Date: Mon, 01 Feb 1999 09:17:28 +1100 From: Andrew Johns <A_Johns@TurnAround.com.au> To: Fredrik Johansson <frejo@ituf.liu.se> Cc: freebsd-questions@FreeBSD.ORG Subject: Re: kernel will not compile Message-ID: <36B4D678.82462D81@TurnAround.com.au> References: <36AD7C15.A19E29EE@ituf.liu.se>
next in thread | previous in thread | raw e-mail | index | archive | help
Try enabling the controller scbus0 device - all the scsi devices _require_ it. (ie:*must* have it) Fredrik Johansson wrote: > Sorry, but I forgot the config file for the previous letter. > > it follows here > > -Fredrik > > ------------------------------------------------------------------------ > # > # GENERIC -- Generic machine with WD/AHx/NCR/BTx family disks > # > # For more information read the handbook part System Administration -> > # Configuring the FreeBSD Kernel -> The Configuration File. > # The handbook is available in /usr/share/doc/handbook or online as > # latest version from the FreeBSD World Wide Web server > # <URL:http://www.FreeBSD.ORG/>; > # > # An exhaustive list of options and more detailed explanations of the > # device lines is present in the ./LINT configuration file. If you are > # in doubt as to the purpose or necessity of a line, check first in LINT. > # > # $Id: GENERIC,v 1.125 1998/10/16 01:30:11 obrien Exp $ > > machine "i386" > #cpu "I386_CPU" > #cpu "I486_CPU" > cpu "I586_CPU" > #cpu "I686_CPU" > ident FLINTA > maxusers 4 > > options MATH_EMULATE #Support for x87 emulation > options INET #InterNETworking > options FFS #Berkeley Fast Filesystem > options FFS_ROOT #FFS usable as root device [keep this!] > options MFS #Memory Filesystem > options MFS_ROOT #MFS usable as root device, "MFS" req'ed > options NFS #Network Filesystem > options NFS_ROOT #NFS usable as root device, "NFS" req'ed > options MSDOSFS #MSDOS Filesystem > options "CD9660" #ISO 9660 Filesystem > options "CD9660_ROOT" #CD-ROM usable as root. "CD9660" req'ed > options PROCFS #Process filesystem > options "COMPAT_43" #Compatible with BSD 4.3 [KEEP THIS!] > options SCSI_DELAY=15000 #Be pessimistic about Joe SCSI device > options UCONSOLE #Allow users to grab the console > options FAILSAFE #Be conservative > options USERCONFIG #boot -c editor > options VISUAL_USERCONFIG #visual boot -c editor > options "EXT2FS" #linux file system > > config kernel root on wd0 > > controller isa0 > controller eisa0 > controller pci0 > > controller fdc0 at isa? port "IO_FD1" bio irq 6 drq 2 vector fdintr > disk fd0 at fdc0 drive 0 > disk fd1 at fdc0 drive 1 > # Unless you know very well what you're doing, leave ft0 at drive 2, or > # remove the line entirely if you don't need it. Trying to configure > # it on another unit might cause surprises, see PR kern/7176. > tape ft0 at fdc0 drive 2 > > options "CMD640" # work around CMD640 chip deficiency > controller wdc0 at isa? port "IO_WD1" bio irq 14 vector wdintr > disk wd0 at wdc0 drive 0 > disk wd1 at wdc0 drive 1 > > controller wdc1 at isa? port "IO_WD2" bio irq 15 vector wdintr > disk wd2 at wdc1 drive 0 > disk wd3 at wdc1 drive 1 > > options ATAPI #Enable ATAPI support for IDE bus > options ATAPI_STATIC #Don't do it as an LKM > device wcd0 #IDE CD-ROM > device wfd0 #IDE Floppy (e.g. LS-120) > > # A single entry for any of these controllers (ncr, ahb, ahc, amd) is > # sufficient for any number of installed devices. > #controller ncr0 > #controller amd0 > controller ahb0 > #controller ahc0 > controller isp0 > > # This controller offers a number of configuration options, too many to > # document here - see the LINT file in this directory and look up the > # dpt0 entry there for much fuller documentation on this. > #controller dpt0 > > #controller adv0 at isa? port ? cam irq ? > #controller adw0 > #controller bt0 at isa? port ? cam irq ? > #controller aha0 at isa? port ? cam irq ? > #controller uha0 at isa? port "IO_UHA0" bio irq ? drq 5 