Skip site navigation (1)Skip section navigation (2)
Date:      16 Feb 2003 14:51:18 -0500
From:      Joe Marcus Clarke <marcus@marcuscom.com>
To:        Evan Dower <evantd@hotmail.com>
Cc:        FreeBSD User Questions List <freebsd-questions@freebsd.org>
Subject:   Re: X/gdm2 increments display number on logout
Message-ID:  <1045425077.39029.2.camel@shumai.marcuscom.com>
In-Reply-To: <F1451epHviECuSOl2Eu00007d0e@hotmail.com>
References:  <F1451epHviECuSOl2Eu00007d0e@hotmail.com>

next in thread | previous in thread | raw e-mail | index | archive | help

--=-tIpTFONuD0AEpvwnFttC
Content-Type: text/plain
Content-Transfer-Encoding: quoted-printable

On Sun, 2003-02-16 at 12:58, Evan Dower wrote:
> When I log out of gnome, I get the following message:
> "The specified display number was busy, so this server was started on=20
> display 1."
> Then, gdm comes up, but I can't type. If I switch from vt8 to vt9, there'=
s=20
> another gdm running and I can type into it. The gdm on vt8 then exits. If=
 I=20
> log in and out again, I get the same message except with the display numb=
er=20
> incremented, and the behavior of vt8 and vt9 are switched (healthy new gd=
m=20
> on vt8, untypible old gdm on vt9). gdm is started from /etc/rc.d/gdm.sh
> I am running:
> FreeBSD lojak.u.washington.edu 5.0-RELEASE FreeBSD 5.0-RELEASE #8: Sat Fe=
b =20
> 1 12:55:11 PST 2003    =20
> root@lojak.u.washington.edu:/usr/obj/usr/src/sys/CUSTOM  i386
> with all the latest gnome2 (including gdm2) and XFree86-4 from ports.
> :0.log and XFree86.0.log are included at the end of this message. The log=
s=20
> for other display numbers look much the same.

You're not the only one seeing this.  It seems to be a simple fact of
the new gdm2.  I haven't been able to isolate why it's happening, but
starting it from /etc/ttys doesn't help it.  This may already be a known
bug with gdm.  Are you running the graphical theme login, or the
standard one?

Joe

>=20
> Thanks in advance,
> Evan Dower
> *******************************************************************
> :0.log
>=20
> Fatal server error:
> Server is already active for display 0
> 	If this server is no longer running, remove /tmp/.X0-lock
> 	and start again.
>=20
>=20
> When reporting a problem related to a server crash, please send
> the full server output, not just the last messages.
> Please report problems to xfree86@xfree86.org.
>=20
> *******************************************************************
> XFree86.0.log
>=20
> XFree86 Version 4.2.1 / X Window System
> (protocol Version 11, revision 0, vendor release 6600)
> Release Date: 3 September 2002
> 	If the server is older than 6-12 months, or if your card is
> 	newer than the above date, look for a newer version before
> 	reporting problems.  (See http://www.XFree86.Org/)
> Build Operating System: FreeBSD 5.0-RELEASE i386 [ELF]
> Module Loader present
> Markers: (--) probed, (**) from config file, (=3D=3D) default setting,
>          (++) from command line, (!!) notice, (II) informational,
>          (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
> (=3D=3D) Log file: "/var/log/XFree86.0.log", Time: Sat Feb 15 08:46:56 20=
03
> (=3D=3D) Using config file: "/etc/X11/XF86Config"
> (=3D=3D) ServerLayout "Simple Layout"
> (**) |-->Screen "Screen 1" (0)
> (**) |   |-->Monitor "My Monitor"
> (**) |   |-->Device "NVIDIA GeForce"
> (**) |-->Input Device "Mouse1"
> (**) |-->Input Device "Keyboard1"
> (**) Option "AutoRepeat" "500 30"
> (**) Option "XkbRules" "xfree86"
> (**) XKB: rules: "xfree86"
> (**) Option "XkbModel" "pc104"
> (**) XKB: model: "pc104"
> (**) Option "XkbLayout" "en_US"
> (**) XKB: layout: "en_US"
> (WW) Option "XkbVariant" requires an string value
> (WW) Option "XkbOptions" requires an string value
> (=3D=3D) Keyboard: CustomKeycode disabled
> (**) FontPath set to=20
