Date: Tue, 11 Feb 2014 15:14:05 +0000 From: Hakisho Nukama <nukama@gmail.com> To: net@freebsd.org Subject: if_qlxgb trouble Message-ID: <CA%2Bzcas1PjrWC4EVOgQAxiePcnOH3tp6=fH1h9t5L=eQPmh8_Pg@mail.gmail.com>
next in thread | raw e-mail | index | archive | help
I am trying to connect a HP NC523SFP in
FreeBSD 10.0-RELEASE over SFP+ to a switch.
This is my current progress, any hints are welcome.
More information on demand.
# kldload -v if_qlxgb
ql0: <Qlogic ISP 80xx PCI CNA Adapter-Ethernet Function v1.1.36> mem
0xfdc00000-0xfddfffff,
0xfdbf0000-0xfdbfffff irq 16 at device 0.0 on pci11
ql0: qla_pci_attach: firmware[4.8.22.1319135230]
ql0: Ethernet address: 2c:59:e5:ca:ff:ee
ql1: <Qlogic ISP 80xx PCI CNA Adapter-Ethernet Function v1.1.36> mem
0xfd800000-0xfd9fffff,0xfd7f0000-0xfd7fffff irq 16 at device 0.1 on
pci11
ql1: qla_pci_attach: firmware[4.8.22.1319135230]
ql1: Ethernet address: 2c:59:e5:ca:ff:ee
# sysctl dev.ql
dev.ql.0.%desc: Qlogic ISP 80xx PCI CNA Adapter-Ethernet Function v1.1.36
dev.ql.0.%driver: ql
dev.ql.0.%location: slot=0 function=0 handle=\_SB_.PCI0.PT02.IPE4.
IPE1.PES1
dev.ql.0.%pnpinfo: vendor=0x1077 device=0x8020 subvendor=0x103c
subdevice=0x3733 class=0x020000
dev.ql.0.%parent: pci11
dev.ql.0.stats: 0
dev.ql.0.fw_version: 4.8.22.1319135230
dev.ql.0.debug: 0
dev.ql.0.std_replenish: 8
dev.ql.0.jumbo_replenish: 2
dev.ql.0.rcv_pkt_thres: 128
dev.ql.0.rcv_pkt_thres_d: 32
dev.ql.0.snd_pkt_thres: 16
dev.ql.0.free_pkt_thres: 1024
dev.ql.0.num_rds_rings: 2
dev.ql.0.num_sds_rings: 4
dev.ql.1.%desc: Qlogic ISP 80xx PCI CNA Adapter-Ethernet Function v1.1.36
dev.ql.1.%driver: ql
dev.ql.1.%location: slot=0 function=1 handle=\_SB_.PCI0.PT02.IPE4.IPE1.PE11
dev.ql.1.%pnpinfo: vendor=0x1077 device=0x8020 subvendor=0x103c
subdevice=0x3733 class=0x020000
dev.ql.1.%parent: pci11
dev.ql.1.stats: 0
dev.ql.1.fw_version: 4.8.22.1319135230
dev.ql.1.debug: 0
dev.ql.1.std_replenish: 8
dev.ql.1.jumbo_replenish: 2
dev.ql.1.rcv_pkt_thres: 128
dev.ql.1.rcv_pkt_thres_d: 32
dev.ql.1.snd_pkt_thres: 16
dev.ql.1.free_pkt_thres: 1024
dev.ql.1.num_rds_rings: 2
dev.ql.1.num_sds_rings: 4
# ifconfig ql0 10.13.37.21
ql0: qla_issue_cmd: cmd[0x001b2218] = 0x80000002
sig[0x001b2228] = 0xcafe0100
arg1[0x001b221c] = 0x00000000
arg2[0x001b2220] = 0x00000000
arg3[0x001b2224] = 0x00000000
ql0: qla_issue_cmd: exit (ret = 0xffffffff)
rsp = 0x80000002
arg1 = 0x00000000
arg2 = 0x00000000
arg3 = 0x00000000
ql0: qla_get_max_rds: Q8_CMD_RD_MAX_RDS_PER_CNTXT failed
ql0: qla_issue_cmd: cmd[0x001b2218] = 0x80000003
sig[0x001b2228] = 0xcafe0100
arg1[0x001b221c] = 0x00000000
arg2[0x001b2220] = 0x00000000
arg3[0x001b2224] = 0x00000000
ql0: qla_issue_cmd: exit (ret = 0xffffffff)
rsp = 0x80000003
arg1 = 0x00000000
arg2 = 0x00000000
arg3 = 0x00000000
ql0: qla_get_max_sds: Q8_CMD_RD_MAX_RDS_PER_CNTXT failed
ql0: qla_issue_cmd: cmd[0x001b2218] = 0x80000004
sig[0x001b2228] = 0xcafe0100
arg1[0x001b221c] = 0x00000000
arg2[0x001b2220] = 0x00000000
arg3[0x001b2224] = 0x00000000
ql0: qla_issue_cmd: exit (ret = 0xffffffff)
rsp = 0x80000004
arg1 = 0x00000000
