Skip site navigation (1)Skip section navigation (2)
Date:      Sat, 22 Oct 2005 14:58:56 +0200
From:      Danny Braniss <danny@cs.huji.ac.il>
To:        "Mike G" <mike@v.gz.ru>
Cc:        current@freebsd.org, sos@freebsd.org
Subject:   Re: ad0: Danger Will Robinson 
Message-ID:  <E1ETIxc-0002U8-U2@cs1.cs.huji.ac.il>
In-Reply-To: Message from "Mike G" <mike@v.gz.ru> of "Fri, 21 Oct 2005 23:28:08 %2B0400." <002601c5d675$92eefa20$6f04000a@v.ru> 

next in thread | previous in thread | raw e-mail | index | archive | help
> Hello!
> 
> We have a problem with FreeBSD RELENG_6
> system has hang up 'cause of lot lof messages:
> ad0: req=0xXXXXXXX SETFEATURES SET TRANSFER MODE semaphore timeout !!
> DANGER Will Robinson !!
> ad0: req=0xXXXXXXX SETFEATURES SET TRANSFER MODE semaphore timeout !!
> DANGER Will Robinson !!
> ad0: req=0xXXXXXXX SETFEATURES SET TRANSFER MODE semaphore timeout !!
> DANGER Will Robinson !!

i got similar messages with an Intel SE7501WV2, in my case
it was caused because i was fiddling with the BIOS.
can't remember exactly which option caused it, but
check memory/pci, and the raid.

btw, is this a nocoma cpu?

