Date: Sat, 29 Jan 2005 21:26:24 -0600 From: Ben Kaduk <minimarmot@gmail.com> To: freebsd-current@freebsd.org Subject: panic (trap 12 page fault) in bfe driver Message-ID: <47d0403c05012919264bfdecd1@mail.gmail.com>
index | next in thread | raw e-mail
[-- Attachment #1 --]
prolepsis# uname -a
FreeBSD prolepsis.mooo.com 5.3-STABLE FreeBSD 5.3-STABLE #0: Wed Dec
15 23:44:53 CST 2004
root@prolepsis.mooo.com:/usr/obj/usr/src/sys/GENERIC i386
On my laptop, issuing a simple:
# ifconfig bfe0 down
# ifconfig bfe0 up
causes the following panic (hand transcribed):
Fatal trap 12: page fault while in kernel mode
fault virtual address = 0xb
fault code = supervisor read, page not present
instruction pointer = 0x8:0xc0832b46
stack pointer = 0x10:0xf0811abc
frame pointer = 0x10:0xf0811ad0
code segment = base 0x0, limit 0xfffff, type 0x1b
= DPL 0, pres 1, def32 1, gran 1
processor eflags = interrupt enabled, resume, IOPL = 0
current process = 10990 (ifconfig)
trap number = 12
panic: page fault
Uptime: 2d21h46m17s
last logged console messages:
Jan 29 15:37:33 prolepsis dhclient: send_packet: Network is down
Jan 29 15:37:36 prolepsis last message repeated 2 times
Jan 29 15:37:40 prolepsis login: ROOT LOGIN (root) on ttyv1
Jan 29 15:37:43 prolepsis dhclient: send_packet: Network is down
I had issued the 'ifconfig bfe0 down' then unplugged the ethernet
cable, moved to a different jack, and plugged the cable in; the root
login was me logging in to issue the 'ifconfig bfe0 up' command. It
appears that there had been some local trouble on the local network,
as the send_packet messages were also present on my other machine; the
network trouble seemed to affect the dhcp server, because upon reboot
dhclient did not seem to be able to find a server, assigning a
10.0.0.1 address (instead of the 130.126.xx.xx that should have shown
up), prompting me to issue another sequence of 'ifconfig bfe0 down'
and 'ifconfig bfe0 up' which resulted in the same panic.
Is this panic caused by external troubles, or should I provide further
information?
I am currently building a debug kernel (GENERIC + DDB, KDB) -- are
there any other options that I should include?
The dmesg of a verbose boot is attached.
Thanks
Benjamin Kaduk
[-- Attachment #2 --]
Copyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.3-STABLE #0: Wed Dec 15 23:44:53 CST 2004
root@prolepsis.mooo.com:/usr/obj/usr/src/sys/GENERIC
Preloaded elf kernel "/boot/kernel/kernel" at 0xc0f8b000.
Preloaded elf module "/boot/kernel/linux.ko" at 0xc0f8b1d8.
Preloaded elf module "/boot/modules/nvidia.ko" at 0xc0f8b284.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc0f8b330.
Calibrating clock(s) ... i8254 clock: 1193167 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz quality 0
Calibrating TSC clock ... TSC clock: 2492652652 Hz
CPU: Mobile Intel(R) Pentium(R) 4 - M CPU 2.50GHz (2492.65-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0xf29 Stepping = 9
Features=0xbfebf9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
real memory = 1073405952 (1023 MB)
Physical memory chunk(s):
0x0000000000001000 - 0x000000000009efff, 647168 bytes (158 pages)
0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages)
0x0000000001026000 - 0x000000003ed7efff, 1037406208 bytes (253273 pages)
avail memory = 1036652544 (988 MB)
bios32: Found BIOS32 Service Directory header at 0xc00ffe80
bios32: Entry = 0xffe90 (c00ffe90) Rev = 0 Len = 1
pcibios: PCI BIOS entry at 0xf0000+0xc96e
pnpbios: Found PnP BIOS data at 0xc00fe2d0
pnpbios: Entry = f0000:e2f4 Rev = 1.0
pnpbios: Event flag at 4b4
Other BIOS signatures found:
wlan: <802.11 Link Layer>
random: <entropy source, Software, Yarrow>