> "/usr/X11R6/lib/X11/fonts/local/,/usr/X11R6/lib/X11/fonts/misc/,/usr/X11R=
6/lib/X11/fonts/75dpi/:unscaled,/usr/X11R6/lib/X11/fonts/100dpi/:unscaled,/=
usr/X11R6/lib/X11/fonts/Type1/,/usr/X11R6/lib/X11/fonts/Speedo/,/usr/X11R6/=
lib/X11/fonts/75dpi/,/usr/X11R6/lib/X11/fonts/100dpi/"
> (**) RgbPath set to "/usr/X11R6/lib/X11/rgb"
> (=3D=3D) ModulePath set to "/usr/X11R6/lib/modules"
> (--) Using syscons driver with X support (version 2.0)
> (--) using VT number 9
>=20
> (II) Module ABI versions:
> 	XFree86 ANSI C Emulation: 0.1
> 	XFree86 Video Driver: 0.5
> 	XFree86 XInput driver : 0.3
> 	XFree86 Server Extension : 0.1
> 	XFree86 Font Renderer : 0.3
> (II) Loader running on freebsd
> (II) LoadModule: "bitmap"
> (II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a
> (II) Module bitmap: vendor=3D"The XFree86 Project"
> 	compiled for 4.2.1, module version =3D 1.0.0
> 	Module class: XFree86 Font Renderer
> 	ABI class: XFree86 Font Renderer, version 0.3
> (II) Loading font Bitmap
> (II) LoadModule: "pcidata"
> (II) Loading /usr/X11R6/lib/modules/libpcidata.a
> (II) Module pcidata: vendor=3D"The XFree86 Project"
> 	compiled for 4.2.1, module version =3D 0.1.0
> 	ABI class: XFree86 Video Driver, version 0.5
> (II) PCI: Probing config type using method 1
> (II) PCI: Config type is 1
> (II) PCI: stages =3D 0x03, oldVal1 =3D 0x00000000, mode1Res1 =3D 0x800000=
00
> (II) PCI: PCI scan (all values are in hex)
> (II) PCI: 00:00:0: chip 1022,700c card 0000,0000 rev 11 class 06,00,00 hd=
r=20
> 00
> (II) PCI: 00:01:0: chip 1022,700d card 0000,0000 rev 00 class 06,04,00 hd=
r=20
> 01
> (II) PCI: 00:07:0: chip 1022,7440 card 1043,8044 rev 04 class 06,01,00 hd=
r=20
> 80
> (II) PCI: 00:07:1: chip 1022,7441 card 1022,7441 rev 04 class 01,01,8a hd=
r=20
> 00
> (II) PCI: 00:07:3: chip 1022,7443 card 1043,8044 rev 03 class 06,80,00 hd=
r=20
> 00
> (II) PCI: 00:10:0: chip 1022,7448 card 0000,0000 rev 04 class 06,04,00 hd=
r=20
> 01
> (II) PCI: 01:05:0: chip 10de,0201 card 0000,0000 rev a3 class 03,00,00 hd=
r=20
> 00
> (II) PCI: 02:05:0: chip 1102,0002 card 1102,8027 rev 07 class 04,01,00 hd=
r=20
> 80
> (II) PCI: 02:05:1: chip 1102,7002 card 1102,0020 rev 07 class 09,80,00 hd=
r=20
> 80
> (II) PCI: 02:06:0: chip 10ec,8139 card 10ec,8139 rev 10 class 02,00,00 hd=
r=20
> 00
> (II) PCI: 02:08:0: chip 1033,0035 card 807d,0035 rev 41 class 0c,03,10 hd=
r=20
> 80
> (II) PCI: 02:08:1: chip 1033,0035 card 807d,0035 rev 41 class 0c,03,10 hd=
r=20
> 00
> (II) PCI: 02:08:2: chip 1033,00e0 card 807d,1043 rev 02 class 0c,03,20 hd=
r=20
> 00
>=20
> (II) PCI: End of PCI scan
> (II) LoadModule: "scanpci"
> (II) Loading /usr/X11R6/lib/modules/libscanpci.a
> (II) Module scanpci: vendor=3D"The XFree86 Project"
> 	compiled for 4.2.1, module version =3D 0.1.0
> 	ABI class: XFree86 Video Driver, version 0.5
> (II) UnloadModule: "scanpci"
> (II) Unloading /usr/X11R6/lib/modules/libscanpci.a
> (II) Host-to-PCI bridge:
> (II) PCI-to-ISA bridge:
> (II) PCI-to-PCI bridge:
> (II) PCI-to-PCI bridge:
> (II) Bus 0: bridge is at (0:0:0), (-1,0,0), BCTRL: 0x08 (VGA_EN is set)
> (II) Bus 0 I/O range:
> 	[0] -1	0x00000000 - 0x0000ffff (0x10000) IX[B]
> (II) Bus 0 non-prefetchable memory range:
> 	[0] -1	0x00000000 - 0xffffffff (0x0) MX[B]
> (II) Bus 0 prefetchable memory range:
> 	[0] -1	0x00000000 - 0xffffffff (0x0) MX[B]
> (II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x08 (VGA_EN is set)
> (II) Bus 1 I/O range:
> (II) Bus 1 non-prefetchable memory range:
> 	[0] -1	0xf2000000 - 0xf35fffff (0x1600000) MX[B]
> (II) Bus 1 prefetchable memory range:
> 	[0] -1	0xf3700000 - 0xfb7fffff (0x8100000) MX[B]
> (II) Bus -1: bridge is at (0:7:0), (0,-1,0), BCTRL: 0x08 (VGA_EN is set)
> (II) Bus -1 I/O range:
> (II) Bus -1 non-prefetchable memory range:
> (II) Bus -1 prefetchable memory range:
> (II) Bus 2: bridge is at (0:16:0), (0,2,2), BCTRL: 0x04 (VGA_EN is cleare=
