Date: Thu, 3 Jan 2013 20:59:07 -0800 From: Adrian Chadd <adrian@freebsd.org> To: Monthadar Al Jaberi <monthadar@gmail.com> Cc: freebsd-wireless@freebsd.org, freebsd-mips@freebsd.org Subject: Re: ath0: could not map interrupt Message-ID: <CAJ-Vmon5pe4-7wN_0b46hyK-jiojaKC=7BWeCLH6L_viTsochg@mail.gmail.com> In-Reply-To: <CA%2BsBSoJgO6VWwc_43_SkThxG1ZcRh6iEJZdZ3yandNfEd8LNZw@mail.gmail.com> References: <CA%2BsBSoKs9s0SxAOyf91pcPv0MZMx3LCHh%2B_dTN-2mEQdYdH45g@mail.gmail.com> <CA%2BsBSo%2BpxqvWkrMjd8pmJSYUBdr0HuMW4eARJFcaFrG5tEYqBg@mail.gmail.com> <CAJ-Vmon%2BGzpXYkfE%2Bu7CDoXqmpH=zeJPcQdrukxAa9QH-2GazQ@mail.gmail.com> <CA%2BsBSoJg%2B%2BNo1ApSfUVnh1dDVgqEUPLpFJZPv3Ac%2BvaMno01sQ@mail.gmail.com> <CA%2BsBSoJY7AHjN=cMv6sfXHF4R0_z60c4q9BXEo20jCq6BJGEPg@mail.gmail.com> <CA%2BsBSoJgO6VWwc_43_SkThxG1ZcRh6iEJZdZ3yandNfEd8LNZw@mail.gmail.com>
next in thread | previous in thread | raw e-mail | index | archive | help
... wow. How the hell is that happening?! Adrian On 3 January 2013 20:54, Monthadar Al Jaberi <monthadar@gmail.com> wrote: > Maybe this is the root of the problem. > > On RSPRO the PCI start slot enumerating from 17. While RB433AH start > from 18. That can explain why Slot 20 of RB433AH won't even attach > (AR7161 only has 3 slots, slot 17 to 19). That can also explain why I > get device_timeout on slot 18 and 19 cause they are miss aligned. And > don't see any interrupts from ath(4) when enabling interrupt > debugging. > > I will keep digging into why they won't start enumerating correct. > > br, > > On Fri, Jan 4, 2013 at 2:28 AM, Monthadar Al Jaberi <monthadar@gmail.com> wrote: >> Hi, >> >> I am wondering if anyone can confirm that any ath5k (preferably >> AR5413) series miniPCI wifi works on RB433/AH/UAH. >> >> Thank you in advance >> >> On Wed, Jan 2, 2013 at 10:29 PM, Monthadar Al Jaberi >> <monthadar@gmail.com> wrote: >>> On Wed, Jan 2, 2013 at 9:43 PM, Adrian Chadd <adrian@freebsd.org> wrote: >>>> ... sounds like a definite interrupt routing issue. >>>> >>>> Who's been knee deep in the interrupt handling code in MIPS lately? Grrr. >>>> I know there's been some FDT work in MIPS and that's touched some >>>> interrupt code.. maybe that's interfering? >>> >>> I am not sure, I just re-compiled my kernel for RSPRO and it seems to work. >>> >>> I install openwrt on rb433ah and ath0 associated ok. and I could ping >>> between RSPRO(FreeBSD) and RB433AH(Openwrt). RSPRO and non working >>> RB433AH running same kernel r243866. >>> >>> Attached is my kernel config & hints. ( I am "playing around" with the >>> ar71xx_spi but that should not effect the pci code, I hope). >>> >>> # >>> # AR71XX -- Kernel configuration file for FreeBSD/MIPS for Atheros 71xx systems >>> # >>> # This includes all the common drivers for the AR71XX boards along with >>> # the usb, net80211 and atheros driver