vector uhaintr > #controller aic0 at isa? port 0x340 bio irq 11 vector aicintr > #controller nca0 at isa? port 0x1f88 bio irq 10 vector ncaintr > #controller nca1 at isa? port 0x350 bio irq 5 vector ncaintr > #controller sea0 at isa? bio irq 5 iomem 0xc8000 iosiz 0x2000 vector seaintr > > #controller scbus0 > > device da0 > > device sa0 > > device pass0 > > device cd0 #Only need one of these, the code dynamically grows > > #device wt0 at isa? port 0x300 bio irq 5 drq 1 vector wtintr > #device mcd0 at isa? port 0x300 bio irq 10 vector mcdintr > > #controller matcd0 at isa? port 0x230 bio > > #device scd0 at isa? port 0x230 bio > > # syscons is the default console driver, resembling an SCO console > device sc0 at isa? port "IO_KBD" conflicts tty irq 1 vector scintr > # Enable this and PCVT_FREEBSD for pcvt vt220 compatible console driver > #device vt0 at isa? port "IO_KBD" conflicts tty irq 1 vector pcrint > #options XSERVER # support for X server > #options FAT_CURSOR # start with block cursor > # If you have a ThinkPAD, uncomment this along with the rest of the PCVT lines > #options PCVT_SCANSET=2 # IBM keyboards are non-std > > device npx0 at isa? port "IO_NPX" irq 13 vector npxintr > > # > # Laptop support (see LINT for more options) > # > device apm0 at isa? disable flags 0x31 # Advanced Power Management > > # PCCARD (PCMCIA) support > #controller card0 > #device pcic0 at card? > #device pcic1 at card? > > device sio0 at isa? port "IO_COM1" flags 0x10 tty irq 4 vector siointr > device sio1 at isa? port "IO_COM2" tty irq 3 vector siointr > #device sio2 at isa? disable port "IO_COM3" tty irq 5 vector siointr > #device sio3 at isa? disable port "IO_COM4" tty irq 9 vector siointr > > device lpt0 at isa? port? tty irq 7 vector lptintr > > device psm0 at isa? port "IO_KBD" conflicts tty irq 12 vector psmintr > > # Order is important here due to intrusive probes, do *not* alphabetize > # this list of network interfaces until the probes have been fixed. > # Right now it appears that the ie0 must be probed before ep0. See > # revision 1.20 of this file. > #device de0 > device fxp0 > #device tl0 > #device tx0 > #device vx0 > #device xl0 > > #device ed0 at isa? port 0x280 net irq 10 iomem 0xd8000 vector edintr > #device ie0 at isa? port 0x300 net irq 10 iomem 0xd0000 vector ieintr > #device ep0 at isa? port 0x300 net irq 10 vector epintr > #device ex0 at isa? port? net irq? vector exintr > #device fe0 at isa? port 0x300 net irq ? vector feintr > #device le0 at isa? port 0x300 net irq 5 iomem 0xd0000 vector le_intr > #device lnc0 at isa? port 0x280 net irq 10 drq 0 vector lncintr > #device ze0 at isa? port 0x300 net irq 10 iomem 0xd8000 vector zeintr > #device zp0 at isa? port 0x300 net irq 10 iomem 0xd8000 vector zpintr > #device cs0 at isa? port 0x300 net irq ? vector csintr > > pseudo-device loop > pseudo-device ether > #pseudo-device sl 1 > #pseudo-device ppp 1 > #pseudo-device tun 1 > pseudo-device pty 16 > pseudo-device gzip # Exec gzipped a.out's > > # KTRACE enables the system-call tracing facility ktrace(2). > # This adds 4 KB bloat to your kernel, and slightly increases > # the costs of each syscall. > options KTRACE #kernel tracing > > # This provides support for System V shared memory. > # > options SYSVSHM > > # The `bpfilter' pseudo-device enables the Berkeley Packet Filter. Be > # aware of the legal and administrative consequences of enabling this > # option. The number of devices determines the maximum number of > # simultaneous BPF clients programs runnable. > #pseudo-device bpfilter 4 #Berkeley packet filter > controller snd0 > device sb0 at isa? port 0x220 irq 5 conflicts drq 1 vector sbintr > device sbxvi0 at isa? drq 5 > device sbmidi0 at isa? port 0x330 -- Regards Andrew Johns TurnAround Solutions Pty Ltd http://www.turnaround.com.au/ To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?36B4D678.82462D81>