io: <I/O>
mem: <memory>
Pentium Pro MTRR support enabled
null: <null device, zero device>
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <DELL CPi R > on motherboard
acpi0: [MPSAFE]
pci_open(1): mode 1 addr port (0x0cf8) is 0x8000eac4
pci_open(1a): mode1res=0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=1a308086)
pcibios: BIOS version 2.10
Found $PIR table, 9 entries at 0xc00fc580
PCI-Only Interrupts: none
Location Bus Device Pin Link IRQs
embedded 0 29 A 0x60 3 4 5 6 7 9 10 11 12 14 15
embedded 0 29 B 0x63 3 4 5 6 7 9 10 11 12 14 15
embedded 0 29 C 0x62 3 4 5 6 7 9 10 11 12 14 15
embedded 0 29 D 0x6b 3 4 5 6 7 9 10 11 12 14 15
embedded 0 30 A 0x60 3 4 5 6 7 9 10 11 12 14 15
embedded 0 30 B 0x61 3 4 5 6 7 9 10 11 12 14 15
embedded 0 30 C 0x62 3 4 5 6 7 9 10 11 12 14 15
embedded 0 30 D 0x63 3 4 5 6 7 9 10 11 12 14 15
embedded 0 31 A 0x62 3 4 5 6 7 9 10 11 12 14 15
embedded 0 31 B 0x61 3 4 5 6 7 9 10 11 12 14 15
embedded 1 0 A 0x60 3 4 5 6 7 9 10 11 12 14 15
embedded 2 0 A 0x62 3 4 5 6 7 9 10 11 12 14 15
embedded 2 1 A 0x63 3 4 5 6 7 9 10 11 12 14 15
embedded 2 1 B 0x63 none
embedded 2 3 A 0x61 3 4 5 6 7 9 10 11 12 14 15
embedded 2 3 B 0x63 3 4 5 6 7 9 10 11 12 14 15
embedded 8 0 A 0x61 3 4 5 6 7 9 10 11 12 14 15
embedded 8 0 B 0x63 3 4 5 6 7 9 10 11 12 14 15
embedded 8 1 A 0x61 3 4 5 6 7 9 10 11 12 14 15
embedded 8 1 B 0x63 3 4 5 6 7 9 10 11 12 14 15
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: bus 0 dev 31 func 0
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: bus 0 dev 31 func 0
atpic: Programming IRQ9 as level/low
ACPI timer: 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 -> 10
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
cpu0: <ACPI CPU (4 Cx states)> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
acpi_acad0: <AC Adapter> on acpi0
acpi_cmbat0: <Control Method Battery> on acpi0
acpi_cmbat1: <Control Method Battery> on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_button0: <Power Button> on acpi0
acpi_button1: <Sleep Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
ACPI link \\_SB_.PCI0.LNKB has invalid initial irq 11, ignoring
ACPI PCI link initial configuration:
\\_SB_.PCI0.LNKA irq 0: [ 9 10 11] 11+ low,level,sharable 0.31.0
\\_SB_.PCI0.LNKB irq 0: [ 5 7] 0+ low,level,sharable 0.31.1
\\_SB_.PCI0.LNKC irq 0: [ 9 10 11] 11+ low,level,sharable 0.31.2
\\_SB_.PCI0.LNKD irq 0: [ 5 7 9 10 11] 11+ low,level,sharable 0.31.3
\\_SB_.PCI0.LNKA irq 0: [ 9 10 11] 11+ low,level,sharable 0.29.0
\\_SB_.PCI0.LNKD irq 0: [ 5 7 9 10 11] 11+ low,level,sharable 0.29.1
\\_SB_.PCI0.LNKC irq 0: [ 9 10 11] 11+ low,level,sharable 0.29.2
\\_SB_.PCI0.LNKH irq 0: [ 3 4 5 6 7 9 10 11 12 14 15] 11+ low,level,sharable 0.29.3
\\_SB_.PCI0.LNKA irq 0: [ 9 10 11] 11+ low,level,sharable 0.1.0
\\_SB_.PCI0.LNKB irq 0: [ 5 7] 0+ low,level,sharable 0.1.1
pci0: <ACPI PCI bus> on pcib0
pci0: physical bus=0
map[10]: type 3, range 32, base e8000000, size 27, enabled
found-> vendor=0x8086, dev=0x1a30, revid=0x04
bus=0, slot=0, func=0
class=06-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0106, statreg=0x2090, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x1a31, revid=0x04
bus=0, slot=1, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0107, statreg=0x00a0, cachelnsz=0 (dwords)
lattimer=0x20 (960 ns), mingnt=0x0c (3000 ns), maxlat=0x00 (0 ns)
map[20]: type 4, range 32, base 0000bf80, size 5, enabled
pcib0: matched entry for 0.29.INTA (src \\_SB_.PCI0.LNKA)
pcib0: possible interrupts: 9 10 11
ACPI PCI link arbitrated settings:
\\_SB_.PCI0.LNKH (references 1, priority 11411):
interrupts: 11 10 5 9 12 6 4 3 7 15 14