d)
> (II) Bus 2 I/O range:
> 	[0] -1	0x0000c000 - 0x0000c0ff (0x100) IX[B]
> 	[1] -1	0x0000c400 - 0x0000c4ff (0x100) IX[B]
> 	[2] -1	0x0000c800 - 0x0000c8ff (0x100) IX[B]
> 	[3] -1	0x0000cc00 - 0x0000ccff (0x100) IX[B]
> (II) Bus 2 non-prefetchable memory range:
> 	[0] -1	0xef800000 - 0xf1ffffff (0x2800000) MX[B]
> (II) Bus 2 prefetchable memory range:
> 	[0] -1	0xf3600000 - 0xf36fffff (0x100000) MX[B]
> (--) PCI:*(1:5:0) NVidia GeForce3 Ti 200 rev 163, Mem @ 0xf2000000/24,=20
> 0xf4000000/26, 0xf3800000/19, BIOS @ 0xf37f0000/16
> (II) Addressable bus resource ranges are
> 	[0] -1	0x00000000 - 0xffffffff (0x0) MX[B]
> 	[1] -1	0x00000000 - 0x0000ffff (0x10000) IX[B]
> (II) OS-reported resource ranges:
> 	[0] -1	0xffe00000 - 0xffffffff (0x200000) MX[B](B)
> 	[1] -1	0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
> 	[2] -1	0x000f0000 - 0x000fffff (0x10000) MX[B]
> 	[3] -1	0x000c0000 - 0x000effff (0x30000) MX[B]
> 	[4] -1	0x00000000 - 0x0009ffff (0xa0000) MX[B]
> 	[5] -1	0x0000ffff - 0x0000ffff (0x1) IX[B]
> 	[6] -1	0x00000000 - 0x000000ff (0x100) IX[B]
> (II) Active PCI resource ranges:
> 	[0] -1	0xef800000 - 0xefffffff (0x800000) MX[B]E
> 	[1] -1	0xf0000000 - 0xffffffff (0x10000000) MX[B]E
> 	[2] -1	0xf0800000 - 0xf0ffffff (0x800000) MX[B]E
> 	[3] -1	0xf1000000 - 0xf1ffffff (0x1000000) MX[B]E
> 	[4] -1	0xfb800000 - 0xfbffffff (0x800000) MX[B]E
> 	[5] -1	0xfc000000 - 0xffffffff (0x4000000) MX[B]E
> 	[6] -1	0xf37f0000 - 0xf37fffff (0x10000) MX[B](B)
> 	[7] -1	0xf3800000 - 0xf387ffff (0x80000) MX[B](B)
> 	[8] -1	0xf4000000 - 0xf7ffffff (0x4000000) MX[B](B)
> 	[9] -1	0xf2000000 - 0xf2ffffff (0x1000000) MX[B](B)
> 	[10] -1	0x0000c000 - 0x0000c0ff (0x100) IX[B]E
> 	[11] -1	0x0000c400 - 0x0000c4ff (0x100) IX[B]E
> 	[12] -1	0x0000c800 - 0x0000c8ff (0x100) IX[B]E
> 	[13] -1	0x0000d800 - 0x0000d8ff (0x100) IX[B]E
> 	[14] -1	0x0000e800 - 0x0000e8ff (0x100) IX[B]E
> (II) PCI Memory resource overlap reduced 0xf0000000 from 0xffffffff to=20
> 0xf07fffff
> (II) Active PCI resource ranges after removing overlaps:
> 	[0] -1	0xef800000 - 0xefffffff (0x800000) MX[B]E
> 	[1] -1	0xf0000000 - 0xf07fffff (0x800000) MX[B]E
> 	[2] -1	0xf0800000 - 0xf0ffffff (0x800000) MX[B]E
> 	[3] -1	0xf1000000 - 0xf1ffffff (0x1000000) MX[B]E
> 	[4] -1	0xfb800000 - 0xfbffffff (0x800000) MX[B]E
> 	[5] -1	0xfc000000 - 0xffffffff (0x4000000) MX[B]E
> 	[6] -1	0xf37f0000 - 0xf37fffff (0x10000) MX[B](B)
> 	[7] -1	0xf3800000 - 0xf387ffff (0x80000) MX[B](B)
> 	[8] -1	0xf4000000 - 0xf7ffffff (0x4000000) MX[B](B)
> 	[9] -1	0xf2000000 - 0xf2ffffff (0x1000000) MX[B](B)
> 	[10] -1	0x0000c000 - 0x0000c0ff (0x100) IX[B]E
> 	[11] -1	0x0000c400 - 0x0000c4ff (0x100) IX[B]E
> 	[12] -1	0x0000c800 - 0x0000c8ff (0x100) IX[B]E
> 	[13] -1	0x0000d800 - 0x0000d8ff (0x100) IX[B]E
> 	[14] -1	0x0000e800 - 0x0000e8ff (0x100) IX[B]E
> (II) OS-reported resource ranges after removing overlaps with PCI:
> 	[0] -1	0xffe00000 - 0xffffffff (0x200000) MX[B](B)
> 	[1] -1	0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
> 	[2] -1	0x000f0000 - 0x000fffff (0x10000) MX[B]
> 	[3] -1	0x000c0000 - 0x000effff (0x30000) MX[B]
> 	[4] -1	0x00000000 - 0x0009ffff (0xa0000) MX[B]
> 	[5] -1	0x0000ffff - 0x0000ffff (0x1) IX[B]
> 	[6] -1	0x00000000 - 0x000000ff (0x100) IX[B]
> (II) All system resource ranges:
> 	[0] -1	0xffe00000 - 0xffffffff (0x200000) MX[B](B)
> 	[1] -1	0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
> 	[2] -1	0x000f0000 - 0x000fffff (0x10000) MX[B]
> 	[3] -1	0x000c0000 - 0x000effff (0x30000) MX[B]
> 	[4] -1	0x00000000 - 0x0009ffff (0xa0000) MX[B]
> 	[5] -1	0xef800000 - 0xefffffff (0x800000) MX[B]E
> 	[6] -1	0xf0000000 - 0xf07fffff (0x800000) MX[B]E
> 	[7] -1	0xf0800000 - 0xf0ffffff (0x800000) MX[B]E
> 	[8] -1	0xf1000000 - 0xf1ffffff (0x1000000) MX[B]E
> 	[9] -1	0xfb800000 - 0xfbffffff (0x800000) MX[B]E
