Date: Mon, 17 Dec 2012 17:07:33 -0500 From: Mike Tancsa <mike@sentex.net> To: FreeBSD-STABLE Mailing List <freebsd-stable@freebsd.org> Subject: WRITE_FPDMA_QUEUED CAM status: ATA Status Error Message-ID: <50CF97A5.6090806@sentex.net>
next in thread | raw e-mail | index | archive | help
Hi,
Is there a way to tell / narrow down if an issue with errors like below
are due to a bad cable or bad port multiplier ? The disks in a
particular cage are throwing errors like these below. (RELENG9 from today)
siis0@pci0:5:0:0: class=0x010400 card=0x71241095 chip=0x31241095
rev=0x02 hdr=0x00
vendor = 'Silicon Image, Inc.'
device = 'SiI 3124 PCI-X Serial ATA Controller'
class = mass storage
subclass = RAID
bar [10] = type Memory, range 64, base 0xb4408000, size 128, enabled
bar [18] = type Memory, range 64, base 0xb4400000, size 32768, enabled
bar [20] = type I/O Port, range 32, base 0x3000, size 16, enabled
cap 01[64] = powerspec 2 supports D0 D1 D2 D3 current D0
cap 07[40] = PCI-X 64-bit supports 133MHz, 2048 burst read, 12 split
transactions
cap 05[54] = MSI supports 1 message, 64 bit enabled with 1 message
siisch2: Error while READ LOG EXT
(ada3:siisch2:0:3:0): WRITE_FPDMA_QUEUED. ACB: 61 56 af 71 0a 40 40 00
00 00 00 00
(ada3:siisch2:0:3:0): CAM status: ATA Status Error
(ada3:siisch2:0:3:0): ATA status: 00 ()
(ada3:siisch2:0:3:0): RES: 00 00 00 00 00 00 00 00 00 00 00
(ada3:siisch2:0:3:0): Retrying command
siisch2: Error while READ LOG EXT
(ada2:siisch2:0:2:0): WRITE_FPDMA_QUEUED. ACB: 61 07 dc d8 0b 40 40 00
00 00 00 00
(ada2:siisch2:0:2:0): CAM status: ATA Status Error
(ada2:siisch2:0:2:0): ATA status: 00 ()
(ada2:siisch2:0:2:0): RES: 00 00 00 00 00 00 00 00 00 00 00
(ada2:siisch2:0:2:0): Retrying command
(ada2:siisch2:0:2:0): WRITE_FPDMA_QUEUED. ACB: 61 01 0c 1e 06 40 40 00
00 00 00 00
(ada2:siisch2:0:2:0): CAM status: ATA Status Error
(ada2:siisch2:0:2:0): ATA status: 00 ()
(ada2:siisch2:0:2:0): RES: 00 00 00 00 00 00 00 00 00 00 00
(ada2:siisch2:0:2:0): Retrying command
(ada2:siisch2:0:2:0): WRITE_FPDMA_QUEUED. ACB: 61 06 2d 88 00 40 40 00
00 00 00 00
(ada2:siisch2:0:2:0): CAM status: ATA Status Error
(ada2:siisch2:0:2:0): ATA status: 00 ()
(ada2:siisch2:0:2:0): RES: 00 00 00 00 00 00 00 00 00 00 00
(ada2:siisch2:0:2:0): Retrying command
# smartctl -x /dev/ada2
smartctl 6.0 2012-10-10 r3643 [FreeBSD 9.1-PRERELEASE amd64] (local build)
Copyright (C) 2002-12, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Western Digital Caviar Black
Device Model: WDC WD2002FAEX-007BA0
Serial Number: WD-WMAY02759120
LU WWN Device Id: 5 0014ee 656c4b593
Firmware Version: 05.01D05
User Capacity: 2,000,398,934,016 bytes [2.00 TB]
Sector Size: 512 bytes logical/physical
Device is: In smartctl database [for details use: -P show]
ATA Version is: ATA8-ACS (minor revision not indicated)
SATA Version is: SATA 2.6, 6.0 Gb/s (current: 3.0 Gb/s)
Local Time is: Mon Dec 17 17:04:28 2012 EST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is: Unavailable
APM feature is: Unavailable
Rd look-ahead is: Enabled
Write cache is: Enabled
ATA Security is: Disabled, NOT FROZEN [SEC1]
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x84) Offline data collection activity
was suspended by an interrupting
command from host.
Auto Offline Data Collection:
Enabled.
Self-test execution status: ( 0) The previous self-test routine
completed
without error or no self-test
has ever
been run.
Total time to complete Offline
data collection: (29280) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection
on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 298) minutes.
Conveyance self-test routine
recommended polling time: ( 5) minutes.
