Date: Thu, 11 Jun 1998 11:30:31 +0100 (BST) From: Scott Mitchell <scott@dcs.qmw.ac.uk> To: Luigi Rizzo <luigi@labinfo.iet.unipi.it> Cc: multimedia@FreeBSD.ORG Subject: Re: audio from atapi cd -- patches for 2.2.6 Message-ID: <199806111030.LAA03758@hotpoint.dcs.qmw.ac.uk> In-Reply-To: <199806090842.KAA17652@labinfo.iet.unipi.it> References: <199806091014.LAA24933@hotpoint.dcs.qmw.ac.uk> <199806090842.KAA17652@labinfo.iet.unipi.it>
next in thread | previous in thread | raw e-mail | index | archive | help
Luigi Rizzo said: >I'd like to see the output of /var/run/dmesg.boot with and without my >patches. Here they are (both with DEBUG turned on in atapi.c). I've trimmed out the non IDE/ATAPI stuff. With stock 2.2.6 sources: [...] wdc0 at 0x1f0-0x1f7 irq 14 flags 0x80ff80ff on isa wdc0: unit 0 (wd0): <ST3660A>, multi-block-16 wd0: 520MB (1065456 sectors), 1057 cyls, 16 heads, 63 S/T, 512 B/S atapi0.1 at 0x1f0: attach called wdc0: unit 1 (atapi): <CD420E/1.01>, removable, iordy wcd0: info 80-85-0-0-0-0-0-0-0-0-0-0-0-0-0-0-0-0-0-0-0-0-0-0-0-0-0-0-0-0-0-0-0-0-0-0-0-0-0-0-3-0-0-2-0-0-31-2e-30-31-0-0-0-0-43-44-34-32-30-45-0-0-0-0-0-0-0-0-0-0-0-0-0-0-0-0-0-0-0-0-0-0-0-0-0-0-0-0-0-0-0-0-0-0-0-0-0-0-0-a-0-0-0-2-0-5-80-0-1-1f-0-0-0-43-52-45-41-54-49-56-45-43-44-34-32-30-45-20-20-20-20-20-20-20-20-20-20-31-2e-30-31-0-0-0-0-70-0-0 atapi0.1: req im 5a-0-2a-0-0-0-0-0-1c-0-0-0-0-0-0-0 len=28 atapi0.1: start atapi0.1: send cmd MODE_SENSE 5a-0-2a-0-0-0-0-0-1c-0-0-0-0-0-0-0 atapi0.1: intr ireason=0x1, len=28, status=50<ready,opdone>, error=0 atapi0.1: unknown phase wdc1 at 0x170-0x177 irq 15 flags 0x80ff80ff on isa wdc1: unit 0 (wd2): <QUANTUM FIREBALL1080A>, multi-block-8 wd2: 1039MB (2128896 sectors), 2112 cyls, 16 heads, 63 S/T, 512 B/S atapi1.0 at 0x170: attach called atapiX.0 at 0x170: identify not ready, status=51<ready,opdone,check> atapi1.1 at 0x170: attach called atapiX.1 at 0x170: identify not ready, status=0 With Luigi's patches: [...] wdc0 at 0x1f0-0x1f7 irq 14 flags 0x80ff80ff on isa wdc0: unit 0 (wd0): <ST3660A>, multi-block-16 wd0: 520MB (1065456 sectors), 1057 cyls, 16 heads, 63 S/T, 512 B/S atapi0.1 at 0x1f0: attach called wdc0: unit 1 (atapi): <CD420E/1.01>, removable, iordy wcd0: info 80-85-0-0-0-0-0-0-0-0-0-0-0-0-0-0-0-0-0-0-0-0-0-0-0-0-0-0-0-0-0-0-0-0-0-0-0-0-0-0-3-0-0-2-0-0-31-2e-30-31-0-0-0-0-43-44-34-32-30-45-0-0-0-0-0-0-0-0-0-0-0-0-0-0-0-0-0-0-0-0-0-0-0-0-0-0-0-0-0-0-0-0-0-0-0-0-0-0-0-a-0-0-0-2-0-5-80-0-1-1f-0-0-0-43-52-45-41-54-49-56-45-43-44-34-32-30-45-20-20-20-20-20-20-20-20-20-20-31-2e-30-31-0-0-0-0-70-0-0 atapi0.1: req im 5a-0-2a-0-0-0-0-0-1c-0-0-0-0-0-0-0 len=28 atapi0.1: start atapi0.1: send cmd MODE_SENSE 5a-0-2a-0-0-0-0-0-1c-0-0-0-0-0-0-0 atapi0.1: intr ireason=0x1, len=28, status=50<ready,opdone>, error=0 atapi0.1: unknown phase atapi0.1: req im 5a-0-2a-0-0-0-0-0-1c-0-0-0-0-0-0-0 len=28 atapi0.1: start atapi0.1: send cmd