> 	[10] -1	0xfc000000 - 0xffffffff (0x4000000) MX[B]E
> 	[11] -1	0xf37f0000 - 0xf37fffff (0x10000) MX[B](B)
> 	[12] -1	0xf3800000 - 0xf387ffff (0x80000) MX[B](B)
> 	[13] -1	0xf4000000 - 0xf7ffffff (0x4000000) MX[B](B)
> 	[14] -1	0xf2000000 - 0xf2ffffff (0x1000000) MX[B](B)
> 	[15] -1	0x0000ffff - 0x0000ffff (0x1) IX[B]
> 	[16] -1	0x00000000 - 0x000000ff (0x100) IX[B]
> 	[17] -1	0x0000c000 - 0x0000c0ff (0x100) IX[B]E
> 	[18] -1	0x0000c400 - 0x0000c4ff (0x100) IX[B]E
> 	[19] -1	0x0000c800 - 0x0000c8ff (0x100) IX[B]E
> 	[20] -1	0x0000d800 - 0x0000d8ff (0x100) IX[B]E
> 	[21] -1	0x0000e800 - 0x0000e8ff (0x100) IX[B]E
> (II) LoadModule: "dbe"
> (II) Loading /usr/X11R6/lib/modules/extensions/libdbe.a
> (II) Module dbe: vendor=3D"The XFree86 Project"
> 	compiled for 4.2.1, module version =3D 1.0.0
> 	Module class: XFree86 Server Extension
> 	ABI class: XFree86 Server Extension, version 0.1
> (II) Loading extension DOUBLE-BUFFER
> (II) LoadModule: "extmod"
> (II) Loading /usr/X11R6/lib/modules/extensions/libextmod.a
> (II) Module extmod: vendor=3D"The XFree86 Project"
> 	compiled for 4.2.1, module version =3D 1.0.0
> 	Module class: XFree86 Server Extension
> 	ABI class: XFree86 Server Extension, version 0.1
> (II) Loading extension SHAPE
> (II) Loading extension MIT-SUNDRY-NONSTANDARD
> (II) Loading extension BIG-REQUESTS
> (II) Loading extension SYNC
> (II) Loading extension MIT-SCREEN-SAVER
> (II) Loading extension XC-MISC
> (II) Loading extension XFree86-VidModeExtension
> (II) Loading extension XFree86-Misc
> (II) Loading extension XFree86-DGA
> (II) Loading extension DPMS
> (II) Loading extension FontCache
> (II) Loading extension TOG-CUP
> (II) Loading extension Extended-Visual-Information
> (II) Loading extension XVideo
> (II) Loading extension XVideo-MotionCompensation
> (II) LoadModule: "type1"
> (II) Loading /usr/X11R6/lib/modules/fonts/libtype1.a
> (II) Module type1: vendor=3D"The XFree86 Project"
> 	compiled for 4.2.1, module version =3D 1.0.1
> 	Module class: XFree86 Font Renderer
> 	ABI class: XFree86 Font Renderer, version 0.3
> (II) Loading font Type1
> (II) Loading font CID
> (II) LoadModule: "freetype"
> (II) Loading /usr/X11R6/lib/modules/fonts/libfreetype.a
> (II) Module freetype: vendor=3D"The XFree86 Project"
> 	compiled for 4.2.1, module version =3D 1.1.10
> 	Module class: XFree86 Font Renderer
> 	ABI class: XFree86 Font Renderer, version 0.3
> (II) Loading font FreeType
> (II) LoadModule: "glx"
> (II) Loading /usr/X11R6/lib/modules/extensions/libglx.a
> (II) Module glx: vendor=3D"The XFree86 Project"
> 	compiled for 4.2.1, module version =3D 1.0.0
> 	ABI class: XFree86 Server Extension, version 0.1
> (II) Loading sub module "GLcore"
> (II) LoadModule: "GLcore"
> (II) Loading /usr/X11R6/lib/modules/extensions/libGLcore.a
> (II) Module GLcore: vendor=3D"The XFree86 Project"
> 	compiled for 4.2.1, module version =3D 1.0.0
> 	ABI class: XFree86 Server Extension, version 0.1
> (II) Loading extension GLX
> (II) LoadModule: "bitmap"
> (II) Reloading /usr/X11R6/lib/modules/fonts/libbitmap.a
> (II) Loading font Bitmap
> (II) LoadModule: "dri"
> (II) Loading /usr/X11R6/lib/modules/extensions/libdri.a
> (II) Module dri: vendor=3D"The XFree86 Project"
> 	compiled for 4.2.1, module version =3D 1.0.0
> 	ABI class: XFree86 Server Extension, version 0.1
> (II) Loading sub module "drm"
> (II) LoadModule: "drm"
> (II) Loading /usr/X11R6/lib/modules/freebsd/libdrm.a
> (II) Module drm: vendor=3D"The XFree86 Project"
> 	compiled for 4.2.1, module version =3D 1.0.0
> 	ABI class: XFree86 Server Extension, version 0.1
> (II) Loading extension XFree86-DRI
> (II) LoadModule: "GLcore"
> (II) Reloading /usr/X11R6/lib/modules/extensions/libGLcore.a
> (II) LoadModule: "nv"
> (II) Loading /usr/X11R6/lib/modules/drivers/nv_drv.o
> (II) Module nv: vendor=3D"The XFree86 Project"