SCT capabilities: (0x3037) SCT Status supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
1 Raw_Read_Error_Rate POSR-K 200 200 051 - 1
3 Spin_Up_Time POS--K 253 253 021 - 8833
4 Start_Stop_Count -O--CK 100 100 000 - 15
5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0
7 Seek_Error_Rate -OSR-K 200 200 000 - 0
9 Power_On_Hours -O--CK 093 092 000 - 5288
10 Spin_Retry_Count -O--CK 100 253 000 - 0
11 Calibration_Retry_Count -O--CK 100 253 000 - 0
12 Power_Cycle_Count -O--CK 100 100 000 - 10
192 Power-Off_Retract_Count -O--CK 200 200 000 - 8
193 Load_Cycle_Count -O--CK 200 200 000 - 6
194 Temperature_Celsius -O---K 104 096 000 - 48
196 Reallocated_Event_Count -O--CK 200 200 000 - 0
197 Current_Pending_Sector -O--CK 200 200 000 - 0
198 Offline_Uncorrectable ----CK 100 253 000 - 0
199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 22515
200 Multi_Zone_Error_Rate ---R-- 100 253 000 - 0
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
General Purpose Log Directory Version 1
SMART Log Directory Version 1 [multi-sector log support]
GP/S Log at address 0x00 has 1 sectors [Log Directory]
SMART Log at address 0x01 has 1 sectors [Summary SMART error log]
SMART Log at address 0x02 has 5 sectors [Comprehensive SMART error log]
GP Log at address 0x03 has 6 sectors [Ext. Comprehensive SMART
error log]
SMART Log at address 0x06 has 1 sectors [SMART self-test log]
GP Log at address 0x07 has 1 sectors [Extended self-test log]
SMART Log at address 0x09 has 1 sectors [Selective self-test log]
GP Log at address 0x10 has 1 sectors [NCQ Command Error log]
GP Log at address 0x11 has 1 sectors [SATA Phy Event Counters]
GP/S Log at address 0x80 has 16 sectors [Host vendor specific log]
GP/S Log at address 0x81 has 16 sectors [Host vendor specific log]
GP/S Log at address 0x82 has 16 sectors [Host vendor specific log]
GP/S Log at address 0x83 has 16 sectors [Host vendor specific log]
GP/S Log at address 0x84 has 16 sectors [Host vendor specific log]
GP/S Log at address 0x85 has 16 sectors [Host vendor specific log]
GP/S Log at address 0x86 has 16 sectors [Host vendor specific log]
GP/S Log at address 0x87 has 16 sectors [Host vendor specific log]
GP/S Log at address 0x88 has 16 sectors [Host vendor specific log]
GP/S Log at address 0x89 has 16 sectors [Host vendor specific log]
GP/S Log at address 0x8a has 16 sectors [Host vendor specific log]
GP/S Log at address 0x8b has 16 sectors [Host vendor specific log]
GP/S Log at address 0x8c has 16 sectors [Host vendor specific log]
GP/S Log at address 0x8d has 16 sectors [Host vendor specific log]
GP/S Log at address 0x8e has 16 sectors [Host vendor specific log]
GP/S Log at address 0x8f has 16 sectors [Host vendor specific log]
GP/S Log at address 0x90 has 16 sectors [Host vendor specific log]
GP/S Log at address 0x91 has 16 sectors [Host vendor specific log]
GP/S Log at address 0x92 has 16 sectors [Host vendor specific log]
GP/S Log at address 0x93 has 16 sectors [Host vendor specific log]
GP/S Log at address 0x94 has 16 sectors [Host vendor specific log]
GP/S Log at address 0x95 has 16 sectors [Host vendor specific log]
GP/S Log at address 0x96 has 16 sectors [Host vendor specific log]
GP/S Log at address 0x97 has 16 sectors [Host vendor specific log]
GP/S Log at address 0x98 has 16 sectors [Host vendor specific log]
GP/S Log at address 0x99 has 16 sectors [Host vendor specific log]
GP/S Log at address 0x9a has 16 sectors [Host vendor specific log]
GP/S Log at address 0x9b has 16 sectors [Host vendor specific log]
GP/S Log at address 0x9c has 16 sectors [Host vendor specific log]
GP/S Log at address 0x9d has 16 sectors [Host vendor specific log]
GP/S Log at address 0x9e has 16 sectors [Host vendor specific log]
GP/S Log at address 0x9f has 16 sectors [Host vendor specific log]
GP/S Log at address 0xa0 has 16 sectors [Device vendor specific log]
GP/S Log at address 0xa1 has 16 sectors [Device vendor specific log]
GP/S Log at address 0xa2 has 16 sectors [Device vendor specific log]
GP/S Log at address 0xa3 has 16 sectors [Device vendor specific log]
GP/S Log at address 0xa4 has 16 sectors [Device vendor specific log]
GP/S Log at address 0xa5 has 16 sectors [Device vendor specific log]
GP/S Log at address 0xa6 has 16 sectors [Device vendor specific log]
GP/S Log at address 0xa7 has 16 sectors [Device vendor specific log]
GP/S Log at address 0xa8 has 1 sectors [Device vendor specific log]
GP/S Log at address 0xa9 has 1 sectors [Device vendor specific log]