penalty: 80 80 100 160 5010 5010 5010 5010 5050 50010 50010
\\_SB_.PCI0.LNKB (references 2, priority 5150):
interrupts: 5 7
penalty: 100 5050
\\_SB_.PCI0.LNKD (references 2, priority 2188):
interrupts: 11 10 5 9 7
penalty: 80 80 100 160 5050
\\_SB_.PCI0.LNKA (references 3, priority 320):
interrupts: 11 10 9
penalty: 80 80 160
\\_SB_.PCI0.LNKC (references 2, priority 213):
interrupts: 11 10 9
penalty: 80 80 160
pcib0: slot 29 INTA routed to irq 11 via \\_SB_.PCI0.LNKA
found-> vendor=0x8086, dev=0x24c2, revid=0x03
bus=0, slot=29, func=0
class=0c-03-00, hdrtype=0x00, mfdev=1
cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=11
map[20]: type 4, range 32, base 0000bf40, size 5, enabled
pcib0: matched entry for 0.29.INTB (src \\_SB_.PCI0.LNKD)
pcib0: possible interrupts: 5 7 9 10 11
ACPI PCI link arbitrated settings:
\\_SB_.PCI0.LNKH (references 1, priority 11458):
interrupts: 5 10 11 9 12 6 4 3 7 15 14
penalty: 150 160 190 320 5020 5020 5020 5020 5100 50020 50020
\\_SB_.PCI0.LNKB (references 2, priority 5250):
interrupts: 5 7
penalty: 150 5100
\\_SB_.PCI0.LNKD (references 2, priority 2368):
interrupts: 5 10 11 9 7
penalty: 150 160 190 320 5100
\\_SB_.PCI0.LNKC (references 2, priority 446):
interrupts: 10 11 9
penalty: 160 190 320
pcib0: slot 29 INTB routed to irq 11 via \\_SB_.PCI0.LNKD
found-> vendor=0x8086, dev=0x24c4, revid=0x03
bus=0, slot=29, func=1
class=0c-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=11
map[20]: type 4, range 32, base 0000bf20, size 5, enabled
pcib0: matched entry for 0.29.INTC (src \\_SB_.PCI0.LNKC)
pcib0: possible interrupts: 9 10 11
ACPI PCI link arbitrated settings:
\\_SB_.PCI0.LNKH (references 1, priority 11503):
interrupts: 5 10 11 9 12 6 4 3 7 15 14
penalty: 200 240 290 480 5030 5030 5030 5030 5150 50030 50030
\\_SB_.PCI0.LNKB (references 2, priority 5350):
interrupts: 5 7
penalty: 200 5150
\\_SB_.PCI0.LNKC (references 2, priority 673):
interrupts: 10 11 9
penalty: 240 290 480
pcib0: slot 29 INTC routed to irq 11 via \\_SB_.PCI0.LNKC
found-> vendor=0x8086, dev=0x24c7, revid=0x03
bus=0, slot=29, func=2
class=0c-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=c, irq=11
map[10]: type 1, range 32, base f4fffc00, size 10, enabled
pcib0: matched entry for 0.29.INTD (src \\_SB_.PCI0.LNKH)
pcib0: possible interrupts: 3 4 5 6 7 9 10 11 12 14 15
ACPI PCI link arbitrated settings:
\\_SB_.PCI0.LNKH (references 1, priority 11549):
interrupts: 5 10 11 9 12 6 4 3 7 15 14
penalty: 250 320 390 640 5040 5040 5040 5040 5200 50040 50040
\\_SB_.PCI0.LNKB (references 2, priority 5450):
interrupts: 5 7
penalty: 250 5200
pcib0: slot 29 INTD routed to irq 11 via \\_SB_.PCI0.LNKH
found-> vendor=0x8086, dev=0x24cd, revid=0x03
bus=0, slot=29, func=7
class=0c-03-20, hdrtype=0x00, mfdev=0
cmdreg=0x0106, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=d, irq=11
powerspec 2 supports D0 D3 current D0
found-> vendor=0x8086, dev=0x2448, revid=0x83
bus=0, slot=30, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0107, statreg=0x8080, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x24cc, revid=0x03
bus=0, slot=31, func=0
class=06-01-00, hdrtype=0x00, mfdev=1
cmdreg=0x010f, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
map[20]: type 4, range 32, base 0000bfa0, size 4, enabled
found-> vendor=0x8086, dev=0x24ca, revid=0x03
bus=0, slot=31, func=1
class=01-01-8a, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=255
map[10]: type 4, range 32, base 0000b800, size 8, enabled
map[14]: type 4, range 32, base 0000bc40, size 6, enabled
map[18]: type 1, range 32, base f4fff800, size 9, enabled
map[1c]: type 1, range 32, base f4fff400, size 8, enabled