> 	compiled for 4.2.1, module version =3D 1.0.1
> 	Module class: XFree86 Video Driver
> 	ABI class: XFree86 Video Driver, version 0.5
> (II) LoadModule: "mouse"
> (II) Loading /usr/X11R6/lib/modules/input/mouse_drv.o
> (II) Module mouse: vendor=3D"The XFree86 Project"
> 	compiled for 4.2.1, module version =3D 1.0.0
> 	Module class: XFree86 XInput Driver
> 	ABI class: XFree86 XInput driver, version 0.3
> (II) NV: driver for NVIDIA chipsets: RIVA128, RIVA TNT, RIVA TNT2,
> 	RIVA TNT2 Ultra, Vanta, RIVA TNT2 M64, Aladdin TNT2, GeForce 256,
> 	GeForce DDR, Quadro, GeForce2 GTS/Pro, GeForce2 Ti, GeForce2 Ultra,
> 	Quadro2 Pro, GeForce2 MX/MX 400, GeForce2 MX 100/200,
> 	GeForce4 MX 460, GeForce4 MX 440, GeForce4 MX 420, 0x0173, 0x0174,
> 	0x0175, Quadro4 500/550 XGL, Quadro4 200/400 NVS, 0x017B, 0x017C,
> 	GeForce2 Integrated, Quadro2 MXR, GeForce2 Go, GeForce3,
> 	GeForce3 Ti 200, GeForce3 Ti 500, Quadro DDC, GeForce4 Ti 4600,
> 	GeForce4 Ti 4400, GeForce4 Ti 4200, Quadro4 900 XGL, Quadro4 750 XGL,
> 	Quadro4 700 XGL
> (II) Primary Device is: PCI 01:05:0
> (--) Assigning device section with no busID to primary device
> (--) Chipset GeForce3 Ti 200 found
> (II) resource ranges after xf86ClaimFixedResources() call:
> 	[0] -1	0xffe00000 - 0xffffffff (0x200000) MX[B](B)
> 	[1] -1	0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
> 	[2] -1	0x000f0000 - 0x000fffff (0x10000) MX[B]
> 	[3] -1	0x000c0000 - 0x000effff (0x30000) MX[B]
> 	[4] -1	0x00000000 - 0x0009ffff (0xa0000) MX[B]
> 	[5] -1	0xef800000 - 0xefffffff (0x800000) MX[B]E
> 	[6] -1	0xf0000000 - 0xf07fffff (0x800000) MX[B]E
> 	[7] -1	0xf0800000 - 0xf0ffffff (0x800000) MX[B]E
> 	[8] -1	0xf1000000 - 0xf1ffffff (0x1000000) MX[B]E
> 	[9] -1	0xfb800000 - 0xfbffffff (0x800000) MX[B]E
> 	[10] -1	0xfc000000 - 0xffffffff (0x4000000) MX[B]E
> 	[11] -1	0xf37f0000 - 0xf37fffff (0x10000) MX[B](B)
> 	[12] -1	0xf3800000 - 0xf387ffff (0x80000) MX[B](B)
> 	[13] -1	0xf4000000 - 0xf7ffffff (0x4000000) MX[B](B)
> 	[14] -1	0xf2000000 - 0xf2ffffff (0x1000000) MX[B](B)
> 	[15] -1	0x0000ffff - 0x0000ffff (0x1) IX[B]
> 	[16] -1	0x00000000 - 0x000000ff (0x100) IX[B]
> 	[17] -1	0x0000c000 - 0x0000c0ff (0x100) IX[B]E
> 	[18] -1	0x0000c400 - 0x0000c4ff (0x100) IX[B]E
> 	[19] -1	0x0000c800 - 0x0000c8ff (0x100) IX[B]E
> 	[20] -1	0x0000d800 - 0x0000d8ff (0x100) IX[B]E
> 	[21] -1	0x0000e800 - 0x0000e8ff (0x100) IX[B]E
> (II) resource ranges after probing:
> 	[0] -1	0xffe00000 - 0xffffffff (0x200000) MX[B](B)
> 	[1] -1	0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
> 	[2] -1	0x000f0000 - 0x000fffff (0x10000) MX[B]
> 	[3] -1	0x000c0000 - 0x000effff (0x30000) MX[B]
> 	[4] -1	0x00000000 - 0x0009ffff (0xa0000) MX[B]
> 	[5] -1	0xef800000 - 0xefffffff (0x800000) MX[B]E
> 	[6] -1	0xf0000000 - 0xf07fffff (0x800000) MX[B]E
> 	[7] -1	0xf0800000 - 0xf0ffffff (0x800000) MX[B]E
> 	[8] -1	0xf1000000 - 0xf1ffffff (0x1000000) MX[B]E
> 	[9] -1	0xfb800000 - 0xfbffffff (0x800000) MX[B]E
> 	[10] -1	0xfc000000 - 0xffffffff (0x4000000) MX[B]E
> 	[11] -1	0xf37f0000 - 0xf37fffff (0x10000) MX[B](B)
> 	[12] -1	0xf3800000 - 0xf387ffff (0x80000) MX[B](B)
> 	[13] -1	0xf4000000 - 0xf7ffffff (0x4000000) MX[B](B)
> 	[14] -1	0xf2000000 - 0xf2ffffff (0x1000000) MX[B](B)
> 	[15] 0	0x000a0000 - 0x000affff (0x10000) MS[B]
> 	[16] 0	0x000b0000 - 0x000b7fff (0x8000) MS[B]
> 	[17] 0	0x000b8000 - 0x000bffff (0x8000) MS[B]
> 	[18] -1	0x0000ffff - 0x0000ffff (0x1) IX[B]
> 	[19] -1	0x00000000 - 0x000000ff (0x100) IX[B]
> 	[20] -1	0x0000c000 - 0x0000c0ff (0x100) IX[B]E
> 	[21] -1	0x0000c400 - 0x0000c4ff (0x100) IX[B]E
> 	[22] -1	0x0000c800 - 0x0000c8ff (0x100) IX[B]E
> 	[23] -1	0x0000d800 - 0x0000d8ff (0x100) IX[B]E
> 	[24] -1	0x0000e800 - 0x0000e8ff (0x100) IX[B]E
> 	[25] 0	0x000003b0 - 0x000003bb (0xc) IS[B]
> 	[26] 0	0x000003c0 - 0x000003df (0x20) IS[B]
> (II) Setting vga for screen 0.