code. >>> # >>> # $FreeBSD$ >>> # >>> >>> machine mips mips >>> ident RB433AH_MFS >>> cpu CPU_MIPS4KC >>> makeoptions KERNLOADADDR=0x80050000 >>> options HZ=1000 >>> options HWPMC_HOOKS >>> >>> files "../atheros/files.ar71xx" >>> >>> # For now, hints are per-board. >>> >>> hints "RB433AH.hints" >>> >>> makeoptions DEBUG=-g #Build kernel with gdb(1) debug symbols >>> >>> # Build these as modules so small platform builds will have the >>> # modules already built. >>> makeoptions MODULES_OVERRIDE="random gpio ar71xx if_gif if_gre >>> if_bridge bridgestp usb wlan wlan_xauth wlan_acl wlan_wep wlan_tkip >>> wlan_ccmp wlan_rssadapt wlan_amrr ath ath_pci" >>> >>> options DDB >>> options KDB >>> >>> options SCHED_4BSD #4BSD scheduler >>> options INET #InterNETworking >>> #options INET6 # IPv6 >>> >>> # options NFS_CL #Network Filesystem Client >>> >>> options PSEUDOFS #Pseudo-filesystem framework >>> options _KPOSIX_PRIORITY_SCHEDULING #Posix P1003_1B real-time extensions >>> >>> # options NFS_LEGACYRPC >>> # Debugging for use in -current >>> options INVARIANTS >>> options INVARIANT_SUPPORT >>> options WITNESS >>> options WITNESS_SKIPSPIN >>> options DEBUG_REDZONE >>> options DEBUG_MEMGUARD >>> >>> options FFS #Berkeley Fast Filesystem >>> # options SOFTUPDATES #Enable FFS soft updates support >>> # options UFS_ACL #Support for access control lists >>> # options UFS_DIRHASH #Improve performance on big >>> directories >>> # options MSDOSFS # Read MSDOS filesystems; useful for USB/CF >>> >>> device pci >>> device ar71xx_pci >>> >>> # RTC - requires hackery in the spibus code to work >>> device pcf2123_rtc >>> >>> # GEOM modules >>> device geom_redboot # to get access to the SPI flash partitions >>> device geom_uzip # compressed in-memory filesystem hackery! >>> device geom_map >>> options GEOM_UZIP >>> >>> # NANDFS >>> options NANDFS >>> >>> ## Boot from the first MFS uzip >>> #options ROOTDEVNAME=\"ufs:md0.uzip\" >>> #options MD_ROOT >>> #options MD_ROOT_SIZE="9000" >>> >>> # Boot from NFS >>> options NFSLOCKD #Network Lock Manager >>> options NFSCLIENT #Network Filesystem Client >>> options NFS_ROOT >>> >>> options BOOTP >>> options BOOTP_NFSROOT >>> options BOOTP_NFSV3 >>> options BOOTP_WIRED_TO=arge1 >>> options BOOTP_COMPAT >>> options ROOTDEVNAME=\"nfs:172.16.0.101:/usr/obj/rb433ah/nfs\" >>> >>> >>> # 802.11 framework >>> options IEEE80211_DEBUG >>> options IEEE80211_ALQ >>> options IEEE80211_SUPPORT_MESH >>> # This option is currently broken for if_ath_tx. >>> options IEEE80211_SUPPORT_TDMA >>> options IEEE80211_AMPDU_AGE >>> device wlan # 802.11 support >>> device wlan_wep # 802.11 WEP support >>> device wlan_ccmp # 802.11 CCMP support >>> device wlan_tkip # 802.11 TKIP support >>> device wlan_xauth # 802.11 hostap support >>> device wlan_acl # 802.11 ACL support >>> >>> # Atheros wireless NICs >>> device ath # Atheros interface support >>> device ath_pci # Atheros PCI/Cardbus bus >>> options ATH_DEBUG >>> options ATH_DIAGAPI >>> options ATH_ENABLE_11N >>> options AH_DEBUG >>> options AH_DEBUG_ALQ >>> options ALQ >>> device ath_hal >>> option AH_SUPPORT_AR5416 >>> device ath_rate_sample >>> option AH_RXCFG_SDMAMW_4BYTES >>> option AH_AR5416_INTERRUPT_MITIGATION >>> # There's no DFS radar detection support yet so this won't actually >>> # detect radars. It however does enable the rest of the channel change >>> # machinery so DFS can be debugged. >>> option ATH_ENABLE_DFS >>> >>> device mii >>> device arge >>> #options ARGE_DEBUG # Enable if_arge debugging for now >>> >>> #device usb >>> #options USB_EHCI_BIG_ENDIAN_DESC # handle big-endian byte order >>> #options USB_DEBUG >>> #options USB_HOST_ALIGN=32 # AR71XX (MIPS in general?) requires this >>> #device ehci >>> >>> device scbus >>> #device umass >>> device da >>> >>> device rb4xx >>> >>> # On-board SPI flash >>> device spibus >>> device ar71xx_spi >>> device mmc >>> device mmcsd >>> device mmcspi >>> device mx25l >>> device nand >>> device ar71xx_wdog >>> >>> device uart >>> device uart_ar71xx >>> >>> device loop >>> device ether >>> device md >>> device bpf >>> device random >>> device if_bridge >>> device gif # ip[46] in ip[46] tunneling protocol >>> device gre # generic encapsulation - only for IPv4 in IPv4 though atm >>> >>> # Enable GPIO >>> device gpio >>> device gpioled >>> >>> options AR71XX_ROUTERBOOT >>> >>> >>> # $FreeBSD$ >>> hint.apb.0.at="nexus0" >>> hint.apb.0.irq=4 >>> >>> # uart0 >>> hint.uart.0.at="apb0" >>> # see atheros/uart_cpu_ar71xx.c why +3 >>> hint.uart.0.maddr=0x18020003 >>> hint.uart.0.msize=0x18 >>> hint.uart.0.irq=3 >>> >>> #ohci >>> #hint.ohci.0.at="apb0" >>> #hint.ohci.0.maddr=0x1c000000 >>> #hint.ohci.0.msize=0x01000000 >>> #hint.ohci.0.irq=6 >>> >>> #ehci >>> #hint.ehci.0.at="nexus0" >>> #hint.ehci.0.maddr=0x1b000000 >>> #hint.ehci.0.msize=0x01000000 >>> #hint.ehci.0.irq=1 >>> >>> # pci >>> hint.pcib.0.at="nexus0" >>> hint.pcib.0.irq=0 >>> >>> hint.arge.0.at="nexus0" >>> hint.arge.0.maddr=0x19000000 >>> hint.arge.0.msize=0x1000 >>> hint.arge.0.irq=2 >>> # PHY4 = 1 << 4 >>> hint.arge.0.phymask=0x10 >>> # Uncomment this hint for RS (not PRO) >>> # PHY20 = 1 << 20 >>> # hint.arge.0.phymask=0x100000 >>> hint.ukphy.0.at="miibus0" >>> >>> hint.arge.1.at="nexus0" >>> hint.arge.1.maddr=0x1a000000 >>> hint.arge.1.msize=0x1000 >>> hint.arge.1.irq=3 >>> # PHY1, PHY2, PHY3 >>> hint.arge.1.phymask=0x00 >>> # should be 100 for RS >>> #hint.arge.1.media=100 >>> #hint.arge.1.fduplex=1 >>> # Uncomment this hint for RS (not PRO) >>> # hint.arge.1.phymask=70000 >>> >>> # SPI flash >>> hint.spi.0.at="nexus0" >>> hint.spi.0.maddr=0x1f000000 >>> hint.spi.0.msize=0x10 >>> >>> hint.mx25l.0.at="spibus0" >>> hint.mx25l.0.cs=1 >>> >>> hint.rb_cpldbus.0.at="spibus0" >>> hint.rb_cpldbus.0.cs=1 >>> # >>> hint.onand.0.at="nandbus0" >>> hint.lnand.0.at="nandbus0" >>> hint.snand.0.at="nandbus0" >>> >>> hint.flash.0.at="nand0" >>> hint.flash.0.size="0x40000" >>> hint.flash.0.offset="0" >>> hint.flash.0.name="bootloader" >>> hint.flash.1.at="nand0" >>> hint.flash.1.size="0x3c0000" >>> hint.flash.1.offset="0x40000" >>> hint.flash.1.name="kernelfs" >>> hint.flash.2.at="nand0" >>> hint.flash.2.size="0" >>> hint.flash.2.offset="0x400000" >>> hint.flash.2.name="rootfs" >>> >>> hint.ar71xx_gpio.0.at="nexus0" >>> >>> #hint.rb_nandbusy.0.at="gpiobus0" >>> >>> hint.mmcspi.0.at="spibus0" >>> hint.mmcspi.0.cs=2 >>> >>> # Watchdog >>> hint.ar71xx_wdog.0.at="nexus0" >>> >>> >>> br, >>> >>>> >>>> >>>> Adrian >>>> >>>> >>>> On 2 January 2013 12:40, Monthadar Al Jaberi <monthadar@gmail.com> wrote: >>>>> I tested some more. First I changed the miniPCI slot. Now boot looks like this: >>>>> >>>>> pcib0 at irq 0 on nexus0 >>>>> pci0: <PCI bus> on pcib0 >>>>> ath0: <Atheros 5413> irq 2 at device 19.0 on pci0 >>>>> ath0: AR5413 mac 10.5 RF5413 phy 6.1 >>>>> ath0: 2GHz radio: 0x0000; 5GHz radio: 0x0063 >>>>> >>>>> >>>>> Then I created a hostap. But none of my other devices sees it (laptop, iphone). >>>>> >>>>> A scan results in: >>>>> >>>>> # ifconfig wlan0 scan >>>>> wlan0: ieee80211_scanreq: flags 0x1b duration 0x7fffffff mindwell 0 >>>>> maxdwell 0 nssid 0 >>>>> wlan0: start_scan_locked: active scan, duration 2147483647 mindwell 0 >>>>> maxdwell 0, desired mode 11g, append, nopick, once >>>>> wlan0: scan set 11g dwell min 200ms max 200ms >>>>> wlan0: scan_task: chan 11g -> 11g [active, dwell min 200ms max 200ms] >>>>> wlan0: ieee80211_ref_node (ieee80211_send_probereq:1822) >>>>> 0xc6f27000<00:15:6d:67:21:8d> refcnt 4 >>>>> wlan0: send probe req on channel 11 bssid ff:ff:ff:ff:ff:ff ssid "" >>>>> wlan0: scan_task: done, [ticks 2657909, dwell min 200 scanend 2150141333] >>>>> wlan0: notify scan done >>>>> root@rb433ah:~ # ath0: device timeout >>>>> >>>>> And when I try to ping a random IP address I get the following. >>>>> Interesting is that it seems to "bail out" when it tries to send >>>>> probe_resp (last in output): >>>>> $ ping -c 1 172.168.3.2 >>>>> PING 172.168.3.2 (172.168.3.2): 56 data bytes >>>>> ath0: device timeout >>>>> wlan0: received beacon from 74:44:01:2d:cb:5e rssi 14 >>>>> wlan0: [74:44:01:2d:cb:5e] discard unhandled information element, id 47, len 1 >>>>> wlan0: [74:44:01:2d:cb:5e] discard unhandled information element, id 74, len 14 >>>>> wlan0: [74:44:01:2d:cb:5e] discard unhandled information element, id 127, len 1 >>>>> wlan0: received beacon from 28:10:7b:8e:7a:ec rssi 46 >>>>> wlan0: [28:10:7b:8e:7a:ec] discard unhandled information element, id 51, len 8 >>>>> wlan0: [28:10:7b:8e:7a:ec] discard