Date: Sat, 12 Oct 2002 13:40:08 +0200 From: Martin Nilsson <martin@gneto.com> To: current@freebsd.org Subject: PCI bus lost on Supermicro P3TDE6. ACPI? Message-ID: <3DA80A18.5020900@gneto.com>
index | next in thread | raw e-mail
For a while I have problems running Current on my Supermicro P3TDE6 motherboard. The em0 device is never probed on newer kernels as it seems that the 64bit/66MHz bus is not recognized anymore. This may be caused by the latest ACPI import but I'm no expert in these matters. I have the following files available for anyone that knows what is going on: http://www.gneto.com/current-20021012/dmesg.ok http://www.gneto.com/current-20021012/dmesg.err http://www.gneto.com/current-20021012/dmesg.diff http://www.gneto.com/current-20021012/P3TDE6.asl http://www.gneto.com/current-20021012/P3TDE6.dsdt Following is a diff between dmesg form my latest working kernel and one made today. It seems that todays acpi.ko works as it should with the kernel from Sep 21 but not with todays kernel, strange! --- dmesg.ok Sat Oct 12 13:10:34 2002 +++ dmesg.err Sat Oct 12 13:10:34 2002 @@ -1,16 +1,16 @@ Copyright (c) 1992-2002 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. -FreeBSD 5.0-CURRENT #0: Sat Sep 21 10:52:11 CEST 2002 +FreeBSD 5.0-CURRENT #0: Sat Oct 12 12:51:52 CEST 2002 root@euklides.gneto.com:/usr/obj/ext/FreeBSD/CURRENT/sys/EUKLIDES -Preloaded elf kernel "/boot/kernel.ok/kernel" at 0xc04db000. -Preloaded elf module "/boot/kernel/acpi.ko" at 0xc04db0ac. +Preloaded elf kernel "/boot/kernel/kernel" at 0xc04e4000. +Preloaded elf module "/boot/kernel/acpi.ko" at 0xc04e40a8. Timecounter "i8254" frequency 1193182 Hz CPU: Pentium III/Pentium III Xeon/Celeron (1266.07-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x6b1 Stepping = 1 Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE> real memory = 1610547200 (1572800K bytes) -avail memory = 1559089152 (1522548K bytes) +avail memory = 1559019520 (1522480K bytes) Programming 16 pins in IOAPIC #0 IOAPIC #0 intpin 2 -> irq 0 Programming 16 pins in IOAPIC #1 @@ -20,7 +20,6 @@ io0 (APIC): apic id: 4, version: 0x000f0011, at 0xfec00000 io1 (APIC): apic id: 5, version: 0x000f0011, at 0xfec01000 Pentium Pro MTRR support enabled -Using $PIR table, 10 entries at 0xc00f52e0 ACPI-0623: *** Warning: Type override - [DEB_] had invalid type (Integer) for Scope operator, changed to (Scope) ACPI-0623: *** Warning: Type override - [MLIB] had invalid type (Integer) for Scope operator, changed to (Scope) ACPI-0623: *** Warning: Type override - [IO__] had invalid type (Integer) for Scope operator, changed to (Scope) @@ -39,19 +38,20 @@ acpi0: <RCC RCCNILE > on motherboard acpi0: power button is handled as a fixed feature programming model. Timecounter "ACPI-safe" frequency 3579545 Hz +Using $PIR table, 10 entries at 0xc00f52e0 acpi_timer0: <32-bit timer at 3.579545MHz> port 0x508-0x50b on acpi0 acpi_cpu0: <CPU> on acpi0 acpi_cpu1: <CPU> on acpi0 acpi_cpu2: <CPU> on acpi0 acpi_cpu3: <CPU> on acpi0 acpi_button0: <Sleep Button> on acpi0 -pcib1: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 +pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 ---- initial configuration ------------------------ ---- before setting priority for links ------------ ---- before fixup boot-disabled links ------------- ---- after fixup boot-disabled links -------------- ---- arbitrated configuration --------------------- -pci0: <ACPI PCI bus> on pcib1 +pci0: <ACPI PCI bus> on pcib0 IOAPIC #1 intpin 0 -> irq 2 IOAPIC #1 intpin 2 -> irq 5 IOAPIC #1 intpin 4 -> irq 9 @@ -59,13 +59,13 @@ IOAPIC #1 intpin 11 -> irq 11 IOAPIC #1 intpin 15 -> irq 16 IOAPIC #0 intpin 10 -> irq 17 -pcib3: <ACPI PCI-PCI bridge> at device 0.1 on pci0 +pcib1: <ACPI PCI-PCI bridge> at device 0.1 on pci0 ---- initial configuration ------------------------ ---- before setting priority for links ------------ ---- before fixup boot-disabled links ------------- ---- after fixup boot-disabled links -------------- ---- arbitrated configuration --------------------- -pci1: <ACPI PCI bus> on pcib3 +pci1: <ACPI PCI bus> on pcib1 IOAPIC #1 intpin 14 -> irq 18 pci1: <display, VGA> at device 0.0 (no driver attached) nge0: <National Semiconductor Gigabit Ethernet> port 0xde00-0xdeff mem 0xfeaff000-0xfeafffff irq 2 at device 1.0 on pci0 @@ -75,9 +75,9 @@ nsgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto pci0: <network, ethernet> at device 2.0 (no