Date: Fri, 13 Mar 2009 16:02:39 +0100 From: Nicolas <nikobordx@free.fr> To: freebsd-current@freebsd.org Subject: Intel PRO/Wireless 5100AGN support Message-ID: <49BA758F.4070203@free.fr>
next in thread | raw e-mail | index | archive | help
Hi,
I'm trying to use my wireless card Intel(R) PRO/Wireless 5100AGN.
I added to the file "/usr/src/sys/dev/iwn/if_iwn.c" the code "{ 0x8086,
0x4237, "Intel(R) PRO/Wireless 5100AGN" },"
After, i found on the net the file "iwlwifi-5000-ucode-5.4.A.11.tar.gz"
which contains the firmware code "iwlwifi-5000-1.ucode".
I have converted with the command: "b64encode iwlwifi-5000-1.ucode
iwlwifi-5000-1.fw.uu > iwlwifi-5000-1.fw.uu"
Then I changed the file "/usr/src/sys/modules/iwnfw/Makefile" to match
the new file "iwlwifi-5000-1.fw.uu
After all modules load (driver + firmware), she was recognized as:
iwn0: <Intel(R) PRO/Wireless 5100AGN> mem 0xde000000-0xde001fff irq 16
at device 0.0 on pci2
iwn0: Reg Domain: , address 00:21:6b:2b:78:04
iwn0: iwn_read_eeprom_ht40: no entry for channel 124
iwn0: iwn_read_eeprom_ht40: no entry for channel 132
iwn0: iwn_read_eeprom_ht40: no entry for channel 149
iwn0: iwn_read_eeprom_ht40: no entry for channel 157
iwn0: [ITHREAD]
iwn0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
iwn0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps
24Mbps 36Mbps 48Mbps 54Mbps
iwn0: 11ng MCS: 15Mbps 30Mbps 45Mbps 60Mbps 90Mbps 120Mbps 135Mbps
150Mbps 30Mbps 60Mbps 90Mbps 120Mbps 180Mbps 240Mbps 270Mbps 300Mbps
But when i try to connect to the web, i have this message:
iwn0: iwn_transfer_firmware: invalid firmware header, main
[128504,49152], init [118176,49152] boot 0
iwn0: iwn_init_locked: could not load firmware, error 22
Is this a problem of conversion ?
The conversion input command is bad ?
Thanks in advance for your response.
Niko.
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?49BA758F.4070203>