> (II) Loading sub module "int10"
> (II) LoadModule: "int10"
> (II) Loading /usr/X11R6/lib/modules/libint10.a
> (II) Module int10: vendor=3D"The XFree86 Project"
> 	compiled for 4.2.1, module version =3D 1.0.0
> 	ABI class: XFree86 Video Driver, version 0.5
> (II) NV(0): Initializing int10
> (=3D=3D) NV(0): Write-combining range (0xa0000,0x20000) was already clear
> (=3D=3D) NV(0): Write-combining range (0xf0000,0x10000)
> (II) NV(0): Primary V_BIOS segment is: 0xc000
> (--) NV(0): Chipset: "GeForce3 Ti 200"
> (**) NV(0): Depth 24, (--) framebuffer bpp 32
> (=3D=3D) NV(0): RGB weight 888
> (=3D=3D) NV(0): Default visual is TrueColor
> (II) Loading sub module "vgahw"
> (II) LoadModule: "vgahw"
> (II) Loading /usr/X11R6/lib/modules/libvgahw.a
> (II) Module vgahw: vendor=3D"The XFree86 Project"
> 	compiled for 4.2.1, module version =3D 0.1.0
> 	ABI class: XFree86 Video Driver, version 0.5
> (=3D=3D) NV(0): Using HW cursor
> (--) NV(0): Linear framebuffer at 0xF4000000
> (--) NV(0): MMIO registers at 0xF2000000
> (=3D=3D) NV(0): Write-combining range (0xf2710000,0x10000) was already cl=
ear
> (=3D=3D) NV(0): Write-combining range (0xf2600000,0x1000) was already cle=
ar
> (=3D=3D) NV(0): Write-combining range (0xf2680000,0x3000) was already cle=
ar
> (=3D=3D) NV(0): Write-combining range (0xf2100000,0x1000) was already cle=
ar
> (=3D=3D) NV(0): Write-combining range (0xf2002000,0x2000) was already cle=
ar
> (=3D=3D) NV(0): Write-combining range (0xf2400000,0x2000) was already cle=
ar
> (=3D=3D) NV(0): Write-combining range (0xf2101000,0x1000) was already cle=
ar
> (=3D=3D) NV(0): Write-combining range (0xf2009000,0x1000) was already cle=
ar
> (=3D=3D) NV(0): Write-combining range (0xf2000000,0x9000) was already cle=
ar
> (=3D=3D) NV(0): Write-combining range (0xf2800000,0x10000) was already cl=
ear
> (=3D=3D) NV(0): Write-combining range (0xf2601000,0x1000) was already cle=
ar
> (=3D=3D) NV(0): Write-combining range (0xf2681000,0x1000) was already cle=
ar
> (=3D=3D) NV(0): Write-combining range (0xf20c0000,0x1000) was already cle=
ar
> (--) NV(0): VideoRAM: 65536 kBytes
> (II) Loading sub module "ddc"
> (II) LoadModule: "ddc"
> (II) Loading /usr/X11R6/lib/modules/libddc.a
> (II) Module ddc: vendor=3D"The XFree86 Project"
> 	compiled for 4.2.1, module version =3D 1.0.0
> 	ABI class: XFree86 Video Driver, version 0.5
> (=3D=3D) NV(0): Write-combining range (0xa0000,0x10000) was already clear
> (II) Loading sub module "i2c"
> (II) LoadModule: "i2c"
> (II) Loading /usr/X11R6/lib/modules/libi2c.a
> (II) Module i2c: vendor=3D"The XFree86 Project"
> 	compiled for 4.2.1, module version =3D 1.2.0
> 	ABI class: XFree86 Video Driver, version 0.5
> (II) NV(0): I2C bus "DDC" initialized.
> (II) NV(0): I2C device "DDC:ddc2" registered.
> (II) NV(0): I2C device "DDC:ddc2" removed.
> (=3D=3D) NV(0): Write-combining range (0xa0000,0x10000) was already clear
> (=3D=3D) NV(0): Using gamma correction (1.0, 1.0, 1.0)
> (II) NV(0): My Monitor: Using hsync range of 30.00-54.00 kHz
> (II) NV(0): My Monitor: Using vrefresh range of 50.00-150.00 Hz
> (II) NV(0): Clock range:  12.00 to 350.00 MHz
> (II) NV(0): Not using default mode "1024x768" (bad mode=20
> clock/interlace/doublescan)
> (II) NV(0): Not using default mode "512x384" (bad mode=20
> clock/interlace/doublescan)
> (II) NV(0): Not using default mode "1024x768" (hsync out of range)
> (II) NV(0): Not using default mode "512x384" (hsync out of range)
> (II) NV(0): Not using default mode "1024x768" (hsync out of range)
> (II) NV(0): Not using default mode "512x384" (hsync out of range)
> (II) NV(0): Not using default mode "1024x768" (hsync out of range)
> (II) NV(0): Not using default mode "512x384" (hsync out of range)
> (II) NV(0): Not using default mode "1152x864" (hsync out of range)
> (II) NV(0): Not using default mode "576x432" (hsync out of range)
> (II) NV(0): Not using default mode "1280x960" (hsync out of range)