pcib0: matched entry for 0.31.INTB (src \\_SB_.PCI0.LNKB)
pcib0: possible interrupts: 5 7
ACPI PCI link arbitrated settings:
\\_SB_.PCI0.LNKB (references 2, priority 5550):
interrupts: 5 7
penalty: 300 5250
atpic: Programming IRQ5 as level/low
pcib0: slot 31 INTB routed to irq 5 via \\_SB_.PCI0.LNKB
found-> vendor=0x8086, dev=0x24c5, revid=0x03
bus=0, slot=31, func=5
class=04-01-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=5
powerspec 2 supports D0 D3 current D0
map[10]: type 4, range 32, base 0000b400, size 8, enabled
map[14]: type 4, range 32, base 0000b080, size 7, enabled
pcib0: matched entry for 0.31.INTB (src \\_SB_.PCI0.LNKB)
pcib0: slot 31 INTB is already routed to irq 5
found-> vendor=0x8086, dev=0x24c6, revid=0x03
bus=0, slot=31, func=6
class=07-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=5
powerspec 2 supports D0 D3 current D0
agp0: <Intel 82845 host to AGP bridge> mem 0xe8000000-0xefffffff at device 0.0 on pci0
agp0: Reserved 0x8000000 bytes for rid 0x10 type 3 at 0xe8000000
agp0: allocating GATT for aperture of size 128M
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pcib1: secondary bus 1
pcib1: subordinate bus 1
pcib1: I/O decode 0xc000-0xcfff
pcib1: memory decode 0xfc000000-0xfdffffff
pcib1: prefetched decode 0xf0000000-0xf3ffffff
ACPI PCI link initial configuration:
\\_SB_.PCI0.LNKA irq*11: [ 9 10 11] 11+ low,level,sharable 1.0.0
pci1: <ACPI PCI bus> on pcib1
pci1: physical bus=1
map[10]: type 1, range 32, base fc000000, size 24, enabled
pcib1: device (null) requested decoded memory range 0xfc000000-0xfcffffff
map[14]: type 3, range 32, base f0000000, size 26, enabled
pcib1: device (null) requested decoded memory range 0xf0000000-0xf3ffffff
pcib1: matched entry for 1.0.INTA (src \\_SB_.PCI0.LNKA)
pcib1: slot 0 INTA is already routed to irq 11
found-> vendor=0x10de, dev=0x0286, revid=0xa1
bus=1, slot=0, func=0
class=03-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0027, statreg=0x02b0, cachelnsz=0 (dwords)
lattimer=0x20 (960 ns), mingnt=0x05 (1250 ns), maxlat=0x01 (250 ns)
intpin=a, irq=11
powerspec 2 supports D0 D3 current D0
nvidia0: <GeForce4 4200 Go> mem 0xf0000000-0xf3ffffff,0xfc000000-0xfcffffff irq 11 at device 0.0 on pci1
nvidia0: Reserved 0x1000000 bytes for rid 0x10 type 3 at 0xfc000000
nvidia0: Reserved 0x4000000 bytes for rid 0x14 type 3 at 0xf0000000
nvidia0: [GIANT-LOCKED]
uhci0: <Intel 82801DB (ICH4) USB controller USB-A> port 0xbf80-0xbf9f irq 11 at device 29.0 on pci0
uhci0: Reserved 0x20 bytes for rid 0x20 type 4 at 0xbf80
uhci0: [GIANT-LOCKED]
usb0: <Intel 82801DB (ICH4) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
ums0: Logitech Optical USB Mouse, rev 2.00/3.40, addr 2, iclass 3/1
ums0: 3 buttons and Z dir.
uhci1: <Intel 82801DB (ICH4) USB controller USB-B> port 0xbf40-0xbf5f irq 11 at device 29.1 on pci0
uhci1: Reserved 0x20 bytes for rid 0x20 type 4 at 0xbf40
uhci1: [GIANT-LOCKED]
usb1: <Intel 82801DB (ICH4) USB controller USB-B> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2: <Intel 82801DB (ICH4) USB controller USB-C> port 0xbf20-0xbf3f irq 11 at device 29.2 on pci0
uhci2: Reserved 0x20 bytes for rid 0x20 type 4 at 0xbf20
uhci2: [GIANT-LOCKED]
usb2: <Intel 82801DB (ICH4) USB controller USB-C> on uhci2
usb2: USB revision 1.0
uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
pci0: <serial bus, USB> at device 29.7 (no driver attached)
pcib2: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pcib2: secondary bus 2
pcib2: subordinate bus 2
pcib2: I/O decode 0xd000-0xefff
pcib2: memory decode 0xf6000000-0xfbffffff
pcib2: prefetched decode 0xfff00000-0xfffff
pcib2: Subtractively decoded bridge.