driver attached) pcm0: <AudioPCI ES1370> port 0xdf00-0xdf3f irq 9 at device 3.0 on pci0 -ahc_pci0: <Adaptec aic7899 Ultra160 SCSI adapter> port 0xd000-0xd0ff mem 0xfeadc000-0xfeadcfff irq 10 at device 5.0 on pci0 +ahc0: <Adaptec aic7899 Ultra160 SCSI adapter> port 0xd000-0xd0ff mem 0xfeadc000-0xfeadcfff irq 10 at device 5.0 on pci0 aic7899: Ultra160 Wide Channel A, SCSI Id=7, 32/253 SCBs -ahc_pci1: <Adaptec aic7899 Ultra160 SCSI adapter> port 0xd800-0xd8ff mem 0xfeadf000-0xfeadffff irq 11 at device 5.1 on pci0 +ahc1: <Adaptec aic7899 Ultra160 SCSI adapter> port 0xd800-0xd8ff mem 0xfeadf000-0xfeadffff irq 11 at device 5.1 on pci0 aic7899: Ultra160 Wide Channel B, SCSI Id=7, 32/253 SCBs fxp0: <Intel Pro 10/100B/100+ Ethernet> port 0xd400-0xd43f mem 0xfe900000-0xfe9fffff,0xfeadd000-0xfeaddfff irq 16 at device 6.0 on pci0 fxp0: Ethernet address 00:30:48:23:0e:af @@ -87,8 +87,8 @@ isa0: <ISA bus> on isab0 pci0: <mass storage, ATA> at device 15.1 (no driver attached) pci0: <serial bus, USB> at device 15.2 (no driver attached) -pcib4: <ACPI Host-PCI bridge> on acpi0 -acpi0: couldn't attach pci busdevice_probe_and_attach: pcib4 attach returned 6 +pcib2: <ACPI Host-PCI bridge> on acpi0 +acpi0: couldn't attach pci busdevice_probe_and_attach: pcib2 attach returned 6 atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0 atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 kbd0 at atkbd0 @@ -106,14 +106,9 @@ plip0: <PLIP network interface> on ppbus0 lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port -pcib4: <ACPI Host-PCI bridge> on acpi0 -acpi0: couldn't attach pci busdevice_probe_and_attach: pcib4 attach returned 6 +pcib2: <ACPI Host-PCI bridge> on acpi0 +acpi0: couldn't attach pci busdevice_probe_and_attach: pcib2 attach returned 6 fdc0: cmd 3 failed at out byte 1 of 3 -pcib2: <ServerWorks host to PCI bridge> at pcibus 2 on motherboard -pci2: <PCI bus> on pcib2 -IOAPIC #1 intpin 8 -> irq 19 -em0: <Intel(R) PRO/1000 Network Connection, Version - 1.3.14> port 0xef80-0xef9f mem 0xfebc0000-0xfebdffff,0xfebe0000-0xfebfffff irq 19 at device 2.0 on pci2 -em0: Speed:1000 Mbps Duplex:Full orm0: <Option ROMs> at iomem 0xd1800-0xd27ff,0xc0000-0xc87ff on isa0 fdc0: <enhanced floppy controller (i82077, NE72065 or clone)> at port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on isa0 fdc0: FIFO enabled, 8 bytes threshold @@ -122,10 +117,11 @@ sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 +Timecounters tick every 10.000 msec APIC_IO: Testing 8254 interrupt delivery APIC_IO: Broken MP table detected: 8254 is not connected to IOAPIC #0 intpin 2 APIC_IO: routing 8254 via 8259 and IOAPIC #0 intpin 0 -Timecounters tick every 10.000 msec +Initializing GEOMetry subsystem Waiting 15 seconds for SCSI devices to settle acpi_cpu: CPU throttling enabled, 16 steps from 100% to 6.2% da0 at ahc0 bus 0 target 0 lun 0 @@ -138,6 +134,18 @@ cd0: <TEAC CD-ROM CD-532S 3.0A> Removable CD-ROM SCSI-2 device cd0: 20.000MB/s transfers (20.000MHz, offset 16) cd0: Attempt to query device size failed: NOT READY, Medium not present +0000 00 fe ff ff 82 fe ff ff 36 e0 27 01 a3 05 18 00 |........6.'.....| +[0] f:00 typ:130 s(CHS):255/254/255 e(CHS):255/254/255 s:19390518 l:1574307 +0000 00 01 81 8d 05 fe bf ac 3f 00 00 00 e1 d7 07 00 |........?.......| +[1] f:00 typ:5 s(CHS):141/1/129 e(CHS):172/254/191 s:63 l:514017 +0000 00 02 81 8d 83 fe bf ac 3f 00 00 00 a2 d7 07 00 |........?.......| +[0] f:00 typ:131 s(CHS):141/2/129 e(CHS):172/254/191 s:63 l:513954 +0000 00 00 81 ad 05 fe ff ff 20 d8 07 00 d7 07 20 01 |........ ..... .| +[1] f:00 typ:5 s(CHS):173/0/129 e(CHS):255/254/255 s:514080 l:18876375 +0000 00 01 81 ad 83 fe ff ff 3f 00 00 00 98 07 20 01 |........?..... .| +[0] f:00 typ:131 s(CHS):173/1/129 e(CHS):255/254/255 s:63 l:18876312 +0000 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| +[1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 ohci0: <OHCI (generic) USB controller> mem 0xfeade000-0xfeadefff irq 17 at device 15.2 on pci0 usb0: OHCI version 1.0, legacy support usb0: <OHCI (generic) USB controller> on ohci0 -- Martin Nilsson - Home:<martin@gneto.com> Work:<martin@svenskabutiker.se> UNIX & Webb programmer/architect Malmö, Sweden FreeBSD - The power to serve. http://www.FreeBSD.org To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-current" in the body of the messagehelp
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?3DA80A18.5020900>