> (II) NV(0): Not using default mode "640x480" (hsync out of range)
> (II) NV(0): Not using default mode "1280x960" (hsync out of range)
> (II) NV(0): Not using default mode "640x480" (hsync out of range)
> (II) NV(0): Not using default mode "1280x1024" (hsync out of range)
> (II) NV(0): Not using default mode "640x512" (hsync out of range)
> (II) NV(0): Not using default mode "1280x1024" (hsync out of range)
> (II) NV(0): Not using default mode "640x512" (hsync out of range)
> (II) NV(0): Not using default mode "1280x1024" (hsync out of range)
> (II) NV(0): Not using default mode "640x512" (hsync out of range)
> (II) NV(0): Not using default mode "1600x1200" (hsync out of range)
> (II) NV(0): Not using default mode "800x600" (hsync out of range)
> (II) NV(0): Not using default mode "1600x1200" (hsync out of range)
> (II) NV(0): Not using default mode "800x600" (hsync out of range)
> (II) NV(0): Not using default mode "1600x1200" (hsync out of range)
> (II) NV(0): Not using default mode "800x600" (hsync out of range)
> (II) NV(0): Not using default mode "1600x1200" (hsync out of range)
> (II) NV(0): Not using default mode "800x600" (hsync out of range)
> (II) NV(0): Not using default mode "1600x1200" (hsync out of range)
> (II) NV(0): Not using default mode "800x600" (hsync out of range)
> (II) NV(0): Not using default mode "1792x1344" (hsync out of range)
> (II) NV(0): Not using default mode "896x672" (hsync out of range)
> (II) NV(0): Not using default mode "1792x1344" (hsync out of range)
> (II) NV(0): Not using default mode "896x672" (hsync out of range)
> (II) NV(0): Not using default mode "1856x1392" (hsync out of range)
> (II) NV(0): Not using default mode "928x696" (hsync out of range)
> (II) NV(0): Not using default mode "1856x1392" (hsync out of range)
> (II) NV(0): Not using default mode "928x696" (hsync out of range)
> (II) NV(0): Not using default mode "1920x1440" (hsync out of range)
> (II) NV(0): Not using default mode "960x720" (hsync out of range)
> (II) NV(0): Not using default mode "1920x1440" (hsync out of range)
> (II) NV(0): Not using default mode "960x720" (hsync out of range)
> (II) NV(0): Not using default mode "1400x1050" (hsync out of range)
> (II) NV(0): Not using default mode "700x525" (hsync out of range)
> (II) NV(0): Not using default mode "1400x1050" (hsync out of range)
> (II) NV(0): Not using default mode "700x525" (hsync out of range)
> (II) NV(0): Not using default mode "1600x1024" (hsync out of range)
> (II) NV(0): Not using default mode "800x512" (hsync out of range)
> (--) NV(0): Virtual size is 1024x768 (pitch 1024)
> (**) NV(0): Default mode "1024x768": 65.0 MHz, 48.4 kHz, 60.0 Hz
> (II) NV(0): Modeline "1024x768"   65.00  1024 1048 1184 1344  768 771 777=
=20
> 806 -hsync -vsync
> (**) NV(0): Default mode "800x600": 56.3 MHz, 53.7 kHz, 85.1 Hz
> (II) NV(0): Modeline "800x600"   56.30  800 832 896 1048  600 601 604 631=
=20
> +hsync +vsync
> (**) NV(0): Default mode "640x480": 36.0 MHz, 43.3 kHz, 85.0 Hz
> (II) NV(0): Modeline "640x480"   36.00  640 696 752 832  480 481 484 509=20
> -hsync -vsync
> (=3D=3D) NV(0): DPI set to (75, 75)
> (II) Loading sub module "fb"
> (II) LoadModule: "fb"
> (II) Loading /usr/X11R6/lib/modules/libfb.a
> (II) Module fb: vendor=3D"The XFree86 Project"
> 	compiled for 4.2.1, module version =3D 1.0.0
> 	ABI class: XFree86 ANSI C Emulation, version 0.1
> (II) Loading sub module "xaa"
> (II) LoadModule: "xaa"
> (II) Loading /usr/X11R6/lib/modules/libxaa.a
> (II) Module xaa: vendor=3D"The XFree86 Project"
> 	compiled for 4.2.1, module version =3D 1.0.0
> 	ABI class: XFree86 Video Driver, version 0.5
> (II) Loading sub module "ramdac"
> (II) LoadModule: "ramdac"
> (II) Loading /usr/X11R6/lib/modules/libramdac.a
> (II) Module ramdac: vendor=3D"The XFree86 Project"
> 	compiled for 4.2.1, module version =3D 0.1.0
> 	ABI class: XFree86 Video Driver, version 0.5
> (--) Depth 24 pixmap format is 32 bpp
> (II) do I need RAC?  No, I don't.