ACPI PCI link initial configuration:
\\_SB_.PCI0.LNKD irq*11: [ 5 7 9 10 11] 11+ low,level,sharable 2.1.0
\\_SB_.PCI0.LNKD irq*11: [ 5 7 9 10 11] 11+ low,level,sharable 2.1.1
\\_SB_.PCI0.LNKB irq* 5: [ 5 7] 0+ low,level,sharable 2.3.0
\\_SB_.PCI0.LNKD irq*11: [ 5 7 9 10 11] 11+ low,level,sharable 2.3.1
\\_SB_.PCI0.LNKC irq*11: [ 9 10 11] 11+ low,level,sharable 2.0.0
\\_SB_.PCI0.LNKB irq* 5: [ 5 7] 0+ low,level,sharable 2.8.0
\\_SB_.PCI0.LNKB irq* 5: [ 5 7] 0+ low,level,sharable 2.8.1
pci2: <ACPI PCI bus> on pcib2
pci2: physical bus=2
map[10]: type 1, range 32, base faffe000, size 13, enabled
pcib2: device (null) requested decoded memory range 0xfaffe000-0xfaffffff
pcib2: matched entry for 2.0.INTA (src \\_SB_.PCI0.LNKC)
pcib2: slot 0 INTA is already routed to irq 11
found-> vendor=0x14e4, dev=0x4401, revid=0x01
bus=2, slot=0, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0106, statreg=0x0010, cachelnsz=0 (dwords)
lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=11
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type 1, range 32, base 00000000, size 12, memory disabled
found-> vendor=0x104c, dev=0xac44, revid=0x02
bus=2, slot=1, func=0
class=06-07-00, hdrtype=0x02, mfdev=1
cmdreg=0x0000, statreg=0x0210, cachelnsz=8 (dwords)
lattimer=0x20 (960 ns), mingnt=0x40 (16000 ns), maxlat=0x07 (1750 ns)
intpin=a, irq=255
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type 1, range 32, base faffd800, size 11, enabled
pcib2: device (null) requested decoded memory range 0xfaffd800-0xfaffdfff
map[14]: type 1, range 32, base faff8000, size 14, enabled
pcib2: device (null) requested decoded memory range 0xfaff8000-0xfaffbfff
pcib2: matched entry for 2.1.INTA (src \\_SB_.PCI0.LNKD)
pcib2: slot 1 INTA is already routed to irq 11
found-> vendor=0x104c, dev=0x8029, revid=0x00
bus=2, slot=1, func=1
class=0c-00-10, hdrtype=0x00, mfdev=1
cmdreg=0x0116, statreg=0x0210, cachelnsz=8 (dwords)
lattimer=0x20 (960 ns), mingnt=0x02 (500 ns), maxlat=0x04 (1000 ns)
intpin=a, irq=11
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type 1, range 32, base faff6000, size 13, enabled
pcib2: device (null) requested decoded memory range 0xfaff6000-0xfaff7fff
pcib2: matched entry for 2.3.INTA (src \\_SB_.PCI0.LNKB)
pcib2: slot 3 INTA is already routed to irq 5
found-> vendor=0x14e4, dev=0x4324, revid=0x02
bus=2, slot=3, func=0
class=02-80-00, hdrtype=0x00, mfdev=0
cmdreg=0x0106, statreg=0x0010, cachelnsz=0 (dwords)
lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=5
powerspec 2 supports D0 D1 D2 D3 current D0
bfe0: <Broadcom BCM4401 Fast Ethernet> mem 0xfaffe000-0xfaffffff irq 11 at device 0.0 on pci2
bfe0: Reserved 0x2000 bytes for rid 0x10 type 3 at 0xfaffe000
miibus0: <MII bus> on bfe0
bmtphy0: <BCM4401 10/100baseTX PHY> on miibus0
bmtphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
bfe0: bpf attached
bfe0: Ethernet address: 00:0b:db:99:e8:c7
bfe0: [GIANT-LOCKED]
cbb0: <TI4510 PCI-CardBus Bridge> at device 1.0 on pci2
pcib2: device cbb0 requested decoded memory range 0xf6000000-0xfbffffff
cbb0: Lazy allocation of 0x1000 bytes rid 0x10 type 3 at 0xf6000000
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
pcib2: matched entry for 2.1.INTA (src \\_SB_.PCI0.LNKD)
pcib2: slot 1 INTA is already routed to irq 11
cbb0: [MPSAFE]
cbb0: PCI Configuration space:
0x00: 0xac44104c 0x02100007 0x06070002 0x00822008
0x10: 0xf6000000 0x020000a0 0x20040302 0xfffff000
0x20: 0x00000000 0xfffff000 0x00000000 0xfffffffc
0x30: 0x00000000 0xfffffffc 0x00000000 0x0740010b
0x40: 0x013e1028 0x00000001 0x00000000 0x00000000
0x50: 0x00000000 0x00000000 0x00000000 0x00000000
0x60: 0x00000000 0x00000000 0x00000000 0x00000000
0x70: 0x00000000 0x00000000 0x00000000 0x00000000
0x80: 0x28405061 0x00000000 0x001f0000 0x012c1202
0x90: 0x606482c0 0x00000000 0x00000000 0x00000000
0xa0: 0xfe120001 0x00c00000 0x00000000 0x00000000
0xb0: 0x00000000 0x00000000 0x00000000 0x00000000
0xc0: 0x00000000 0x00000000 0x00000000 0x00000000
0xd0: 0x00000000 0x00000000 0x00000000 0x00000000
0xe0: 0x00000000 0x00000000 0x00000000 0x00000000
0xf0: 0x00000000 0x00000000 0x00000000 0x00000000
fwohci0: vendor=104c, dev=8029
fwohci0: <1394 Open Host Controller Interface> mem 0xfaff8000-0xfaffbfff,0xfaffd800-0xfaffdfff irq 11 at device 1.1 on pci2
fwohci0: Reserved 0x800 bytes for rid 0x10 type 3 at 0xfaffd800
fwohci0: [MPSAFE]
fwohci0: OHCI version 1.10 (ROM=0)
fwohci0: No. of Isochronous channels is 4.