GP/S Log at address 0xaa has 1 sectors [Device vendor specific log]
GP/S Log at address 0xab has 1 sectors [Device vendor specific log]
GP/S Log at address 0xac has 1 sectors [Device vendor specific log]
GP/S Log at address 0xad has 1 sectors [Device vendor specific log]
GP/S Log at address 0xae has 1 sectors [Device vendor specific log]
GP/S Log at address 0xaf has 1 sectors [Device vendor specific log]
GP/S Log at address 0xb0 has 1 sectors [Device vendor specific log]
GP/S Log at address 0xb1 has 1 sectors [Device vendor specific log]
GP/S Log at address 0xb2 has 1 sectors [Device vendor specific log]
GP/S Log at address 0xb3 has 1 sectors [Device vendor specific log]
GP/S Log at address 0xb4 has 1 sectors [Device vendor specific log]
GP/S Log at address 0xb5 has 1 sectors [Device vendor specific log]
GP Log at address 0xb6 has 1 sectors [Device vendor specific log]
GP/S Log at address 0xb7 has 1 sectors [Device vendor specific log]
GP/S Log at address 0xbd has 1 sectors [Device vendor specific log]
GP/S Log at address 0xc0 has 1 sectors [Device vendor specific log]
GP Log at address 0xc1 has 24 sectors [Device vendor specific log]
GP/S Log at address 0xe0 has 1 sectors [SCT Command/Status]
GP/S Log at address 0xe1 has 1 sectors [SCT Data Transfer]
SMART Extended Comprehensive Error Log Version: 1 (6 sectors)
No Errors Logged
SMART Extended Self-test Log Version: 1 (1 sectors)
No self-tests have been logged. [To run self-tests, use: smartctl -t]
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
SCT Status Version: 3
SCT Version (vendor specific): 258 (0x0102)
SCT Support Level: 1
Device State: Active (0)
Current Temperature: 48 Celsius
Power Cycle Min/Max Temperature: 42/48 Celsius
Lifetime Min/Max Temperature: 42/56 Celsius
Under/Over Temperature Limit Count: 0/0
SCT Temperature History Version: 2
Temperature Sampling Period: 1 minute
Temperature Logging Interval: 1 minute
Min/Max recommended Temperature: 0/60 Celsius
Min/Max Temperature Limit: -41/85 Celsius
Temperature History Size (Index): 478 (67)
Index Estimated Time Temperature Celsius
68 2012-12-17 09:07 48 *****************************
... ..(170 skipped). .. *****************************
239 2012-12-17 11:58 48 *****************************
240 2012-12-17 11:59 ? -
241 2012-12-17 12:00 42 ***********************
242 2012-12-17 12:01 42 ***********************
243 2012-12-17 12:02 43 ************************
244 2012-12-17 12:03 44 *************************
... ..( 6 skipped). .. *************************
251 2012-12-17 12:10 44 *************************
252 2012-12-17 12:11 45 **************************
... ..( 9 skipped). .. **************************
262 2012-12-17 12:21 45 **************************
263 2012-12-17 12:22 46 ***************************
... ..( 15 skipped). .. ***************************
279 2012-12-17 12:38 46 ***************************
280 2012-12-17 12:39 47 ****************************
... ..( 30 skipped). .. ****************************
311 2012-12-17 13:10 47 ****************************
312 2012-12-17 13:11 48 *****************************
... ..( 54 skipped). .. *****************************
367 2012-12-17 14:06 48 *****************************
368 2012-12-17 14:07 47 ****************************
... ..( 27 skipped). .. ****************************
396 2012-12-17 14:35 47 ****************************
397 2012-12-17 14:36 48 *****************************
... ..(147 skipped). .. *****************************
67 2012-12-17 17:04 48 *****************************
SCT Error Recovery Control command not supported
Device Statistics (GP Log 0x04) not supported
SATA Phy Event Counters (GP Log 0x11)
ID Size Value Description
0x0001 2 1 Command failed due to ICRC error
0x0002 2 1 R_ERR response for data FIS
0x0003 2 0 R_ERR response for device-to-host data FIS
0x0004 2 1 R_ERR response for host-to-device data FIS
0x0005 2 0 R_ERR response for non-data FIS
0x0006 2 0 R_ERR response for device-to-host non-data FIS
0x0007 2 0 R_ERR response for host-to-device non-data FIS
0x000a 2 0 Device-to-host register FISes sent due to a COMRESET
0x000b 2 1 CRC errors within host-to-device FIS
0x8000 4 7720 Vendor specific
--
-------------------
Mike Tancsa, tel +1 519 651 3400
Sentex Communications, mike@sentex.net
Providing Internet services since 1994 www.sentex.net
Cambridge, Ontario Canada http://www.tancsa.com/
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?50CF97A5.6090806>