MODE_SENSE 5a-0-2a-0-0-0-0-0-1c-0-0-0-0-0-0-0 atapi0.1: intr ireason=0x1, len=28, status=50<ready,opdone>, error=0 atapi0.1: unknown phase atapi0.1: req im 5a-0-2a-0-0-0-0-0-1c-0-0-0-0-0-0-0 len=28 atapi0.1: start atapi0.1: send cmd MODE_SENSE 5a-0-2a-0-0-0-0-0-1c-0-0-0-0-0-0-0 atapi0.1: intr ireason=0x1, len=28, status=50<ready,opdone>, error=0 atapi0.1: unknown phase atapi0.1: req im 5a-0-2a-0-0-0-0-0-1c-0-0-0-0-0-0-0 len=28 atapi0.1: start atapi0.1: send cmd MODE_SENSE 5a-0-2a-0-0-0-0-0-1c-0-0-0-0-0-0-0 atapi0.1: intr ireason=0x1, len=28, status=50<ready,opdone>, error=0 atapi0.1: unknown phase atapi0.1: req im 5a-0-2a-0-0-0-0-0-1c-0-0-0-0-0-0-0 len=28 atapi0.1: start atapi0.1: send cmd MODE_SENSE 5a-0-2a-0-0-0-0-0-1c-0-0-0-0-0-0-0 atapi0.1: intr ireason=0x1, len=28, status=50<ready,opdone>, error=0 atapi0.1: unknown phase atapi0.1: req im 5a-0-2a-0-0-0-0-0-1c-0-0-0-0-0-0-0 len=28 atapi0.1: start atapi0.1: send cmd MODE_SENSE 5a-0-2a-0-0-0-0-0-1c-0-0-0-0-0-0-0 atapi0.1: intr ireason=0x1, len=28, status=50<ready,opdone>, error=0 atapi0.1: unknown phase atapi0.1: req im 5a-0-2a-0-0-0-0-0-1c-0-0-0-0-0-0-0 len=28 atapi0.1: start atapi0.1: send cmd MODE_SENSE 5a-0-2a-0-0-0-0-0-1c-0-0-0-0-0-0-0 atapi0.1: intr ireason=0x1, len=28, status=50<ready,opdone>, error=0 atapi0.1: unknown phase atapi0.1: req im 5a-0-2a-0-0-0-0-0-1c-0-0-0-0-0-0-0 len=28 atapi0.1: start atapi0.1: send cmd MODE_SENSE 5a-0-2a-0-0-0-0-0-1c-0-0-0-0-0-0-0 atapi0.1: intr ireason=0x1, len=28, status=50<ready,opdone>, error=0 atapi0.1: unknown phase atapi0.1: req im 5a-0-2a-0-0-0-0-0-1c-0-0-0-0-0-0-0 len=28 atapi0.1: start atapi0.1: send cmd MODE_SENSE 5a-0-2a-0-0-0-0-0-1c-0-0-0-0-0-0-0 atapi0.1: intr ireason=0x1, len=28, status=50<ready,opdone>, error=0 atapi0.1: unknown phase atapi0.1: req im 5a-0-2a-0-0-0-0-0-1c-0-0-0-0-0-0-0 len=28 atapi0.1: start atapi0.1: send cmd MODE_SENSE 5a-0-2a-0-0-0-0-0-1c-0-0-0-0-0-0-0 atapi0.1: intr ireason=0x1, len=28, status=50<ready,opdone>, error=0 atapi0.1: unknown phase wdc1 at 0x170-0x177 irq 15 flags 0x80ff80ff on isa wdc1: unit 0 (wd2): <QUANTUM FIREBALL1080A>, multi-block-8 wd2: 1039MB (2128896 sectors), 2112 cyls, 16 heads, 63 S/T, 512 B/S atapi1.0 at 0x170: attach called atapiX.0 at 0x170: identify not ready, status=51<ready,opdone,check> atapi1.1 at 0x170: attach called atapiX.1 at 0x170: identify not ready, status=0 Unfortunately I haven't had time to look at it any more since Tuesday. Hope this info is some help. Scott -- =========================================================================== Scott Mitchell | PGP Key ID |"If I can't have my coffee, I'm just <scott@dcs.qmw.ac.uk> | 0x54B171B9 | like a dried up piece of roast goat" QMW College, London, UK | 0xAA775B8B | -- J. S. Bach. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-multimedia" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?199806111030.LAA03758>