fwohci0: EUI64 46:4f:c0:00:1d:2f:1c:61
fwohci0: Phy 1394a available S400, 2 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
fwe0: <Ethernet over FireWire> on firewire0
if_fwe0: Fake Ethernet address: 46:4f:c0:2f:1c:61
fwe0: bpf attached
fwe0: Ethernet address: 46:4f:c0:2f:1c:61
fwe0: if_start running deferred for Giant
sbp0: <SBP-2/SCSI over FireWire> on firewire0
fwohci0: Initiate bus reset
fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
firewire0: bus manager 0 (me)
pci2: <network> at device 3.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH4 UDMA100 controller> port 0xbfa0-0xbfaf,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 31.1 on pci0
atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0xbfa0
ata0: channel #0 on atapci0
atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0
atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6
ata0: reset tp1 mask=03 ostat0=50 ostat1=00
ata0-master: stat=0x50 err=0x01 lsb=0x00 msb=0x00
ata0-slave: stat=0x00 err=0x01 lsb=0x00 msb=0x00
ata0: reset tp2 stat0=50 stat1=00 devices=0x1<ATA_MASTER>
ata0: [MPSAFE]
ata1: channel #1 on atapci0
atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170
atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376
ata1: reset tp1 mask=03 ostat0=50 ostat1=00
ata1-master: stat=0x00 err=0x01 lsb=0x14 msb=0xeb
ata1-slave: stat=0x00 err=0x01 lsb=0x14 msb=0xeb
ata1: reset tp2 stat0=00 stat1=00 devices=0xc<ATAPI_SLAVE,ATAPI_MASTER>
ata1: [MPSAFE]
pci0: <multimedia, audio> at device 31.5 (no driver attached)
pci0: <simple comms> at device 31.6 (no driver attached)
psmcpnp0: <PS/2 mouse port> irq 12 on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0065
atkbd: keyboard ID 0x41ab (2)
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000
atkbd0: [GIANT-LOCKED]
psm0: current command byte:0065
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model GlidePoint, device ID 0-00, 2 buttons
psm0: config:00000000, flags:00000008, packet size:3
psm0: syncmask:c0, syncbits:00
sio0: irq maps: 0xa01 0xa09 0xa01 0xa01
sio0: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 flags 0x10 on acpi0
sio0: type 16550A
ppc0: using extended I/O port range
ppc0: ECP SPP ECP+EPP SPP
ppc0: <ECP parallel printer port> port 0x778-0x77b,0x378-0x37f irq 7 drq 1 on acpi0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
plip0: bpf attached
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
ata: ata0 already exists; skipping it
ata: ata1 already exists; skipping it
atkbdc: atkbdc0 already exists; skipping it
ppc: ppc0 already exists; skipping it
sio: sio0 already exists; skipping it
Trying Read_Port at 203
Trying Read_Port at 243
Trying Read_Port at 283
Trying Read_Port at 2c3
Trying Read_Port at 303
Trying Read_Port at 343
Trying Read_Port at 383
Trying Read_Port at 3c3
ex_isa_identify()
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
ahc_isa_probe 11: ioport 0xbc00 alloc failed
sc: sc0 already exists; skipping it
vga: vga0 already exists; skipping it
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
orm0: <ISA Option ROMs> at iomem 0xcf800-0xcffff,0xc0000-0xcf7ff on isa0
pmtimer0 on isa0
adv0: not probed (disabled)
aha0: not probed (disabled)
aic0: not probed (disabled)
bt0: not probed (disabled)
cs0: not probed (disabled)
ed0: not probed (disabled)
fdc0 failed to probe at port 0x3f0-0x3f5 irq 6 drq 2 on isa0
fe0: not probed (disabled)
ie0: not probed (disabled)
lnc0: not probed (disabled)
pcic0 failed to probe at port 0x3e0 iomem 0xd0000 on isa0
pcic1: not probed (disabled)
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
sio1 failed to probe at port 0x2f8 irq 3 on isa0
sio2: not probed (disabled)
sio3: not probed (disabled)
sn0: not probed (disabled)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
fb0: vga0, vga, type:VGA (5), flags:0x7007f
fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000
fb0: init mode:24, bios mode:3, current mode:24
fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k
VGA parameters upon power-up
50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 54 80
bf 1f 00 4f 0d 0e 00 00 07 80 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
VGA parameters in BIOS for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 54 80
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
EGA/VGA parameters to be used for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 54 80
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
vt0: not probed (disabled)
isa_probe_children: probing PnP devices
Device configuration finished.