unhandled information element, id 51, len 8 >>>>> wlan0: [28:10:7b:8e:7a:ec] discard unhandled information element, id 127, len 1 >>>>> wlan0: [28:10:7b:8e:7a:ec] discard unhandled information element, id 11, len 5 >>>>> wlan0: [28:10:7b:8e:7a:ec] discard beacon frame, for off-channel 10 >>>>> wlan0: received beacon from 74:44:01:2d:cb:5e rssi 13 >>>>> wlan0: [74:44:01:2d:cb:5e] discard unhandled information element, id 47, len 1 >>>>> wlan0: [74:44:01:2d:cb:5e] discard unhandled information element, id 74, len 14 >>>>> wlan0: [74:44:01:2d:cb:5e] discard unhandled information element, id 127, len 1 >>>>> wlan0: received beacon from 74:44:01:2d:cb:5e rssi 14 >>>>> wlan0: [74:44:01:2d:cb:5e] discard unhandled information element, id 47, len 1 >>>>> wlan0: [74:44:01:2d:cb:5e] discard unhandled information element, id 74, len 14 >>>>> wlan0: [74:44:01:2d:cb:5e] discard unhandled information element, id 127, len 1 >>>>> wlan0: received beacon from 00:11:50:4d:c5:08 rssi 8 >>>>> wlan0: [00:11:50:4d:c5:08] discard unhandled information element, id 47, len 1 >>>>> wlan0: received beacon from 28:10:7b:8e:7a:ec rssi 40 >>>>> wlan0: [28:10:7b:8e:7a:ec] discard unhandled information element, id 51, len 8 >>>>> wlan0: [28:10:7b:8e:7a:ec] discard unhandled information element, id 51, len 8 >>>>> wlan0: [28:10:7b:8e:7a:ec] discard unhandled information element, id 127, len 1 >>>>> wlan0: [28:10:7b:8e:7a:ec] discard unhandled information element, id 11, len 5 >>>>> wlan0: [28:10:7b:8e:7a:ec] discard beacon frame, for off-channel 10 >>>>> wlan0: received beacon from 74:44:01:2d:cb:5e rssi 12 >>>>> wlan0: [74:44:01:2d:cb:5e] discard unhandled information element, id 47, len 1 >>>>> wlan0: [74:44:01:2d:cb:5e] discard unhandled information element, id 74, len 14 >>>>> wlan0: [74:44:01:2d:cb:5e] discard unhandled information element, id 127, len 1 >>>>> wlan0: [94:0c:6d:ad:61:18] discard frame, not to bss >>>>> wlan0: received beacon from 74:44:01:2d:cb:5e rssi 13 >>>>> wlan0: [74:44:01:2d:cb:5e] discard unhandled information element, id 47, len 1 >>>>> wlan0: [74:44:01:2d:cb:5e] discard unhandled information element, id 74, len 14 >>>>> wlan0: [74:44:01:2d:cb:5e] discard unhandled information element, id 127, len 1 >>>>> wlan0: received beacon from 28:10:7b:8e:7a:ec rssi 48 >>>>> wlan0: [28:10:7b:8e:7a:ec] discard unhandled information element, id 51, len 8 >>>>> wlan0: [28:10:7b:8e:7a:ec] discard unhandled information element, id 51, len 8 >>>>> wlan0: [28:10:7b:8e:7a:ec] discard unhandled information element, id 127, len 1 >>>>> wlan0: [28:10:7b:8e:7a:ec] discard unhandled information element, id 11, len 5 >>>>> wlan0: [28:10:7b:8e:7a:ec] discard beacon frame, for off-channel 10 >>>>> wlan0: received probe_req from 00:16:cf:3c:f7:7f rssi 2 >>>>> [00:16:cf:3c:f7:7f] discard probe_req frame, ssid mismatch: >>>>> 0x9ccca48e6a3b0c7f661c24413d7b9e54c5e59ddbe0c2bd96a2e65410b662f71a >>>>> wlan0: received probe_req from 00:16:cf:3c:f7:7f rssi 5 >>>>> [00:16:cf:3c:f7:7f] discard probe_req frame, ssid mismatch: "default" >>>>> wlan0: received beacon from 74:44:01:2d:cb:5e rssi 12 >>>>> wlan0: [74:44:01:2d:cb:5e] discard unhandled information element, id 47, len 1 >>>>> wlan0: [74:44:01:2d:cb:5e] discard unhandled information element, id 74, len 14 >>>>> wlan0: [74:44:01:2d:cb:5e] discard unhandled information element, id 127, len 1 >>>>> wlan0: received probe_req from 00:16:cf:3c:f7:7f rssi 4 >>>>> [00:16:cf:3c:f7:7f] discard probe_req frame, ssid mismatch: "default" >>>>> wlan0: received beacon from 00:11:50:4d:c5:08 rssi 9 >>>>> wlan0: [00:11:50:4d:c5:08] discard unhandled information element, id 47, len 1 >>>>> wlan0: received beacon from 28:10:7b:8e:7a:ec rssi 46 >>>>> wlan0: [28:10:7b:8e:7a:ec] discard unhandled information element, id 51, len 8 >>>>> wlan0: [28:10:7b:8e:7a:ec] discard unhandled information element, id 51, len 8 >>>>> wlan0: [28:10:7b:8e:7a:ec] discard unhandled information element, id 127, len 1 >>>>> wlan0: [28:10:7b:8e:7a:ec] discard unhandled information element, id 11, len 5 >>>>> wlan0: [28:10:7b:8e:7a:ec] discard beacon frame, for off-channel 10 >>>>> wlan0: received beacon from 74:44:01:2d:cb:5e rssi 14 >>>>> wlan0: [74:44:01:2d:cb:5e] discard unhandled information element, id 47, len 1 >>>>> wlan0: [74:44:01:2d:cb:5e] discard unhandled information element, id 74, len 14 >>>>> wlan0: [74:44:01:2d:cb:5e] discard unhandled information element, id 127, len 1 >>>>> wlan0: received beacon from 28:10:7b:8e:7a:ec rssi 40 >>>>> wlan0: [28:10:7b:8e:7a:ec] discard unhandled information element, id 51, len 8 >>>>> wlan0: [28:10:7b:8e:7a:ec] discard unhandled information element, id 51, len 8 >>>>> wlan0: [28:10:7b:8e:7a:ec] discard unhandled information element, id 127, len 1 >>>>> wlan0: [28:10:7b:8e:7a:ec] discard unhandled information element, id 11, len 5 >>>>> wlan0: [28:10:7b:8e:7a:ec] discard beacon frame, for off-channel 10 >>>>> wlan0: received beacon from 74:44:01:2d:cb:5e rssi 14 >>>>> wlan0: [74:44:01:2d:cb:5e] discard unhandled information element, id 47, len 1 >>>>> wlan0: [74:44:01:2d:cb:5e] discard unhandled information element, id 74, len 14 >>>>> wlan0: [74:44:01:2d:cb:5e] discard unhandled information element, id 127, len 1 >>>>> wlan0: received beacon from 28:10:7b:8e:7a:ec rssi 43 >>>>> wlan0: [28:10:7b:8e:7a:ec] discard unhandled information element, id 51, len 8 >>>>> wlan0: [28:10:7b:8e:7a:ec] discard unhandled information element, id 51, len 8 >>>>> wlan0: [28:10:7b:8e:7a:ec] discard unhandled information element, id 127, len 1 >>>>> wlan0: [28:10:7b:8e:7a:ec] discard unhandled information element, id 11, len 5 >>>>> wlan0: [28:10:7b:8e:7a:ec] discard