> (II) resource ranges after preInit:
> 	[0] 0	0xf3800000 - 0xf387ffff (0x80000) MX[B]
> 	[1] 0	0xf4000000 - 0xf7ffffff (0x4000000) MX[B]
> 	[2] 0	0xf2000000 - 0xf2ffffff (0x1000000) MX[B]
> 	[3] -1	0xffe00000 - 0xffffffff (0x200000) MX[B](B)
> 	[4] -1	0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
> 	[5] -1	0x000f0000 - 0x000fffff (0x10000) MX[B]
> 	[6] -1	0x000c0000 - 0x000effff (0x30000) MX[B]
> 	[7] -1	0x00000000 - 0x0009ffff (0xa0000) MX[B]
> 	[8] -1	0xef800000 - 0xefffffff (0x800000) MX[B]E
> 	[9] -1	0xf0000000 - 0xf07fffff (0x800000) MX[B]E
> 	[10] -1	0xf0800000 - 0xf0ffffff (0x800000) MX[B]E
> 	[11] -1	0xf1000000 - 0xf1ffffff (0x1000000) MX[B]E
> 	[12] -1	0xfb800000 - 0xfbffffff (0x800000) MX[B]E
> 	[13] -1	0xfc000000 - 0xffffffff (0x4000000) MX[B]E
> 	[14] -1	0xf37f0000 - 0xf37fffff (0x10000) MX[B](B)
> 	[15] -1	0xf3800000 - 0xf387ffff (0x80000) MX[B](B)
> 	[16] -1	0xf4000000 - 0xf7ffffff (0x4000000) MX[B](B)
> 	[17] -1	0xf2000000 - 0xf2ffffff (0x1000000) MX[B](B)
> 	[18] 0	0x000a0000 - 0x000affff (0x10000) MS[B](OprD)
> 	[19] 0	0x000b0000 - 0x000b7fff (0x8000) MS[B](OprD)
> 	[20] 0	0x000b8000 - 0x000bffff (0x8000) MS[B](OprD)
> 	[21] -1	0x0000ffff - 0x0000ffff (0x1) IX[B]
> 	[22] -1	0x00000000 - 0x000000ff (0x100) IX[B]
> 	[23] -1	0x0000c000 - 0x0000c0ff (0x100) IX[B]E
> 	[24] -1	0x0000c400 - 0x0000c4ff (0x100) IX[B]E
> 	[25] -1	0x0000c800 - 0x0000c8ff (0x100) IX[B]E
> 	[26] -1	0x0000d800 - 0x0000d8ff (0x100) IX[B]E
> 	[27] -1	0x0000e800 - 0x0000e8ff (0x100) IX[B]E
> 	[28] 0	0x000003b0 - 0x000003bb (0xc) IS[B](OprU)
> 	[29] 0	0x000003c0 - 0x000003df (0x20) IS[B](OprU)
> (=3D=3D) NV(0): Write-combining range (0xf2000000,0x1000000) was already =
clear
> (=3D=3D) NV(0): Write-combining range (0xf4000000,0x4000000)
> (=3D=3D) NV(0): Write-combining range (0xa0000,0x10000) was already clear
> (II) NV(0): Using XFree86 Acceleration Architecture (XAA)
> 	Screen to screen bit blits
> 	Solid filled rectangles
> 	8x8 mono pattern filled rectangles
> 	Indirect CPU to Screen color expansion
> 	Solid Lines
> 	Offscreen Pixmaps
> 	Setting up tile and stipple cache:
> 		32 128x128 slots
> 		32 256x256 slots
> 		16 512x512 slots
> (=3D=3D) NV(0): Backing store disabled
> (=3D=3D) NV(0): Silken mouse enabled
> (II) Initializing built-in extension MIT-SHM
> (II) Initializing built-in extension XInputExtension
> (II) Initializing built-in extension XTEST
> (II) Initializing built-in extension XKEYBOARD
> (II) Initializing built-in extension LBX
> (II) Initializing built-in extension XC-APPGROUP
> (II) Initializing built-in extension SECURITY
> (II) Initializing built-in extension XINERAMA
> (II) Initializing built-in extension XFree86-Bigfont
> (II) Initializing built-in extension RENDER
> (**) Option "Protocol" "auto"
> (**) Mouse1: Protocol: "auto"
> (**) Option "CorePointer"
> (**) Mouse1: Core Pointer
> (**) Option "Device" "/dev/sysmouse"
> (**) Option "Buttons" "5"
> (**) Mouse1: Buttons: 5
> (II) Keyboard "Keyboard1" handled by legacy driver
> (II) XINPUT: Adding extended input device "Mouse1" (type: MOUSE)
> (II) Mouse1: SetupAuto: hw.iftype is 4, hw.model is 0
> (II) Mouse1: SetupAuto: protocol is SysMouse
> (**) Option "BaudRate" "1200"
> Could not init font path element /usr/X11R6/lib/X11/fonts/Speedo/, removi=
ng=20
> from list!
> GetModeLine - scrn: 0 clock: 65000
> GetModeLine - hdsp: 1024 hbeg: 1048 hend: 1184 httl: 1344
>               vdsp: 768 vbeg: 771 vend: 777 vttl: 806 flags: 10
> (=3D=3D) NV(0): Write-combining range (0xf2000000,0x1000000) was already =
clear
> (=3D=3D) NV(0): Write-combining range (0xf4000000,0x4000000)
> (=3D=3D) NV(0): Write-combining range (0xa0000,0x10000) was already clear
> (**) Option "BaudRate" "1200"
> (**) Option "StopBits" "2"
> (**) Option "DataBits" "8"
> (**) Option "Parity" "None"
> (**) Option "Vmin" "1"
> (**) Option "Vtime" "0"
> (**) Option "FlowControl" "None"
> (II) Mouse1: SetupAuto: hw.iftype is 4, hw.model is 0
> (II) Mouse1: SetupAuto: protocol is SysMouse
> Could not init font path element /usr/X11R6/lib/X11/fonts/Speedo/, removi=
ng=20
> from list!
>=20
>=20
> _________________________________________________________________
> The new MSN 8: advanced junk mail protection and 2 months FREE* =20
> http://join.msn.com/?page=3Dfeatures/junkmail
>=20
>=20
> To Unsubscribe: send mail to majordomo@FreeBSD.org
> with "unsubscribe freebsd-questions" in the body of the message
--=20
PGP Key : http://www.marcuscom.com/pgp.asc

--=-tIpTFONuD0AEpvwnFttC
Content-Type: application/pgp-signature; name=signature.asc
Content-Description: This is a digitally signed message part

-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.2.1 (FreeBSD)

iD8DBQA+T+u1b2iPiv4Uz4cRAnqVAJ975z2eTNoDWO5yCAwvDnOfA/dEtwCfb5gZ
SETtznsS8Z6agqS3Q4/woDg=
=5GUF
-----END PGP SIGNATURE-----

--=-tIpTFONuD0AEpvwnFttC--


To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-questions" in the body of the message




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?1045425077.39029.2.camel>