procfs registered
Timecounter "TSC" frequency 2492652652 Hz quality 800
Timecounters tick every 10.000 msec
Linux ELF exec handler installed
lo0: bpf attached
cpu0: set speed to 100.0%
acpi_cpu: throttling enabled, 8 steps (100% to 12.5%), currently 100.0%
acpi_acad0: acline initialization start
acpi_acad0: On Line
acpi_acad0: acline initialization done, tried 1 times
acpi_cmbat0: battery initialization start
acpi_cmbat0: battery initialization done, tried 1 times
acpi_cmbat1: battery initialization start
cpu0: Performance states changed
ata0-master: pio=0x0c wdma=0x22 udma=0x45 cable=80pin
ata0-master: setting PIO4 on Intel ICH4 chip
ata0-master: setting UDMA100 on Intel ICH4 chip
ad0: <IC25N080ATMR04-0/MO4OAD0A> ATA-6 disk at ata0-master
ad0: 76319MB (156301488 sectors), 155061 C, 16 H, 63 S, 512 B
ad0: 16 secs/int, 1 depth queue, UDMA100
GEOM: new disk ad0
ar: FreeBSD check1 failed
[0] f:00 typ:7 s(CHS):0/1/1 e(CHS):1023/254/63 s:63 l:102398247
[1] f:80 typ:165 s(CHS):1023/255/63 e(CHS):1023/254/63 s:102398310 l:18426555
[2] f:80 typ:165 s(CHS):1023/255/63 e(CHS):1023/254/63 s:120824865 l:12273660
[3] f:00 typ:5 s(CHS):1023/255/63 e(CHS):1023/254/63 s:133098525 l:23197860
GEOM: Configure ad0s1, start 32256 length 52427902464 end 52427934719
GEOM: Configure ad0s2, start 52427934720 length 9434396160 end 61862330879
GEOM: Configure ad0s3, start 61862330880 length 6284113920 end 68146444799
GEOM: Configure ad0s4, start 68146444800 length 11877304320 end 80023749119
GEOM: Configure ad0s2a, start 0 length 268435456 end 268435455
GEOM: Configure ad0s2b, start 268435456 length 2120499200 end 2388934655
GEOM: Configure ad0s2c, start 0 length 9434396160 end 9434396159
GEOM: Configure ad0s2d, start 2388934656 length 268435456 end 2657370111
GEOM: Configure ad0s2e, start 2657370112 length 268435456 end 2925805567
GEOM: Configure ad0s2f, start 2925805568 length 6508590592 end 9434396159
GEOM: Configure ad0s3a, start 0 length 268435456 end 268435455
GEOM: Configure ad0s3c, start 0 length 6284113920 end 6284113919
GEOM: Configure ad0s3d, start 268435456 length 268435456 end 536870911
GEOM: Configure ad0s3e, start 536870912 length 268435456 end 805306367
GEOM: Configure ad0s3f, start 805306368 length 5478807552 end 6284113919
MBREXT Slice 5 on ad0s4:
[0] f:00 typ:131 s(CHS):1023/254/63 e(CHS):1023/254/63 s:63 l:80262
[1] f:00 typ:5 s(CHS):1023/254/63 e(CHS):1023/254/63 s:80325 l:1012095
GEOM: Configure ad0s5, start 32256 length 41094144 end 41126399
MBREXT Slice 6 on ad0s4:
[0] f:00 typ:131 s(CHS):1023/254/63 e(CHS):1023/254/63 s:63 l:1012032
[1] f:00 typ:5 s(CHS):1023/254/63 e(CHS):1023/254/63 s:1092420 l:22105440
GEOM: Configure ad0s6, start 41158656 length 518160384 end 559319039
MBREXT Slice 7 on ad0s4:
[0] f:00 typ:131 s(CHS):1023/254/63 e(CHS):1023/254/63 s:63 l:22105377
[1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
GEOM: Configure ad0s7, start 559351296 length 11317953024 end 11877304319
ata1: reiniting channel ..
ata1: reset tp1 mask=03 ostat0=00 ostat1=00
ata1-master: stat=0x00 err=0x01 lsb=0x14 msb=0xeb
ata1-slave: stat=0x00 err=0x01 lsb=0x14 msb=0xeb
ata1: reset tp2 stat0=00 stat1=00 devices=0xc<ATAPI_SLAVE,ATAPI_MASTER>
ata1: resetting done ..
ata1: reiniting channel ..
ata1-slave: FAILURE - ATAPI_IDENTIFY timed out
ata1: reiniting channel ..
