Date: Mon, 17 Sep 2001 23:55:28 +0200 From: "Chojin" <freebsd@tarakan-network.com> To: "Chojin" <freebsd@tarakan-network.com>, "Joe Clarke" <marcus@marcuscom.com> Cc: "Jean-Francois Dive" <jef@linuxbe.org>, <freebsd-questions@FreeBSD.ORG>, <freebsd-hackers@FreeBSD.ORG> Subject: Re: Problem with snmpd Message-ID: <00c501c13fc3$9e9aeb10$0245a8c0@chojin> References: <20010912143244.B43876-100000@shumai.marcuscom.com> <017801c13bc1$5bc3a580$0245a8c0@chojin>
index | next in thread | previous in thread | raw e-mail
[-- Attachment #1 --] I didn't resolved my problem. Even after upgraded to 4.4-stable (because there was maybe a bug in snmpd :-p). I don't know what I could do. ----- Original Message ----- From: "Chojin" <freebsd@tarakan-network.com> To: "Joe Clarke" <marcus@marcuscom.com> Cc: "Jean-Francois Dive" <jef@linuxbe.org>; <freebsd-questions@FreeBSD.ORG>; <freebsd-hackers@FreeBSD.ORG> Sent: Wednesday, September 12, 2001 9:30 PM Subject: Re: Problem with snmpd > I tried your snmpd.conf but with no success :'( > ----- Original Message ----- > From: "Joe Clarke" <marcus@marcuscom.com> > To: "Chojin" <freebsd@tarakan-network.com> > Cc: "Jean-Francois Dive" <jef@linuxbe.org>; <freebsd-questions@FreeBSD.ORG>; > <freebsd-hackers@FreeBSD.ORG> > Sent: Wednesday, September 12, 2001 8:34 PM > Subject: Re: Problem with snmpd > > > > Can you send your snmp.conf file? These are the relevant bits of mine: > > > > com2sec local localhost public > > com2sec localrw localhost private > > com2sec mynetwork 172.18.0.0/24 public > > com2sec mynetworkrw 172.18.0.0/24 private > > > > #### > > # Second, map the security names into group names: > > > > # sec.model sec.name > > group LocalRWGroup v1 localrw > > group LocalRWGroup v2c localrw > > group LocalRWGroup usm localrw > > group LocalROGroup v1 local > > group LocalROGroup v2c local > > group LocalROGroup usm local > > group NetROGroup v1 mynetwork > > group NetROGroup v2c mynetwork > > group NetROGroup usm mynetwork > > group NetRWGroup v1 mynetworkrw > > group NetRWGroup v2c mynetworkrw > > group NetRWGroup usm mynetworkrw > > > > #### > > # Third, create a view for us to let the groups have rights to: > > > > # incl/excl subtree mask > > view all included .1 80 > > > > #### > > # Finally, grant the 2 groups access to the 1 view with different > > # write permissions: > > > > # context sec.model sec.level match read write notif > > access LocalROGroup "" any noauth exact all none none > > access LocalRWGroup "" any noauth exact all all none > > access NetROGroup "" any noauth exact all none none > > access NetRWGroup "" any noauth exact all all none > > > > > > public@localhost does work on my machine. > > > > Joe > > > > On Wed, 12 Sep 2001, Chojin wrote: > > > > > I used TMRTGCHO as community name before, but since I've got this > problem I > > > use now public. > > > Request from localhost or any other interface doesn't work. > > > I cleaned snmpd.log, restarted snmpd: > > > #/usr/local/sbin/snmpd -D -c /usr/local/share/snmp/snmpd.conf -l > > > /var/log/snmpd.log > > > > > > and a new one is located at http://www.tarakan-network.com/snmpd.log (I > did > > > a snmpwalk and snmpget for public@localhost but no success) > > > > > > ----- Original Message ----- > > > From: "Jean-Francois Dive" <jef@linuxbe.org> > > > To: "Chojin" <freebsd@tarakan-network.com> > > > Sent: Wednesday, September 12, 2001 10:38 AM > > > Subject: Re: Problem with snmpd > > > > > > > > > > Hi (salut) > > > > > > > > In fact, i see some successfull request with the community: > > > > TMRTGCHO and no attemps with the localhost one... seems pretty odd. > did > > > > you only got those requests from localhost not working ? > > > > > > > > Otherwise, purge the log file, be *sure* that no requests are comming > from > > > > somewhere else and resart to see some failures... > > > > > > > > JeF > > > > > > > > On Wed, 12 Sep 2001, Chojin wrote: > > > > > > > > > I launched in debug mode > > > > > #/usr/local/sbin/snmpd -D -c /usr/local/share/snmp/snmpd.conf -l > > > > > /var/log/snmpd.log > > > > > I attached snmpd.log > > > > > There are so many informations I can't detect the problem :pp > > > > > > > > > > ----- Original Message ----- > > > > > From: "Jean-Francois Dive" <jef@linuxbe.org> > > > > > To: "Chojin" <freebsd@tarakan-network.com> > > > > > Cc: <freebsd-questions@FreeBSD.ORG>; <freebsd-hackers@FreeBSD.ORG> > > > > > Sent: Wednesday, September 12, 2001 9:53 AM > > > > > Subject: Re: Problem with snmpd > > > > > > > > > > > > > > > > i think it is possible to start the snmpd and not send it to > > > backgroud, > > > > > > and see if it does printout some error messages..Otherwise use the > > > truss > > > > > > command to follow the syscalls made by the daemon while processing > > > your > > > > > > request, this could point you to a problem.. > > > > > > > > > > > > JeF > > > > > > > > > > > > On Wed, 12 Sep 2001, Chojin wrote: > > > > > > > > > > > > > snmpd.log is empty... > > > > > > > > > > > > > > I did #netstat -an | grep 161 > > > > > > > udp4 0 0 *.161 *.* > > > > > > > > > > > > > > port 161 exists then it should work... > > > > > > > > > > > > > > ----- Original Message ----- > > > > > > > From: "Jean-Francois Dive" <jef@linuxbe.org> > > > > > > > To: "Chojin" <freebsd@tarakan-network.com> > > > > > > > Cc: <freebsd-questions@FreeBSD.ORG>; > <freebsd-hackers@FreeBSD.ORG> > > > > > > > Sent: Wednesday, September 12, 2001 3:21 AM > > > > > > > Subject: Re: Problem with snmpd > > > > > > > > > > > > > > > > > > > > > > Hi, > > > > > > > > > > > > > > > > So you have any traces in a log file or something similar ? > > > > > > > > > > > > > > > > JeF > > > > > > > > > > > > > > > > On Tue, 11 Sep 2001, Chojin wrote: > > > > > > > > > > > > > > > > > Hello, > > > > > > > > > > > > > > > > > > I have a problem with snmpd. > > > > > > > > > > > > > > > > > > In fact, one day, for unknown reason ( I didn't modify any > > > > > setting ), > > > > > > > snmpd > > > > > > > > > didn't work anymore: > > > > > > > > > When I do a snmpwalk or snmpget to public@localhost it > doesn't > > > > > respond. > > > > > > > > > I checked snmpd, recreated snmpd.conf and launched again > snmpd > > > > > with -c > > > > > > > > > and -l to be sure it uses the correct files. > > > > > > > > > But even if snmpd is in background process, > public@localhost > > > > > doesn't > > > > > > > work. > > > > > > > > > I don't have any firewall rule that block it. > > > > > > > > > > > > > > > > > > #snmpwalk localhost public > > > > > > > > > Timeout: No Response from localhost > > > > > > > > > #snmpget localhost public SysName > > > > > > > > > Timeout: No Response from localhost. > > > > > > > > > > > > > > > > > > After I upgraded my system from 4.3-STABLE to 4.4-RC, it > didn't > > > > > change > > > > > > > > > anything for snmpd. > > > > > > > > > > > > > > > > > > If someone has got any idea... > > > > > > > > > > > > > > > > > > Best regards, > > > > > > > > > > > > > > > > > > Chojin > > > > > > > > > > > > > > > > > > > > > > > > > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > > > > > > > > > with "unsubscribe freebsd-hackers" in the body of the > message > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > > > with "unsubscribe freebsd-questions" in the body of the message > > > > > > > > > > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > > with "unsubscribe freebsd-questions" in the body of the message > > > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of the message > [-- Attachment #2 --] com2sec local localhost public com2sec localrw localhost private com2sec mynetwork 192.168.0.0/24 public com2sec mynetworkrw 192.168.0.0/24 private #### # Second, map the security names into group names: # sec.model sec.name group LocalRWGroup v1 localrw group LocalRWGroup v2c localrw group LocalRWGroup usm localrw group LocalROGroup v1 local group LocalROGroup v2c local group LocalROGroup usm local group NetROGroup v1 mynetwork group NetROGroup v2c mynetwork group NetROGroup usm mynetwork group NetRWGroup v1 mynetworkrw group NetRWGroup v2c mynetworkrw group NetRWGroup usm mynetworkrw #### # Third, create a view for us to let the groups have rights to: # incl/excl subtree mask view all included .1 80 #### # Finally, grant the 2 groups access to the 1 view with different # write permissions: # context sec.model sec.level match read write notif access LocalROGroup "" any noauth exact all none none access LocalRWGroup "" any noauth exact all all none access NetROGroup "" any noauth exact all none none access NetRWGroup "" any noauth exact all all none rocommunity public localhosthelp
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?00c501c13fc3$9e9aeb10$0245a8c0>