beacon frame, for off-channel 10 >>>>> wlan0: received beacon from 74:44:01:2d:cb:5e rssi 12 >>>>> wlan0: [74:44:01:2d:cb:5e] discard unhandled information element, id 47, len 1 >>>>> wlan0: [74:44:01:2d:cb:5e] discard unhandled information element, id 74, len 14 >>>>> wlan0: [74:44:01:2d:cb:5e] discard unhandled information element, id 127, len 1 >>>>> wlan0: received beacon from 28:10:7b:8e:7a:ec rssi 40 >>>>> wlan0: [28:10:7b:8e:7a:ec] discard unhandled information element, id 51, len 8 >>>>> wlan0: [28:10:7b:8e:7a:ec] discard unhandled information element, id 51, len 8 >>>>> wlan0: [28:10:7b:8e:7a:ec] discard unhandled information element, id 127, len 1 >>>>> wlan0: [28:10:7b:8e:7a:ec] discard unhandled information element, id 11, len 5 >>>>> wlan0: [28:10:7b:8e:7a:ec] discard beacon frame, for off-channel 10 >>>>> wlan0: received beacon from 74:44:01:2d:cb:5e rssi 12 >>>>> wlan0: [74:44:01:2d:cb:5e] discard unhandled information element, id 47, len 1 >>>>> wlan0: [74:44:01:2d:cb:5e] discard unhandled information element, id 74, len 14 >>>>> wlan0: [74:44:01:2d:cb:5e] discard unhandled information element, id 127, len 1 >>>>> wlan0: received beacon from 28:10:7b:8e:7a:ec rssi 45 >>>>> wlan0: [28:10:7b:8e:7a:ec] discard unhandled information element, id 51, len 8 >>>>> wlan0: [28:10:7b:8e:7a:ec] discard unhandled information element, id 51, len 8 >>>>> wlan0: [28:10:7b:8e:7a:ec] discard unhandled information element, id 127, len 1 >>>>> wlan0: [28:10:7b:8e:7a:ec] discard unhandled information element, id 11, len 5 >>>>> wlan0: [28:10:7b:8e:7a:ec] discard beacon frame, for off-channel 10 >>>>> wlan0: received beacon from 74:44:01:2d:cb:5e rssi 13 >>>>> wlan0: [74:44:01:2d:cb:5e] discard unhandled information element, id 47, len 1 >>>>> wlan0: [74:44:01:2d:cb:5e] discard unhandled information element, id 74, len 14 >>>>> wlan0: [74:44:01:2d:cb:5e] discard unhandled information element, id 127, len 1 >>>>> wlan0: received beacon from 74:44:01:2d:cb:5e rssi 13 >>>>> wlan0: [74:44:01:2d:cb:5e] discard unhandled information element, id 47, len 1 >>>>> wlan0: [74:44:01:2d:cb:5e] discard unhandled information element, id 74, len 14 >>>>> wlan0: [74:44:01:2d:cb:5e] discard unhandled information element, id 127, len 1 >>>>> wlan0: received beacon from 74:44:01:2d:cb:5e rssi 13 >>>>> wlan0: [74:44:01:2d:cb:5e] discard unhandled information element, id 47, len 1 >>>>> wlan0: [74:44:01:2d:cb:5e] discard unhandled information element, id 74, len 14 >>>>> wlan0: [74:44:01:2d:cb:5e] discard unhandled information element, id 127, len 1 >>>>> wlan0: received beacon from 28:10:7b:8e:7a:ec rssi 47 >>>>> wlan0: [28:10:7b:8e:7a:ec] discard unhandled information element, id 51, len 8 >>>>> wlan0: [28:10:7b:8e:7a:ec] discard unhandled information element, id 51, len 8 >>>>> wlan0: [28:10:7b:8e:7a:ec] discard