: [FILTER]
nfe0: [FILTER]
nfe0: [FILTER]
nfe0: [FILTER]
nfe0: [FILTER]
nfe0: [FILTER]
nfe1: <NVIDIA nForce MCP55 Networking Adapter> port 0xac00-0xac07 mem
0xdfff7000-0xdfff7fff,0xdfff6000-0xdfff60ff,0xdfff5000-0xdfff500f irq
22 at device 17.0 on pci0
miibus1: <MII bus> on nfe1
e1000phy1: <Marvell 88E1149 Gigabit PHY> PHY 3 on miibus1
e1000phy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX-
FDX, auto
nfe1: Ethernet address: 00:15:58:a3:c8:ae
nfe1: [FILTER]
nfe1: [FILTER]
nfe1: [FILTER]
nfe1: [FILTER]
nfe1: [FILTER]
nfe1: [FILTER]
nfe1: [FILTER]
nfe1: [FILTER]
pcib3: <ACPI PCI-PCI bridge> at device 18.0 on pci0
pci3: <ACPI PCI bus> on pcib3
pcib4: <ACPI PCI-PCI bridge> at device 22.0 on pci0
pci4: <ACPI PCI bus> on pcib4
pcib5: <ACPI PCI-PCI bridge> at device 23.0 on pci0
pci5: <ACPI PCI bus> on pcib5
acpi_tz0: <Thermal Zone> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
cpu0: <ACPI CPU> on acpi0
powernow0: <PowerNow! K8> on cpu0
cpu1: <ACPI CPU> on acpi0
powernow1: <PowerNow! K8> on cpu1
orm0: <ISA Option ROM> at iomem 0xd0000-0xd17ff on isa0
ppc0: cannot reserve I/O port range
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 8250 or not responding
sio0: [FILTER]
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on
isa0
Timecounters tick every 1.000 msec
firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
firewire0: bus manager 0 (me)
fwohci0: phy int
acd0: DMA limited to UDMA33, device found non-ATA66 cable
acd0: DVDR <LITE-ON DVDRW SOHW-1693S/KS05> at ata0-master UDMA33
ad12: 76318MB <WDC WD800AAJS-00WAA0 58.01D58> at ata6-master SATA300
SMP: AP CPU #1 Launched!
GEOM_LABEL: Label for provider ad12s1a is ufsid/49de0d6bb6139848.
GEOM_LABEL: Label for provider ad12s1d is ufsid/49de0d6ccdde671f.
GEOM_LABEL: Label for provider ad12s1e is ufsid/49de0d6c2bc3b43f.
GEOM_LABEL: Label for provider ad12s1f is ufsid/49de0d6c47a9b5cc.
Trying to mount root from ufs:/dev/ad12s1a
GEOM_LABEL: Label ufsid/49de0d6bb6139848 removed.
GEOM_LABEL: Label for provider ad12s1a is ufsid/49de0d6bb6139848.
GEOM_LABEL: Label ufsid/49de0d6c2bc3b43f removed.
GEOM_LABEL: Label for provider ad12s1e is ufsid/49de0d6c2bc3b43f.
GEOM_LABEL: Label ufsid/49de0d6c47a9b5cc removed.
GEOM_LABEL: Label for provider ad12s1f is ufsid/49de0d6c47a9b5cc.
GEOM_LABEL: Label ufsid/49de0d6ccdde671f removed.
GEOM_LABEL: Label for provider ad12s1d is ufsid/49de0d6ccdde671f.
GEOM_LABEL: Label ufsid/49de0d6bb6139848 removed.
GEOM_LABEL: Label ufsid/49de0d6c2bc3b43f removed.
GEOM_LABEL: Label ufsid/49de0d6c47a9b5cc removed.
GEOM_LABEL: Label ufsid/49de0d6ccdde671f removed.
This module (opensolaris) contains code covered by the
Common Development and Distribution License (CDDL)
see http://opensolaris.org/os/licensing/opensolaris_license/
WARNING: ZFS is considered to be an experimental feature in FreeBSD.
ZFS filesystem version 6
ZFS storage pool version 6
nfe0: link state changed to UP
fuse4bsd: version 0.3.9-pre1, FUSE ABI 7.8
On 29/05/2009, at 12:09 AM, Andriy Gapon wrote:
> on 28/05/2009 15:00 John Baldwin said the following:
>> On Thursday 28 May 2009 2:59:16 am Timothy Mukaibo wrote:
>>> Hello guys,
>>>
>>> I'm not sure if I made this clear, but the board boots with 7.2-
>>> Stable. Have there been lots of ACPI changes between 7.2 and 8.0
>>> that
>>> might have caused this regression?
>>
>> No, and the ACPI pci_link code has in fact not changed since 7.0
>> aside from a
>> few minor fixes for suspend/resume that do not affect boot (and
>> those were
>> merged into 7.1). I do wonder if perhaps there have been any
>> changes in the
>> ACPI-CA code. Hmm, ACPI-CA is identical in the two versions. All
>> of the
>> resource code is identical as well.
>
>
> Timothy,
>
> could you please check if you have any possibly related hints/tweaks
> in
> device.hints or loader.conf in both environments?
> Could you please provide 7.2 verbose dmesg? (Sorry, if you already
> did and I
> missed that)
>
> --
> Andriy Gapon
> _______________________________________________
> freebsd-current@freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-current
> To unsubscribe, send any mail to "freebsd-current-unsubscribe@freebsd.org
> "
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?2492E55D-5C36-4A93-BB69-B1539AAB0087>