arg2 = 0x00000000
arg3 = 0x00000000
ql0: qla_get_max_rules: Q8_CMD_RD_MAX_RULES_PER_CNTXT failed
ql0: qla_issue_cmd: cmd[0x001b2218] = 0x80000005
sig[0x001b2228] = 0xcafe0100
arg1[0x001b221c] = 0x00000000
arg2[0x001b2220] = 0x00000000
arg3[0x001b2224] = 0x00000000
ql0: qla_issue_cmd: exit (ret = 0xffffffff)
rsp = 0x80000005
arg1 = 0x00000000
arg2 = 0x00000000
arg3 = 0x00000000
ql0: qla_get_max_rcv_cntxts: Q8_CMD_RD_MAX_RX_CNTXT failed
ql0: qla_issue_cmd: cmd[0x001b2218] = 0x80000006
sig[0x001b2228] = 0xcafe0100
arg1[0x001b221c] = 0x00000000
arg2[0x001b2220] = 0x00000000
arg3[0x001b2224] = 0x00000000
ql0: qla_issue_cmd: exit (ret = 0xffffffff)
rsp = 0x80000006
arg1 = 0x00000000
arg2 = 0x00000000
arg3 = 0x00000000
ql0: qla_get_max_tx_cntxts: Q8_CMD_RD_MAX_TX_CNTXT failed
ql0: qla_issue_cmd: cmd[0x001b2218] = 0x80000018
sig[0x001b2228] = 0xcafe0100
arg1[0x001b221c] = 0x00000000
arg2[0x001b2220] = 0x00000000
arg3[0x001b2224] = 0x00000000
ql0: qla_issue_cmd: exit (ret = 0xffffffff)
rsp = 0x80000018
arg1 = 0x00000000
arg2 = 0x00000000
arg3 = 0x00000000
ql0: qla_get_max_mtu: Q8_CMD_RD_MAX_MTU failed
ql0: qla_issue_cmd: cmd[0x001b2218] = 0x80000019
sig[0x001b2228] = 0xcafe0100
arg1[0x001b221c] = 0x00000000
arg2[0x001b2220] = 0x00000000
arg3[0x001b2224] = 0x00000000
ql0: qla_issue_cmd: exit (ret = 0xffffffff)
rsp = 0x80000019
arg1 = 0x00000000
arg2 = 0x00000000
arg3 = 0x00000000
ql0: qla_get_max_lro: Q8_CMD_RD_MAX_LRO failed
ql0: qla_issue_cmd: cmd[0x001b2218] = 0x80000016
sig[0x001b2228] = 0xcafe0100
arg1[0x001b221c] = 0x00000000
arg2[0x001b2220] = 0x00000000
arg3[0x001b2224] = 0x00000000
ql0: qla_issue_cmd: exit (ret = 0xffffffff)
rsp = 0x80000016
arg1 = 0x00000000
arg2 = 0x00000000
arg3 = 0x00000000
ql0: qla_get_flow_control: Q8_CMD_GET_FLOW_CNTRL failed
ql0: qla_issue_cmd: cmd[0x001b2218] = 0x80000007
sig[0x001b2228] = 0xcafe0100
arg1[0x001b221c] = 0x00000000
arg2[0x001b2220] = 0x15c7d160
arg3[0x001b2224] = 0x00000120
ql0: qla_issue_cmd: exit (ret = 0xffffffff)
rsp = 0x80000007
arg1 = 0x00000000
arg2 = 0x15c7d160
arg3 = 0x00000120
ql0: qla_init_rcv_cntxt: Q8_CMD_CREATE_RX_CNTXT failed
ql0: qla_fw_cmd: xmit queue full
# ifconfig ql1 10.13.37.2
ql1: qla_issue_cmd: cmd[0x001b2218] = 0x80000002
sig[0x001b2228] = 0xcafe0101
arg1[0x001b221c] = 0x00000000
arg2[0x001b2220] = 0x00000000
arg3[0x001b2224] = 0x00000000
ql1: qla_issue_cmd: exit (ret = 0xffffffff)
rsp = 0x80000002
arg1 = 0x00000000
arg2 = 0x00000000
arg3 = 0x00000000
ql1: qla_get_max_rds: Q8_CMD_RD_MAX_RDS_PER_CNTXT failed
ql1: qla_issue_cmd: cmd[0x001b2218] = 0x80000003
sig[0x001b2228] = 0xcafe0101
arg1[0x001b221c] = 0x00000000
arg2[0x001b2220] = 0x00000000
arg3[0x001b2224] = 0x00000000
ql1: qla_issue_cmd: exit (ret = 0xffffffff)
rsp = 0x80000003
arg1 = 0x00000000
arg2 = 0x00000000
arg3 = 0x00000000
ql1: qla_get_max_sds: Q8_CMD_RD_MAX_RDS_PER_CNTXT failed
ql1: qla_issue_cmd: cmd[0x001b2218] = 0x80000004
sig[0x001b2228] = 0xcafe0101
arg1[0x001b221c] = 0x00000000
arg2[0x001b2220] = 0x00000000
arg3[0x001b2224] = 0x00000000
ql1: qla_issue_cmd: exit (ret = 0xffffffff)
