Date: Sun, 13 Jan 2002 09:46:54 -0700 (MST) From: "george vagner" <george@vagner.com> To: questions@freebsd.org Subject: dmesg Message-ID: <200201131646.g0DGksh04275@ns1.vagner.com>
next in thread | raw e-mail | index | archive | help
been using freebsd since 2.2 days, i am running a thinpad 760xd and get some
messages from the dmesg output that some things are not liked.
I am particularly wondering about the pcibios error message and what it means
and if there is a way to fix it.
another issue is i cant reboot fully, the system syncs disks and just hangs there. I added Broken_keyboard_reset to the kernel but that didnt change
anything, the GENERIC kernel WILL reboot but not the custom kernel
that just has some options added like sound and firewall support.
It is a direct copy from GENERIC to mykernel and aded maxusers and nmbclusters, sound and firewall, nothing was deleted from the generic only added.
here is my dmesg
$ dmesg
Copyright (c) 1992-2002 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.5-RC #2: Sat Jan 12 21:34:59 MST 2002
root@meetoo.com:/usr/obj/usr/src/sys/mykernel
Timecounter "i8254" frequency 1193182 Hz
Timecounter "TSC" frequency 165790207 Hz
CPU: Pentium/P55C (165.79-MHz 586-class CPU)
Origin = "GenuineIntel" Id = 0x544 Stepping = 4
Features=0x8001bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,MMX>
real memory = 67108864 (65536K bytes)
avail memory = 60784640 (59360K bytes)
Preloaded elf kernel "kernel" at 0xc0343000.
Intel Pentium detected, installing workaround for F00F bug
pcibios: No call entry point
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
isab0: <Intel 82371FB PCI to ISA bridge> at device 1.0 on pci0
isa0: <ISA bus> on isab0
pcibios: No call entry point
pci_cfgintr: BIOS 0.00 doesn't support interrupt routing
pcic0: <TI PCI-1130 PCI-CardBus Bridge> mem 0x10812000-0x10812fff at device 2.0 on pci0
pcibios: No call entry point
pci_cfgintr: BIOS 0.00 doesn't support interrupt routing
pcic0: No PCI interrupt routed, trying ISA.
pcic0: Polling mode
pcic0: TI113X PCI Config Reg: [ring enable][speaker enable][CSC parallel isa irq]
pccard0: <PC Card bus (classic)> on pcic0
pcibios: No call entry point
pci_cfgintr: BIOS 0.00 doesn't support interrupt routing
pcic1: <TI PCI-1130 PCI-CardBus Bridge> mem 0x10811000-0x10811fff at device 2.1 on pci0
pcibios: No call entry point
pci_cfgintr: BIOS 0.00 doesn't support interrupt routing
pcic1: No PCI interrupt routed, trying ISA.
pcic1: Polling mode
pcic1: TI113X PCI Config Reg: [ring enable][speaker enable][CSC parallel isa irq]
pccard1: <PC Card bus (classic)> on pcic1
pci0: <Trident model 9660 VGA-compatible display device> at 3.0 irq 11
pci0: <unknown card> (vendor=0x1014, dev=0x0057) at 5.0 irq 11
orm0: <Option ROM> at iomem 0xc0000-0xc7fff on isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
ata0 at port 0x1f0-0x1f7,0x3f6 irq 14 on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0: configured irq 4 not in bitmap of probed irqs 0x400
sio0 at port 0x3f8-0x3ff irq 4 on isa0
sio0: type 16550A
sio1: configured irq 3 not in bitmap of probed irqs 0
unknown: <PNP0000> can't assign resources
unknown: <PNP0303> can't assign resources
unknown: <PNP0f13> can't assign resources
unknown: <PNP0700> can't assign resources
unknown: <PNP0680> can't assign resources
sio2: <16550A-compatible COM port> at port 0x2e8-0x2ef irq 3 on isa0
sio2: type 16550A
unknown: <IBM0070> can't assign resources
IP packet filtering initialized, divert disabled, rule-based forwarding disabled, default to deny, unlimited logging
ad0: 28615MB <IBM-DJSA-230> [58140/16/63] at ata0-master BIOSPIO
acd0: CDROM <SANYO CRD-S58P> at ata0-slave using BIOSPIO
Mounting root from ufs:/dev/ad0s1a
pccard: card inserted, slot 1
ed1 at port 0x300-0x31f irq 5 flags 0x80000 slot 1 on pccard1
ed1: address 00:e0:98:83:cf:aa, type Linksys (16 bit)
ukphy0: <Generic IEEE 802.3u media interface> on miibus0
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
arp_rtrequest: bad gateway value
$
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200201131646.g0DGksh04275>