danny


> 
> Our system is
> MotherBoard:    Intel SE7520BD2 with 1 Xeon (HyperThreading)
> HDD             :    ad0: 19092MB <Seagate ST320014A 3.07> at ata0-master
> UDMA100
> for details see the full /var/run/dmesg.boot
> 
>  in namespace, AE_BAD_CHARACTER
> SearchNode 0xc2329d60 StartNode 0xc2329d60 ReturnNode 0xc23271c0
>     ACPI-1304: *** Error: Method execution failed [\\_GPE.PXL1] (Node
> 0xc2329d60), AE
> _BAD_CHARACTER
> ioapic0 <Version 2.0> irqs 0-23 on motherboard
> ioapic1 <Version 2.0> irqs 24-47 on motherboard
> ioapic2 <Version 2.0> irqs 48-71 on motherboard
> npx0: [FAST]
> npx0: <math processor> on motherboard
> npx0: INT 16 interface
> acpi0: <A M I OEMRSDT> on motherboard
> acpi0: Power Button (fixed)
> pci_link0: <ACPI PCI Link LNKA> irq 10 on acpi0
> pci_link1: <ACPI PCI Link LNKB> irq 11 on acpi0
> pci_link2: <ACPI PCI Link LNKC> irq 15 on acpi0
> pci_link3: <ACPI PCI Link LNKD> irq 7 on acpi0
> pci_link4: <ACPI PCI Link LNKE> irq 0 on acpi0
> pci_link5: <ACPI PCI Link LNKF> irq 0 on acpi0
> pci_link6: <ACPI PCI Link LNKG> irq 0 on acpi0
> pci_link7: <ACPI PCI Link LNKH> irq 5 on acpi0
> Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
> acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
> cpu0: <ACPI CPU> on acpi0
> acpi_throttle0: <ACPI CPU Throttling> on cpu0
> cpu1: <ACPI CPU> on acpi0
> acpi_throttle1: <ACPI CPU Throttling> on cpu1
> pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
> pci0: <ACPI PCI bus> on pcib0
> pci0: <unknown> at device 0.1 (no driver attached)
> pci0: <base peripheral> at device 1.0 (no driver attached)
> pcib1: <ACPI PCI-PCI bridge> irq 16 at device 2.0 on pci0
> pci1: <ACPI PCI bus> on pcib1
> pcib2: <ACPI PCI-PCI bridge> at device 0.0 on pci1
> pci2: <ACPI PCI bus> on pcib2
> em0: <Intel(R) PRO/1000 Network Connection, Version - 2.1.7> port
> 0xcc80-0xccbf mem 0
> xfcee0000-0xfcefffff,0xfcec0000-0xfcedffff irq 28 at device 2.0 on pci2
> em0: [GIANT-LOCKED]
> em0: Ethernet address: 00:07:e9:14:6a:18
> em0:  Speed:N/A  Duplex:N/A
> em1: <Intel(R) PRO/1000 Network Connection, Version - 2.1.7> port
> 0xcc00-0xcc3f mem 0
> xfce80000-0xfce9ffff,0xfce60000-0xfce7ffff irq 24 at device 3.0 on pci2
> em1: [GIANT-LOCKED]
> em1: Ethernet address: 00:07:e9:14:6e:9d
> em1:  Speed:N/A  Duplex:N/A
> pci1: <base peripheral, interrupt controller> at device 0.1 (no driver
> attached)
> pcib3: <ACPI PCI-PCI bridge> at device 0.2 on pci1
> pci3: <ACPI PCI bus> on pcib3
> pci1: <base peripheral, interrupt controller> at device 0.3 (no driver
> attached)
> pcib4: <ACPI PCI-PCI bridge> irq 16 at device 4.0 on pci0
> pci4: <ACPI PCI bus> on pcib4
> pcib5: <ACPI PCI-PCI bridge> irq 16 at device 5.0 on pci0
> pci5: <ACPI PCI bus> on pcib5
> pci5: <network, ethernet> at device 0.0 (no driver attached)
> pcib6: <ACPI PCI-PCI bridge> irq 16 at device 6.0 on pci0
> pci6: <ACPI PCI bus> on pcib6
> pci0: <serial bus, USB> at device 29.0 (no driver attached)
> pci0: <serial bus, USB> at device 29.1 (no driver attached)
> pci0: <serial bus, USB> at device 29.2 (no driver attached)
> pci0: <serial bus, USB> at device 29.7 (no driver attached)
> pcib7: <ACPI PCI-PCI bridge> at device 30.0 on pci0
> pci7: <ACPI PCI bus> on pcib7
> em2: <Intel(R) PRO/1000 Network Connection, Version - 2.1.7> port
> 0xec80-0xecbf mem 0
> xfebe0000-0xfebfffff irq 16 at device 4.0 on pci7
> em2: [GIANT-LOCKED]
> em2: Ethernet address: 00:04:23:b0:16:58
> em2:  Speed:N/A  Duplex:N/A
> pci7: <display, VGA> at device 12.0 (no driver attached)
> isab0: <PCI-ISA bridge> at device 31.0 on pci0
> isa0: <ISA bus> on isab0
> atapci0: <Intel ICH5 UDMA100 controller> port
> 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xf
> c00-0xfc0f at device 31.1 on pci0
> ata0: <ATA channel 0> on atapci0
> ata1: <ATA channel 1> on atapci0
> pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
> acpi_button0: <Power Button> on acpi0
> acpi_button1: <Sleep Button> on acpi0
> atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
> atkbd0: <AT Keyboard> irq 1 on atkbdc0
> kbd0 at atkbd0
> atkbd0: [GIANT-LOCKED]
> sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on
> acpi0
> sio0: type 16550A
> sio1: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 on acpi0
> sio1: type 16550A
> pmtimer0 on isa0
> orm0: <ISA Option ROMs> at iomem
> 0xc0000-0xca7ff,0xca800-0xcbfff,0xcc000-0xcd7ff on i
> sa0
> sc0: <System console> at flags 0x100 on isa0
> sc0: VGA <16 virtual consoles, flags=0x300>
> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
> Timecounters tick every 1.333 msec
> ipfw2 (+ipv6) initialized, divert loadable, rule-based forwarding enabled,
> default to
>  accept, logging limited to 10000 packets/entry by default
> ad0: 19092MB <Seagate ST320014A 3.07> at ata0-master UDMA100
> SMP: AP CPU #1 Launched!
> Trying to mount root from ufs:/dev/ad0s1a
> WARNING: / was not properly dismounted
> WARNING: /var was not properly dismounted
> /var: mount pending error: blocks 564 files 11
> WARNING: /usr was not properly dismounted
> WARNING: /usr/local was not properly dismounted
> 
> 
> -- 
> Mike G : mike@v.gz.ru
> Moscow State University.
> _______________________________________________
> freebsd-current@freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-current
> To unsubscribe, send any mail to "freebsd-current-unsubscribe@freebsd.org"
> 





Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?E1ETIxc-0002U8-U2>