rsp = 0x80000004
arg1 = 0x00000000
arg2 = 0x00000000
arg3 = 0x00000000
ql1: qla_get_max_rules: Q8_CMD_RD_MAX_RULES_PER_CNTXT failed
ql1: qla_issue_cmd: cmd[0x001b2218] = 0x80000005
sig[0x001b2228] = 0xcafe0101
arg1[0x001b221c] = 0x00000000
arg2[0x001b2220] = 0x00000000
arg3[0x001b2224] = 0x00000000
ql1: qla_issue_cmd: exit (ret = 0xffffffff)
rsp = 0x80000005
arg1 = 0x00000000
arg2 = 0x00000000
arg3 = 0x00000000
ql1: qla_get_max_rcv_cntxts: Q8_CMD_RD_MAX_RX_CNTXT failed
ql1: qla_issue_cmd: cmd[0x001b2218] = 0x80000006
sig[0x001b2228] = 0xcafe0101
arg1[0x001b221c] = 0x00000000
arg2[0x001b2220] = 0x00000000
arg3[0x001b2224] = 0x00000000
ql1: qla_issue_cmd: exit (ret = 0xffffffff)
rsp = 0x80000006
arg1 = 0x00000000
arg2 = 0x00000000
arg3 = 0x00000000
ql1: qla_get_max_tx_cntxts: Q8_CMD_RD_MAX_TX_CNTXT failed
ql1: qla_issue_cmd: cmd[0x001b2218] = 0x80000018
sig[0x001b2228] = 0xcafe0101
arg1[0x001b221c] = 0x00000000
arg2[0x001b2220] = 0x00000000
arg3[0x001b2224] = 0x00000000
ql1: qla_issue_cmd: exit (ret = 0xffffffff)
rsp = 0x80000018
arg1 = 0x00000000
arg2 = 0x00000000
arg3 = 0x00000000
ql1: qla_get_max_mtu: Q8_CMD_RD_MAX_MTU failed
ql1: qla_issue_cmd: cmd[0x001b2218] = 0x80000019
sig[0x001b2228] = 0xcafe0101
arg1[0x001b221c] = 0x00000000
arg2[0x001b2220] = 0x00000000
arg3[0x001b2224] = 0x00000000
ql1: qla_issue_cmd: exit (ret = 0xffffffff)
rsp = 0x80000019
arg1 = 0x00000000
arg2 = 0x00000000
arg3 = 0x00000000
ql1: qla_get_max_lro: Q8_CMD_RD_MAX_LRO failed
ql1: qla_issue_cmd: cmd[0x001b2218] = 0x80000016
sig[0x001b2228] = 0xcafe0101
arg1[0x001b221c] = 0x00000000
arg2[0x001b2220] = 0x00000000
arg3[0x001b2224] = 0x00000000
ql1: qla_issue_cmd: exit (ret = 0xffffffff)
rsp = 0x80000016
arg1 = 0x00000000
arg2 = 0x00000000
arg3 = 0x00000000
ql1: qla_get_flow_control: Q8_CMD_GET_FLOW_CNTRL failed
ql1: qla_issue_cmd: cmd[0x001b2218] = 0x80000007
sig[0x001b2228] = 0xcafe0101
arg1[0x001b221c] = 0x00000002
arg2[0x001b2220] = 0x0923b160
arg3[0x001b2224] = 0x00000120
ql1: qla_issue_cmd: exit (ret = 0xffffffff)
rsp = 0x80000007
arg1 = 0x00000002
arg2 = 0x0923b160
arg3 = 0x00000120
ql1: qla_init_rcv_cntxt: Q8_CMD_CREATE_RX_CNTXT failed
ql1: qla_fw_cmd: xmit queue full
# ifconfig ql0
ql0: flags=8803<UP,BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500
options=8013b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,TSO4,LINKSTATE>
ether 2c:59:e5:ca:ff:ee
inet 10.13.37.2 netmask 0xffffff00 broadcast 10.13.37.255
nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
media: Ethernet autoselect
status: no carrier
# ifconfig ql0
ql1: flags=8803<UP,BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500
options=8013b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,TSO4,LINKSTATE>
ether 2c:59:e5:ca:ff:ee
inet 10.13.37.3 netmask 0xffffff00 broadcast 10.13.37.255
nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
media: Ethernet autoselect
status: no carrier
Best Regards,
Hakisho Nukama
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?CA%2Bzcas1PjrWC4EVOgQAxiePcnOH3tp6=fH1h9t5L=eQPmh8_Pg>