ata1-slave: FAILURE - ATAPI_IDENTIFY timed out
ata1-master: pio=0x0c wdma=0x22 udma=0x42 cable=40pin
ata1-master: setting PIO4 on Intel ICH4 chip
ata1-master: setting UDMA33 on Intel ICH4 chip
ata1: device config done ..
ata1-slave: FAILURE - ATAPI_IDENTIFY timed out
ata1-master: pio=0x0c wdma=0x22 udma=0x42 cable=40pin
ata1-master: setting PIO4 on Intel ICH4 chip
ata1-master: setting UDMA33 on Intel ICH4 chip
acd0: <MATSHITA CD-RW/DVD-ROM UJDA740/1.03> CDRW drive at ata1 as master
acd0: read 4134KB/s (4134KB/s) write 4134KB/s (4134KB/s), 2048KB buffer, UDMA33
acd0: Reads: CDR, CDRW, CDDA stream, DVDROM, DVDR, DVDRAM, packet
acd0: Writes: CDR, CDRW, test write, burnproof
acd0: Audio: play, 256 volume levels
acd0: Mechanism: ejectable tray, unlocked
acd0: Medium: no/blank disc
(probe0:sbp0:0:0:0): error 22
(probe0:sbp0:0:0:0): Unretryable Error
(probe1:sbp0:0:1:0): error 22
(probe1:sbp0:0:1:0): Unretryable Error
(probe2:sbp0:0:2:0): error 22
(probe2:sbp0:0:2:0): Unretryable Error
(probe3:sbp0:0:3:0): error 22
(probe3:sbp0:0:3:0): Unretryable Error
(probe4:sbp0:0:4:0): error 22
(probe4:sbp0:0:4:0): Unretryable Error
(probe5:sbp0:0:5:0): error 22
(probe5:sbp0:0:5:0): Unretryable Error
(probe6:sbp0:0:6:0): error 22
(probe6:sbp0:0:6:0): Unretryable Error
Mounting root from ufs:/dev/ad0s3a
WARNING: / was not properly dismounted
start_init: trying /sbin/init
Pre-seeding PRNG:
kickstart
.
Loading configuration files.
Entropy harvesting:
interrupts
ethernet
point_to_point
kickstart
.
swapon: adding /dev/ad0s2b as swap device
Starting file system checks:
/dev/ad0s3a: 1635 files, 30820 used, 98099 free (699 frags, 12175 blocks, 0.5% fragmentation)
/dev/ad0s3e: DEFER FOR BACKGROUND CHECKING
/dev/ad0s3f: DEFER FOR BACKGROUND CHECKING
/dev/ad0s3d: DEFER FOR BACKGROUND CHECKING
WARNING: /tmp was not properly dismounted
WARNING: /usr was not properly dismounted
WARNING: /var was not properly dismounted
Setting hostname: prolepsis.mooo.com.
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
inet 127.0.0.1 netmask 0xff000000
inet6 ::1 prefixlen 128
inet6 fe80::1%lo0 prefixlen 64 scopeid 0x4
Starting dhclient.
bfe0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
options=8<VLAN_MTU>
inet6 fe80::20b:dbff:fe99:e8c7%bfe0 prefixlen 64 scopeid 0x1
inet 10.0.1.17 netmask 0xffffff00 broadcast 255.255.255.255
ether 00:0b:db:99:e8:c7
media: Ethernet autoselect (100baseTX <full-duplex>)
status: active
Additional routing options:
.
add net ::ffff:0.0.0.0: gateway ::1
add net ::0.0.0.0: gateway ::1
net.inet6.ip6.forwarding:
0
->
0
net.inet6.ip6.accept_rtadv:
0
->
1
add net fe80::: gateway ::1
add net ff02::: gateway ::1
IPv4 mapped IPv6 address support=NO
Starting devd.
hw.acpi.cpu.cx_lowest:
C1
->
C4
hw.acpi.cpu.throttle_state:
8
->
8
Mounting NFS file systems:
.
Starting syslogd.
Jan 29 16:49:07 prolepsis syslogd: kernel boot file is /boot/kernel/kernel
ELF ldconfig path: /lib /usr/lib /usr/lib/compat /usr/X11R6/lib /usr/local/lib
a.out ldconfig path: /usr/lib/aout /usr/lib/compat/aout /usr/X11R6/lib/aout
Starting usbd.
Starting local daemons:
.
Updating motd
.
Configuring syscons:
blanktime
screensaver
splash: image decoder found: blank_saver
.
Starting sshd.
acpi_cmbat1: battery initialization failed, giving up
Initial i386 initialization:
.
Additional ABI support:
linux
.
Starting cron.
Local package initialization:
.
Additional TCP options:
.
Starting background file system checks in 60 seconds.
Sat Jan 29 16:52:40 CST 2005
Jan 29 16:56:12 prolepsis login: ROOT LOGIN (root) ON ttyv1
help
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?47d0403c05012919264bfdecd1>