Date: Wed, 29 Jun 2016 20:45:51 +0200 From: Sydney Meyer <meyer.sydney@googlemail.com> To: freebsd-wireless@freebsd.org Subject: ath (AR9280) with nanoBSD Message-ID: <C5CC5FDC-F345-4B2E-A382-0BC7BEAC776F@googlemail.com>
next in thread | raw e-mail | index | archive | help
Hello,
i seem to be unable to get the ath driver working on a PC Engines APU 2C2 Board with a Compex WLE200NX (AR9280) MiniPCIe-Card booting from a NanoBSD Image built from HEAD.
I have built the NanoBSD Image without any BUILD, INSTALL or WORLD options and with a GENERIC-NODEBUG Kernel.
I can see the Card in dmesg with
root@:~ # dmesg | grep ath
ath0: <Atheros 9280> mem 0xfe800000-0xfe80ffff at device 0.0 on pci4
[ath] enabling AN_TOP2_FIXUP
ath0: [HT] enabling HT modes
ath0: [HT] 1 stream STBC receive enabled
ath0: [HT] 1 stream STBC transmit enabled
ath0: [HT] 2 RX streams; 2 TX streams
ath0: AR9280 mac 128.2 RF5133 phy 13.0
ath0: 2GHz radio: 0x0000; 5GHz radio: 0x00c0
and pciconf -lv shows
ath0@pci0:4:0:0: class=0x028000 card=0x3099168c chip=0x002a168c rev=0x01 hdr=0x00
vendor = 'Qualcomm Atheros'
device = 'AR928X Wireless Network Adapter (PCI-Express)'
class = network
and
root@:~ # kldstat -v | grep ath
89 pci/ath_pci
but the Card doesn't show up with ifconfig.
When booting from USB with FreeBSD-11.0-ALPHA5-amd64-20160624-r302164-memstick.img the Card is getting recognised regularly with ifconfig as ath0.
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?C5CC5FDC-F345-4B2E-A382-0BC7BEAC776F>