Skip site navigation (1)Skip section navigation (2)
Date:      Tue, 18 Oct 2005 12:25:52 +0800
From:      Rommell Barcela <rpb@infocom.ph>
To:        Danny Howard <dannyman@toldme.com>
Cc:        robertors@bs2.com.br, freebsd-stable@freebsd.org, "Giovanni P. Tirloni" <gpt@tirloni.org>
Subject:   Re: No SATA disks appear on E7520 with 5.4-RELEASE
Message-ID:  <43547950.5050507@infocom.ph>
In-Reply-To: <20051018012059.GN18563@ratchet.nebcorp.com>
References:  <20051017231321.GL18563@ratchet.nebcorp.com>	<4354451C.3090107@tirloni.org> <20051018012059.GN18563@ratchet.nebcorp.com>

next in thread | previous in thread | raw e-mail | index | archive | help
Danny Howard wrote:
> Yeah .... just for anyone inclined to puzzle this one ...
> 
> I pored through the system manual on the way home.  Apparently there are
> TWO SATA controllers on the MB.  It would appear that by default, the
> Marvell controller is used, so maybe the thing is that I can get in
> tomorrow, swap the cable from the Marvell connector to the ICH5R
> connectors, and zoom zoom zoom!

I have the same box. Transferring the SATA drives to the ICH5R 
controller did the trick (haven't tried 5.4 yet). The ICH5R has only 2 
channels though. Hopefully the Marvell controller will be supported soon.

For those interested, I have the dmesg below.

Copyright (c) 1992-2005 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
         The Regents of the University of California. All rights reserved.
FreeBSD 6.0-RC1 #0: Wed Oct 12 21:29:52 PHT 2005
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Xeon(TM) CPU 2.80GHz (2800.11-MHz 686-class CPU)
   Origin = "GenuineIntel"  Id = 0xf41  Stepping = 1
 
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
   Features2=0x641d<SSE3,RSVD2,MON,DS_CPL,CNTX-ID,CX16,<b14>>
   AMD Features=0x20100000<NX,LM>
   Hyperthreading: 2 logical CPUs
real memory  = 2146893824 (2047 MB)
avail memory = 2100162560 (2002 MB)
ACPI APIC Table: <PTLTD          APIC  >
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
  cpu0 (BSP): APIC ID:  0
  cpu1 (AP): APIC ID:  1
  cpu2 (AP): APIC ID:  6
  cpu3 (AP): APIC ID:  7
ioapic0 <Version 2.0> irqs 0-23 on motherboard
ioapic1 <Version 2.0> irqs 24-47 on motherboard
ioapic2 <Version 2.0> irqs 48-71 on motherboard
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <PTLTD   RSDT> on motherboard
acpi0: Power Button (fixed)
pci_link0: <ACPI PCI Link LNKA> irq 5 on acpi0
pci_link1: <ACPI PCI Link LNKB> irq 10 on acpi0
pci_link2: <ACPI PCI Link LNKC> irq 7 on acpi0
pci_link3: <ACPI PCI Link LNKD> irq 11 on acpi0
pci_link4: <ACPI PCI Link LNKE> irq 0 on acpi0
pci_link5: <ACPI PCI Link LNKF> irq 0 on acpi0
pci_link6: <ACPI PCI Link LNKG> irq 0 on acpi0
pci_link7: <ACPI PCI Link LNKH> irq 10 on acpi0
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
cpu2: <ACPI CPU> on acpi0
cpu3: <ACPI CPU> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: <unknown> at device 0.1 (no driver attached)
pci0: <base peripheral> at device 1.0 (no driver attached)
pcib1: <ACPI PCI-PCI bridge> irq 16 at device 2.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pcib2: <ACPI PCI-PCI bridge> at device 0.0 on pci1
pci2: <ACPI PCI bus> on pcib2
em0: <Intel(R) PRO/1000 Network Connection, Version - 2.1.7> port 
0x2000-0x203f mem 0xdd200000-0xdd21ffff irq 30 at device 3.0 on pci2
em0: Ethernet address: 00:30:48:75:ed:aa
em0:  Speed:N/A  Duplex:N/A
em1: <Intel(R) PRO/1000 Network Connection, Version - 2.1.7> port 
0x2040-0x207f mem 0xdd220000-0xdd23ffff irq 31 at device 3.1 on pci2
em1: Ethernet address: 00:30:48:75:ed:ab
em1:  Speed:N/A  Duplex:N/A
pci1: <base peripheral, interrupt controller> at device 0.1 (no driver 
attached)
pcib3: <ACPI PCI-PCI bridge> at device 0.2 on pci1
pci3: <ACPI PCI bus> on pcib3
pci3: <mass storage, RAID> at device 4.0 (no driver attached)
pci1: <base peripheral, interrupt controller> at device 0.3 (no driver 
attached)
pcib4: <ACPI PCI-PCI bridge> irq 16 at device 4.0 on pci0
pci4: <ACPI PCI bus> on pcib4
pcib5: <ACPI PCI-PCI bridge> irq 16 at device 6.0 on pci0
pci5: <ACPI PCI bus> on pcib5
pci0: <serial bus, USB> at device 29.0 (no driver attached)
pci0: <serial bus, USB> at device 29.1 (no driver attached)
pci0: <serial bus, USB> at device 29.2 (no driver attached)
pci0: <serial bus, USB> at device 29.3 (no driver attached)
pci0: <serial bus, USB> at device 29.7 (no driver attached)
pcib6: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci6: <ACPI PCI bus> on pcib6
pci6: <display, VGA> at device 1.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH5 UDMA100 controller> port 
0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x14a0-0x14af at device 31.1 on pci0
ata0: <ATA channel 0> on atapci0
ata1: <ATA channel 1> on atapci0
atapci1: <Intel ICH5 SATA150 controller> port 
0x14e8-0x14ef,0x14dc-0x14df,0x14e0-0x14e7,0x14d8-0x14db,0x14b0-0x14bf 
irq 18 at device 31.2 on pci0
atapci1: failed to enable memory mapping!
ata2: <ATA channel 0> on atapci1
ata3: <ATA channel 1> on atapci1
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
acpi_button0: <Power Button> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on 
acpi0
sio0: type 16550A
fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0
fdc0: [FAST]
pmtimer0 on isa0
orm0: <ISA Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xc8fff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
Timecounters tick every 1.000 msec
acd0: CDROM <CD-224E/1.9A> at ata1-master UDMA33
ad4: 35304MB <WDC WD360GD-00FNA0 35.06K35> at ata2-master SATA150
GEOM_MIRROR: Device gm0 created (id=2809579879).
GEOM_MIRROR: Device gm0: provider ad4 detected.
ad6: 35304MB <WDC WD360GD-00FNA0 35.06K35> at ata3-master SATA150
GEOM_MIRROR: Device gm0: provider ad6 detected.
SMP: AP CPU #2 Launched!
SMP: AP CPU #1 Launched!
SMP: AP CPU #3 Launched!
GEOM_MIRROR: Device gm0: provider ad6 activated.
Root mount waiting for: GMIRROR
GEOM_MIRROR: Device gm0: provider ad4 activated.
GEOM_MIRROR: Device gm0: provider mirror/gm0 launched.
Trying to mount root from ufs:/dev/mirror/gm0s1a
em0: link state changed to UP


> :)
> 
> We'll see ...
> 
> -danny



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?43547950.5050507>