Skip site navigation (1)Skip section navigation (2)
Date:      Wed, 28 Apr 2010 18:02:05 +0300
From:      Alexander Motin <mav@FreeBSD.org>
To:        Andy Farkas <chuzzwassa@gmail.com>
Cc:        freebsd-scsi@freebsd.org, Scott Long <scottl@FreeBSD.org>, freebsd-stable@freebsd.org
Subject:   Re: MFC of "Large set of CAM improvements" breaks I/O to Adaptec 29160 SCSI controller
Message-ID:  <4BD84DED.2060209@FreeBSD.org>
In-Reply-To: <i2hff80e6381004270143q4ebd10c6pb6dafd6128e47607@mail.gmail.com>
References:  <i2hff80e6381004270143q4ebd10c6pb6dafd6128e47607@mail.gmail.com>

next in thread | previous in thread | raw e-mail | index | archive | help
Andy Farkas wrote:
> RELENG_8 csup'd with date=2010.02.14.00.00 works perfectly for days.
> 
> RELENG_8 csup'd with date=2010.02.15.00.00 dead-locks the disk I/O
> subsystem. Network still operational but anything needing disk hangs.
> Power-cycle required.
> 
> kernel config is GENERIC with KDB, DDB and BREAK_TO_DEBUGGER options added.
> 
> hardware:
> ahc0: <Adaptec 29160 Ultra160 SCSI adapter> port 0x4000-0x40ff mem
> 0xefa00000-0xefa00fff irq 16 at device 0.0 on pci10
> ahc0: [ITHREAD]
> aic7892: Ultra160 Wide Channel A, SCSI Id=7, 32/253 SCBs
> 
> da0: <SEAGATE ST3146707LW 0005> Fixed Direct Access SCSI-3 device
> da1: <SEAGATE ST3146707LW 0005> Fixed Direct Access SCSI-3 device
> 
> 
> The dead-lock can happen at any time, but I can provoke it by running
> a bonnie++ disk test. It happens doing rm -rf /usr/obj/usr and it has
> happened doing a make installworld. It can survive a make buildworld
> (the system runs normally until it decides to dead-lock).
> 
> The box (HP ProLiant ML 110) has 2 scsi disks and 4 sata disks. The
> 2010.02.15 kernel will run perfectly for days on the SATA disks. *Only*
> when the scsi disks are accessed will the system dead-lock. Note that
> the SATA disks do not work either if the system has dead-locked.
> 
> I can provide more details and a vmcore.0 if anyone is interested.

I have some 29160N locally and I'll try to reproduce this.

-- 
Alexander Motin



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?4BD84DED.2060209>