unhandled information element, id 127, len 1 >>>>> wlan0: [28:10:7b:8e:7a:ec] discard unhandled information element, id 11, len 5 >>>>> wlan0: [28:10:7b:8e:7a:ec] discard beacon frame, for off-channel 10 >>>>> wlan0: received beacon from 74:44:01:2d:cb:5e rssi 12 >>>>> wlan0: [74:44:01:2d:cb:5e] discard unhandled information element, id 47, len 1 >>>>> wlan0: [74:44:01:2d:cb:5e] discard unhandled information element, id 74, len 14 >>>>> wlan0: [74:44:01:2d:cb:5e] discard unhandled information element, id 127, len 1 >>>>> wlan0: received beacon from 28:10:7b:8e:7a:ec rssi 44 >>>>> wlan0: [28:10:7b:8e:7a:ec] discard unhandled information element, id 51, len 8 >>>>> wlan0: [28:10:7b:8e:7a:ec] discard unhandled information element, id 51, len 8 >>>>> wlan0: [28:10:7b:8e:7a:ec] discard unhandled information element, id 127, len 1 >>>>> wlan0: [28:10:7b:8e:7a:ec] discard unhandled information element, id 11, len 5 >>>>> wlan0: [28:10:7b:8e:7a:ec] discard beacon frame, for off-channel 10 >>>>> wlan0: received beacon from 74:44:01:2d:cb:5e rssi 14 >>>>> wlan0: [74:44:01:2d:cb:5e] discard unhandled information element, id 47, len 1 >>>>> wlan0: [74:44:01:2d:cb:5e] discard unhandled information element, id 74, len 14 >>>>> wlan0: [74:44:01:2d:cb:5e] discard unhandled information element, id 127, len 1 >>>>> wlan0: received probe_req from 00:aa:70:77:bd:77 rssi 0 >>>>> wlan0: [00:aa:70:77:bd:77] recv probe req >>>>> wlan0: ieee80211_ref_node (ieee80211_send_proberesp:2489) >>>>> 0xc6f27000<00:15:6d:67:21:8d> refcnt 5 >>>>> wlan0: send probe resp on channel 11 to 00:aa:70:77:bd:77 >>>>> ath0: ath_raw_xmit: sc_inreset_cnt > 0; bailing >>>>> .... >>>>> >>>>> >>>>> On Tue, Jan 1, 2013 at 7:33 PM, Monthadar Al Jaberi <monthadar@gmail.com> wrote: >>>>>> Hi, >>>>>> >>>>>> ath(4) failed to attach on my Routerboard RB433AH running FreeBSD >>>>>> current. This is what I got during boo-up. >>>>>> >>>>>> pcib0 at irq 0 on nexus0 >>>>>> pci0: <PCI bus> on pcib0 >>>>>> ath0: <Atheros 5413> irq 3 at device 20.0 on pci0 >>>>>> ath0: could not map interrupt >>>>>> device_attach: ath0 attach returned 6 >>>>>> >>>>>> Any idea why? Anyone else is running ath(4) on this board? My wifi >>>>>> card is a Ubiquity X2 with AR5413 chip. >>>>>> >>>>>> br, >>>>>> >>>>>> >>>>>> -- >>>>>> Monthadar Al Jaberi >>>>> >>>>> >>>>> >>>>> -- >>>>> Monthadar Al Jaberi >>>>> _______________________________________________ >>>>> freebsd-wireless@freebsd.org mailing list >>>>> http://lists.freebsd.org/mailman/listinfo/freebsd-wireless >>>>> To unsubscribe, send any mail to "freebsd-wireless-unsubscribe@freebsd.org" >>> >>> >>> >>> -- >>> Monthadar Al Jaberi >> >> >> >> -- >> Monthadar Al Jaberi > > > > -- > Monthadar Al Jaberi
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?CAJ-Vmon5pe4-7wN_0b46hyK-jiojaKC=7BWeCLH6L_viTsochg>